Print Report | Back to Sample Detail

Sample Record for 2013-04-30-8515463

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 3395 DEA: 06324504 EFIS: 0600000366 QA Service Level: 1
DIST-CO-RTE-PM: 06-TUL,FRE-99-41.3/R53.9,R0.0/R1.2
Work Description: WIDEN 4 LANES TO 6 LANES.
Location Description: TULARE AND FRESNO COUNTIES IN AND NEAR KINGSBURG FROM 0.2 MILE NORTH OF NORTH GOSHEN OVERHEAD TO 0.2 MILE NORTH OF ROUTE 99/201 CONEJO AVENUE SEPARATION
Contractor Name: DIABLO CONTRACTORS INC
Contractor Address: 7 CROW CANYON COURT, SUITE 100, SAN RAMON, CA 94583
Resident Engineer: Haidar Haddadin Structure Rep.: Moua, Peter

Sample Information

DIME Sample ID: 2013-04-30-8515463
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Sample Organization Contact: (916) 227-7204
Type of Sample: Annual Source Testing
Type of Material: Aggregate
Sample Taken Date: 04/30/2013
Date that the sample was received by the laboratory/organization performing the testing: 04/16/2013
The quantity of what the sample constitutes: 1 Bag
A brief description of the sample: 1x4
From where was the sample collected: Source
Laboratory sample identification: C787039A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan

Material Information

Source Identification (SMARA or name of Pit): Friant
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size:
The concrete mix design number:
Lot number:
Sublot number:

Test Results

Test Information 1 of 1

DIME Test ID: 2013-04-30-8515463-1
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Verified Date: 05/01/2013
Date Tested: 04/30/2013
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Additional Comments When Verified:
Percentage Loss of material retained on 2 x 1 ½ in. sieve no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve no data
Percentage Loss of material retained on 1 x ¾ in. sieve no data
Percentage Loss of material retained on ¾ x ½ in. sieve no data
Percentage Loss of material retained on ½ x ⅜ in. sieve no data
Percentage Loss of material retained on ⅜ in. x #4 sieve no data
Weighted Average Percent Loss of Coarse Aggregate 2.4 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.