DIMEXML for Test Method

ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens


The Office of Structural Material (OSM) of Caltrans has defined an XML schema for each of the material types for the purpose of storing and sharing material test data. An XML schema defines a type of XML format. An XML file is accepted by a system if and only if the XML file can be validated against the schema defined by or supported by the system. For a more descriptive explanation, please visit Wiki: XML Schema. In order to use the batch upload feature to submit data to DIME, the test data has to be written in XML format that can be validated against one of the DIMEXML schemas. These files are referred to as DIMEXML files hereon.

DIMEXML files, or XML files in general, can be created with any text edidtor. However, it is strongly encouraged to have XML file created by software if a data management system is already in place to manage lab test data. Please remember, an XML file must be validated against one of the DIMEXML Schemas before it can be uploaded to DIME.

This page illustrates what are included in an DIMEXML file with a single ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens test result. Please note, however, that each of the DIMEXML schemas allows a sample to include any number of test results from any combination of test methods.

DIME allows users to submit brand new samples or to add new test results to existing samples by uploading DIMEXML files. While these two use cases require two different DIMEXML formats, please be sure to view the correct tab below for the intended purpose.

Below are some links that you may find helpful:
  • Not registered for DIME? Check this page out to find out how you can register for DIME: Register for DIME.
  • Not sure what DIME Project ID is for your project? Look it up on this page: DIME Project ID Lookup.
  • DIME also supports submitting data using online forms. Instructions for submitting data using online forms are available Here .
  • To see a full list of supported test methods, please visit Test Catalog Page.
  • To view or download the complete DIMEXML schemas, visit DIMEXML Schema Page.
  • There are many XML validation tools. For a free online tool, try XML Validation Tool.
  • DIMEXML empty structures will be available for download for each of the variations for the test method. Check back later.
  • Instructions on how to upload DIMEXML files to DIME: Upload DIMEXML Instructions

ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens DIMEXML Structure

DIMEXML structure for a sample that includes test results for this test method is described in three sections on the page.
  • Element by Elment section describes the structure element by element starting from the root with a depth-first approach until all elements are mentioned.
  • Treeview section provides an complete overview of DIMEXML in a tree-like structure.
  • Tag Definitions section describes each of the tag elments in greater details.
  • * indicates required fields
Also, there are minor differences in the the DIMEXML structures for a new sample record and for an existing sample record. Be sure to look at the "DIMEXML Structure for New Sample" tab for new samples and "DIMEXML Structure for Exiting Sample" tab for existing samples.

Element by Element

Jump to Treeview | Jump to Tag Definitions
Root Element: <Concrete_dimexml>

The root element for a new sample in Concrete DIMEXML format is Concrete_dimexml, and it requires two child elements, new_sample and tests.

<Concrete_dimexml>
  <new_sample></new_sample>*<!-- complex element. See Child Element: <new_sample> below. -->
  <tests></tests>*<!-- complex element.  See Child Element: <tests> below. -->
</Concrete_dimexml>*

Child Element: <new_sample> Jump to tag definitions

new_sample requires two fields and two complext types.

<new_sample>
  <sample_project_id></sample_project_id>*<!-- DIME Project ID, look it up using the DIME Project ID Lookup page at https://dime.dot.ca.gov/index.php?r=project/projectIDLookup. -->
  <sample_taken_date></sample_taken_date>*<!-- sample taken date, must be in date format: yyyy-mm-dd -->
  <sample_meta_data></sample_meta_data>*<!-- complex element, see below -->
  <material_identification></material_identification>*<!-- complex element, see below -->
</new_sample>*
Child Element: <sample_meta_data> Jump to tag definitions

sample_meta_data is for storing sample meta data about the sample.

<sample_meta_data>
  <sample_received></sample_received>*<!-- Will the laboratory/organization for which you are a member perform testing on this material sample? -->
  <sample_date_received></sample_date_received><!-- Date that the sample was received by the laboratory/organization performing the testing -->
  <sample_type_name></sample_type_name>*<!-- Sample type -->
  <sample_constitutes></sample_constitutes>*<!-- The quantity of what the sample constitutes -->
  <sample_description></sample_description>*<!-- A brief description of the sample -->
  <sampler_first_name></sampler_first_name>*<!-- First name of sampler or witnessed by -->
  <sampler_last_name></sampler_last_name>*<!-- Last name of sampler or witnessed by -->
  <sampler_title></sampler_title><!-- Title of sampler -->
  <sampler_telephone></sampler_telephone><!-- Telephone number of sampler -->
  <sample_taken_from_source></sample_taken_from_source>*<!-- From where was the sample collected -->
  <sample_source_name></sample_source_name>*<!-- The fabricator/manufacturer/facility name -->
  <sample_laboratory_id></sample_laboratory_id><!-- Laboratory sample identification -->
  <linked_sample></linked_sample><!-- Linked DIME Sample ID -->
  <sample_tl_number></sample_tl_number><!-- Transportation Laboratory (TL) Number -->
  <lot_number_on_tl></lot_number_on_tl><!-- Inspector Lot Number from the Transportation Laboratory (TL) Form -->
  <structure_unique_id></structure_unique_id><!-- Structure unique identifier -->
  <structure_name></structure_name><!-- Structure name -->
</sample_meta_data>	
Child Element: <material_identification> Jump to tag definitions

material_identification is for sample's material identification information.

<material_identification>
  <material_concrete_mix_num></material_concrete_mix_num>*<!-- The concrete mix design number -->
  <material_truck_number></material_truck_number><!-- The truck number from where the sample was collected -->
  <material_batch_plant_ticket_num></material_batch_plant_ticket_num>*<!-- The batch plant ticket number from where the sample was collected -->
  <material_batch_plant_number></material_batch_plant_number><!-- Concrete batch plant -->
  <material_designation></material_designation><!-- The fabricator/manufacturer designation for the sample -->
  <material_location_description></material_location_description>*<!-- A detailed description of where the material sample was collected -->
  <material_placement></material_placement><!-- Where the material sample would have been placed if not sampled -->
  <concrete_material_from_lot_no></concrete_material_from_lot_no><!-- From Lot No. -->
  <concrete_material_bag_lot_no></concrete_material_bag_lot_no><!-- Bag Lot No. -->
</material_identification>
Child Element: <tests>

tests element may contain any number of test results from any combinations of test methods made for this sample. However, in this page, only the ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens test result element is described, and <astm_c_39_v_10> is the tag elment for indicating that the test result is for ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.

<tests>
  <astm_c_39_v_10>
    <test_meta_data></test_meta_data>*<!-- complex element, see blow-->
    <test_results></test_results>*<!-- complex element, see below -->
  <astm_c_39_v_10>
</tests>
Child Element: <test_meta_data> Jump to tag definitions

<test_meta_data> requires name_tester and date_tested, and allows for the following optional fields, result_compliance_status, result_compliance_status_comments, test_comments.

<test_meta_data>
  <name_tester></name_tester>*<!-- Tester's full name -->
  <date_tested></date_tested>*<!-- Date of test -->
  <test_comments></test_comments><!-- General comments (publicly viewable) (Max 250 characters) -->
  <result_compliance_status></result_compliance_status><!-- Test result compliance -->
  <result_compliance_status_comments></result_compliance_status_comments><!-- Project test result compliance comments (Max 250 characters) -->
</test_meta_data>
Child Element: <test_results> Jump to tag definitions

This test method requires users to answer the following question(s) before the required/optional field(s) are determined.

  • (Tag ID: 6179) - Unit system used?. Possible answers: I Units,US Units
  • (Tag ID: 6180) - Number of specimens. Possible answers: ,2,3,4,5,6
  • (Tag ID: 6545) - Test performed. Possible answers: ith no density determined,With density determined by dimension measurements,With density determined from submerged weighing
Combining each answer from the questions above, this test method allows for the following variations. However, the DIMEXML schema requires the DIMEXML files to have one and only one of the variations for test results.

<test_results>
  <data__6179__SI_Units__6180__1__6545__With_no_density_determined></data__6179__SI_Units__6180__1__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__2__6545__With_no_density_determined></data__6179__SI_Units__6180__2__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__3__6545__With_no_density_determined></data__6179__SI_Units__6180__3__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__4__6545__With_no_density_determined></data__6179__SI_Units__6180__4__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__5__6545__With_no_density_determined></data__6179__SI_Units__6180__5__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__6__6545__With_no_density_determined></data__6179__SI_Units__6180__6__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__1__6545__With_no_density_determined></data__6179__US_Units__6180__1__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__2__6545__With_no_density_determined></data__6179__US_Units__6180__2__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__3__6545__With_no_density_determined></data__6179__US_Units__6180__3__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__4__6545__With_no_density_determined></data__6179__US_Units__6180__4__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__5__6545__With_no_density_determined></data__6179__US_Units__6180__5__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__6__6545__With_no_density_determined></data__6179__US_Units__6180__6__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
</test_results>		
Child Element: <data__6179__SI_Units__6180__1__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 1
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__1__6545__With_no_density_determined>
  <cylinder_cs_area_ASTMC39_1></cylinder_cs_area_ASTMC39_1>*<!-- Cross sectional area of cylinder 1 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_11></comp_strength_ASTMC39_11>*<!-- Compressive strength of cylinder (to nearest 0.1MPa) -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__1__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
  <density_cylinder_ASTMC39_1></density_cylinder_ASTMC39_1><!-- Density of cylinder -->
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__2__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 2
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__2__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_6></comp_strength_ASTMC39_6>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__2__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_6></cylinder_avg_density_ASTMC39_6><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
  <cylinder_avg_density_ASTMC39_16></cylinder_avg_density_ASTMC39_16><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__3__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 3
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__3__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_7></comp_strength_ASTMC39_7>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__3__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_7></cylinder_avg_density_ASTMC39_7><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_17></cylinder_avg_density_ASTMC39_17><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__4__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 4
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__4__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_2></cylinder_cs_area_4_ASTMC39_2>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_ASTMC39_8></comp_strength_ASTMC39_8>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_10></comp_strength_1_ASTMC39_10>*<!-- Compressive strength of cylinder 4 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_2></max_load_4_ASTMC39_2>*<!-- Maximum load on cylinder 4 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__4__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_8></cylinder_avg_density_ASTMC39_8><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_2></cylinder_length_4_ASTMC39_2><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_2></density_cylinder_4_ASTMC39_2><!-- Density of cylinder 4 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_18></cylinder_avg_density_ASTMC39_18><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_2></mass_submerged_cylinder_4_ASTMC39_2><!-- Apparent mass of submerged cylinder 4 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_4></density_cylinder_4_ASTMC39_4><!-- Density of cylinder 4 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <vol_submerged_ASTMC39_8></vol_submerged_ASTMC39_8><!-- Volume determined from submerged weighing, specimen 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__5__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 5
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__5__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_2></cylinder_cs_area_4_ASTMC39_2>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_2></cylinder_cs_area_5_ASTMC39_2>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <comp_strength_ASTMC39_9></comp_strength_ASTMC39_9>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_10></comp_strength_1_ASTMC39_10>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_12></comp_strength_1_ASTMC39_12>*<!-- Compressive strength of cylinder 5 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_2></max_load_4_ASTMC39_2>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_2></max_load_5_ASTMC39_2>*<!-- Maximum load on cylinder 5 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__5__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_9></cylinder_avg_density_ASTMC39_9><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_2></cylinder_length_4_ASTMC39_2><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_2></density_cylinder_4_ASTMC39_2><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_2></cylinder_length_5_ASTMC39_2><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_2></density_cylinder_5_ASTMC39_2><!-- Density of cylinder 5 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_19></cylinder_avg_density_ASTMC39_19><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_2></mass_submerged_cylinder_4_ASTMC39_2><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_2></mass_submerged_cylinder_5_ASTMC39_2><!-- Apparent mass of submerged cylinder 5 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_4></density_cylinder_4_ASTMC39_4><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_4></density_cylinder_5_ASTMC39_4><!-- Density of cylinder 5 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <vol_submerged_ASTMC39_8></vol_submerged_ASTMC39_8><!-- Volume determined from submerged weighing, specimen 4 -->
  <vol_submerged_ASTMC39_10></vol_submerged_ASTMC39_10><!-- Volume determined from submerged weighing, specimen 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__6__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 6
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__6__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_2></cylinder_cs_area_4_ASTMC39_2>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_2></cylinder_cs_area_5_ASTMC39_2>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_cs_area_6_ASTMC39_2></cylinder_cs_area_6_ASTMC39_2>*<!-- Cross sectional area of cylinder 6 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <comp_strength_ASTMC39_10></comp_strength_ASTMC39_10>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_10></comp_strength_1_ASTMC39_10>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_12></comp_strength_1_ASTMC39_12>*<!-- Compressive strength of cylinder 5 -->
  <cylinder_avg_dia_6_ASTMC39></cylinder_avg_dia_6_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <comp_strength_6_ASTMC39></comp_strength_6_ASTMC39>*<!-- Compressive strength of cylinder 6 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_2></max_load_4_ASTMC39_2>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_2></max_load_5_ASTMC39_2>*<!-- Maximum load on cylinder 5 -->
  <max_load_6_ASTMC39_2></max_load_6_ASTMC39_2>*<!-- Maximum load on cylinder 6 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <fracture_type_6_ASTMC39></fracture_type_6_ASTMC39>*<!-- Type of fracture pattern of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <correction_factor_ASTMC39_6></correction_factor_ASTMC39_6>*<!-- Correction factor for cylinder 6 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__6__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <cylinder_avg_density_ASTMC39_10></cylinder_avg_density_ASTMC39_10><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_6_ASTMC39_2></mass_cylinder_6_ASTMC39_2><!-- In air mass of cylinder 6 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_2></cylinder_length_4_ASTMC39_2><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_2></density_cylinder_4_ASTMC39_2><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_2></cylinder_length_5_ASTMC39_2><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_2></density_cylinder_5_ASTMC39_2><!-- Density of cylinder 5 -->
  <cylinder_length_6_ASTMC39_2></cylinder_length_6_ASTMC39_2><!-- Length of cylinder 6 -->
  <density_cylinder_6_ASTMC39_2></density_cylinder_6_ASTMC39_2><!-- Density of cylinder 6 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_avg_dia_6_ASTMC39></cylinder_avg_dia_6_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_20></cylinder_avg_density_ASTMC39_20><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <mass_cylinder_6_ASTMC39_2></mass_cylinder_6_ASTMC39_2><!-- In air mass of cylinder 6 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_2></mass_submerged_cylinder_4_ASTMC39_2><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_2></mass_submerged_cylinder_5_ASTMC39_2><!-- Apparent mass of submerged cylinder 5 -->
  <mass_submerged_cylinder_6_ASTMC39_2></mass_submerged_cylinder_6_ASTMC39_2><!-- Apparent mass of submerged cylinder 6 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_4></density_cylinder_4_ASTMC39_4><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_4></density_cylinder_5_ASTMC39_4><!-- Density of cylinder 5 -->
  <density_cylinder_6_ASTMC39_4></density_cylinder_6_ASTMC39_4><!-- Density of cylinder 6 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <vol_submerged_ASTMC39_8></vol_submerged_ASTMC39_8><!-- Volume determined from submerged weighing, specimen 4 -->
  <vol_submerged_ASTMC39_10></vol_submerged_ASTMC39_10><!-- Volume determined from submerged weighing, specimen 5 -->
  <vol_submerged_ASTMC39_12></vol_submerged_ASTMC39_12><!-- Volume determined from submerged weighing, specimen 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__1__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 1
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__1__6545__With_no_density_determined>
  <cylinder_cs_area_ASTMC39_2></cylinder_cs_area_ASTMC39_2>*<!-- Cross sectional area of cylinder 1 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_12></comp_strength_ASTMC39_12>*<!-- Compressive strength of cylinder  (to nearest 10 psi) -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__1__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
  <density_cylinder_ASTMC39_2></density_cylinder_ASTMC39_2><!-- Density of cylinder -->
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
  <density_cylinder_ASTMC39_3></density_cylinder_ASTMC39_3><!-- Density of cylinder -->
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__2__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 2
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__2__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_1></comp_strength_ASTMC39_1>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__2__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_1></cylinder_avg_density_ASTMC39_1><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
  <cylinder_avg_density_ASTMC39_11></cylinder_avg_density_ASTMC39_11><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__3__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 3
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__3__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_2></comp_strength_ASTMC39_2>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__3__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_2></cylinder_avg_density_ASTMC39_2><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_12></cylinder_avg_density_ASTMC39_12><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__4__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 4
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__4__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_1></cylinder_cs_area_4_ASTMC39_1>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_ASTMC39_3></comp_strength_ASTMC39_3>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_9></comp_strength_1_ASTMC39_9>*<!-- Compressive strength of cylinder 4 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_1></max_load_4_ASTMC39_1>*<!-- Maximum load on cylinder 4 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__4__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_3></cylinder_avg_density_ASTMC39_3><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_1></cylinder_length_4_ASTMC39_1><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_1></density_cylinder_4_ASTMC39_1><!-- Density of cylinder 4 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_13></cylinder_avg_density_ASTMC39_13><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_1></mass_submerged_cylinder_4_ASTMC39_1><!-- Apparent mass of submerged cylinder 4 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_3></density_cylinder_4_ASTMC39_3><!-- Density of cylinder 4 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <vol_submerged_ASTMC39_7></vol_submerged_ASTMC39_7><!-- Volume determined from submerged weighing, cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__5__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 5
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__5__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_1></cylinder_cs_area_4_ASTMC39_1>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_1></cylinder_cs_area_5_ASTMC39_1>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_ASTMC39_4></comp_strength_ASTMC39_4>*<!-- Compressive strength (to nearest 10 psi) -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_9></comp_strength_1_ASTMC39_9>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_11></comp_strength_1_ASTMC39_11>*<!-- Compressive strength of cylinder 5 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_1></max_load_4_ASTMC39_1>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_1></max_load_5_ASTMC39_1>*<!-- Maximum load on cylinder 5 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__5__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_4></cylinder_avg_density_ASTMC39_4><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_1></cylinder_length_4_ASTMC39_1><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_1></density_cylinder_4_ASTMC39_1><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_1></cylinder_length_5_ASTMC39_1><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_1></density_cylinder_5_ASTMC39_1><!-- Density of cylinder 5 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_14></cylinder_avg_density_ASTMC39_14><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_1></mass_submerged_cylinder_4_ASTMC39_1><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_1></mass_submerged_cylinder_5_ASTMC39_1><!-- Apparent mass of submerged cylinder 5 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_3></density_cylinder_4_ASTMC39_3><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_3></density_cylinder_5_ASTMC39_3><!-- Density of cylinder 5 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <vol_submerged_ASTMC39_7></vol_submerged_ASTMC39_7><!-- Volume determined from submerged weighing, cylinder 4 -->
  <vol_submerged_ASTMC39_9></vol_submerged_ASTMC39_9><!-- Volume determined from submerged weighing, cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__6__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 6
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__6__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_1></cylinder_cs_area_4_ASTMC39_1>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_1></cylinder_cs_area_5_ASTMC39_1>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_cs_area_6_ASTMC39_1></cylinder_cs_area_6_ASTMC39_1>*<!-- Cross sectional area of cylinder 6 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <comp_strength_ASTMC39_5></comp_strength_ASTMC39_5>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_9></comp_strength_1_ASTMC39_9>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_11></comp_strength_1_ASTMC39_11>*<!-- Compressive strength of cylinder 5 -->
  <cylinder_avg_dia_6_t6107_ASTMC39></cylinder_avg_dia_6_t6107_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <comp_strength_6_t6256_ASTMC39></comp_strength_6_t6256_ASTMC39>*<!-- Compressive strength of cylinder 6 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_1></max_load_4_ASTMC39_1>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_1></max_load_5_ASTMC39_1>*<!-- Maximum load on cylinder 5 -->
  <max_load_6_ASTMC39_1></max_load_6_ASTMC39_1>*<!-- Maximum load on cylinder 6 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <fracture_type_6_ASTMC39></fracture_type_6_ASTMC39>*<!-- Type of fracture pattern of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <correction_factor_ASTMC39_6></correction_factor_ASTMC39_6>*<!-- Correction factor for cylinder 6 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__6__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <cylinder_avg_density_ASTMC39_5></cylinder_avg_density_ASTMC39_5><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_6_ASTMC39_1></mass_cylinder_6_ASTMC39_1><!-- In air mass of cylinder 6 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_1></cylinder_length_4_ASTMC39_1><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_1></density_cylinder_4_ASTMC39_1><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_1></cylinder_length_5_ASTMC39_1><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_1></density_cylinder_5_ASTMC39_1><!-- Density of cylinder 5 -->
  <cylinder_length_6_ASTMC39_1></cylinder_length_6_ASTMC39_1><!-- Length of cylinder 6 -->
  <density_cylinder_6_ASTMC39_1></density_cylinder_6_ASTMC39_1><!-- Density of cylinder 6 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_avg_dia_6_t6107_ASTMC39></cylinder_avg_dia_6_t6107_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_15></cylinder_avg_density_ASTMC39_15><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <mass_cylinder_6_ASTMC39_1></mass_cylinder_6_ASTMC39_1><!-- In air mass of cylinder 6 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_1></mass_submerged_cylinder_4_ASTMC39_1><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_1></mass_submerged_cylinder_5_ASTMC39_1><!-- Apparent mass of submerged cylinder 5 -->
  <mass_submerged_cylinder_6_ASTMC39_1></mass_submerged_cylinder_6_ASTMC39_1><!-- Apparent mass of submerged cylinder 6 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_3></density_cylinder_4_ASTMC39_3><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_3></density_cylinder_5_ASTMC39_3><!-- Density of cylinder 5 -->
  <density_cylinder_6_ASTMC39_3></density_cylinder_6_ASTMC39_3><!-- Density of cylinder 6 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <vol_submerged_ASTMC39_7></vol_submerged_ASTMC39_7><!-- Volume determined from submerged weighing, cylinder 4 -->
  <vol_submerged_ASTMC39_9></vol_submerged_ASTMC39_9><!-- Volume determined from submerged weighing, cylinder 5 -->
  <vol_submerged_ASTMC39_11></vol_submerged_ASTMC39_11><!-- Volume determined from submerged weighing, cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>

DIMEXML Structure Treeviews

Jump to Element by Element | Jump to Tag Definitions
- Click the icons to collapse the DIMEXML sample structure tree.
- * indicates required fields
- indiciates tags can be referred to the corresponding tables for detailed requirements.
  • Concrete_dimexml
    • new_sample*Jump to tag definitions
      • dime_project_id*
      • sample_taken_date*
      • sample_meta_data*Jump to tag definitions
        • sample_received*
        • sample_date_received
        • sample_type_name*
        • sample_constitutes*
        • sample_description*
        • sampler_first_name*
        • sampler_last_name*
        • sampler_title
        • sampler_telephone
        • sample_taken_from_source*
        • sample_source_name*
        • sample_laboratory_id
        • linked_sample
        • sample_tl_number
        • lot_number_on_tl
        • structure_unique_id
        • structure_name
      • material_identification*Jump to tag definitions
        • sample_received*
        • sample_date_received
        • sample_type_name*
        • sample_constitutes*
        • sample_description*
        • sampler_first_name*
        • sampler_last_name*
        • sampler_title
        • sampler_telephone
        • sample_taken_from_source*
        • sample_source_name*
        • sample_laboratory_id
        • linked_sample
        • sample_tl_number
        • lot_number_on_tl
        • structure_unique_id
        • structure_name
    • tests*
      • astm_c_39_v_10*
        • test_meta_data*Jump to tag definitions
          • name_tester*
          • date_tested*
          • result_compliance_status
          • result_compliance_status_comments
          • test_comments
        • test_results * (Requires Tags from One of Test Method Variations Below) Jump to tag definitions
          • data__6179__SI_Units__6180__1__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__2__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__3__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__4__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__5__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__6__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__1__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__2__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__3__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__4__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__5__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__6__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)

Tag Definitions

Jump to Element by Element | Jump to Treeview
new_sample
Total of 3 tags
LabelTagRequired?Base TypeValue RestrictionUnit Required?Unit Restriction
DIME Project IDsample_project_idRequiredstringpattern:\d{1,25}NoN/A
Date the sample is takensample_taken_dateRequireddate NoN/A
Sample unique sequential digitssample_unique_keyOptionalstringpattern:\d{8,16}NoN/A
sample_meta_data
Total of 17 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Will the laboratory/organization for which you are a member perform testing on this material sample?sample_receivedRequiredstringenumeration:,Yes,NoNoN/A
Date that the sample was received by the laboratory/organization performing the testingsample_date_receivedOptionaldate NoN/A
Sample typesample_type_nameRequiredstringenumeration: ,Quality Control,Verification,Quality Assurance,Dispute Resolution,Acceptance,Annual Source Testing,Per Request,Preliminary,Independent Assurance,Informational,Control Sample,Stock,Authorization,Proficiency,Recertification,Retest,Aggregate Prequalification ProgramNoN/A
The quantity of what the sample constitutessample_constitutesRequiredstringpattern:.{1,100}NoN/A
A brief description of the samplesample_descriptionRequiredstringpattern:.{1,255}NoN/A
First name of sampler or witnessed bysampler_first_nameRequiredstringpattern:[\w\s]{1,100}NoN/A
Last name of sampler or witnessed bysampler_last_nameRequiredstringpattern:[\w\s]{1,100}NoN/A
Title of samplersampler_titleOptionalstringpattern:[\w\s]{0,100}NoN/A
Telephone number of samplersampler_telephoneOptionalstringpattern:[0-9\(\)\- ]{9,20}|UnknownNoN/A
From where was the sample collectedsample_taken_from_sourceRequiredstringenumeration:,Source,Job Site,Fabricator,Manufacturer,Distributor,OtherNoN/A
The fabricator/manufacturer/facility namesample_source_nameRequiredstringpattern:[\w\s,-]{1,100}NoN/A
Laboratory sample identificationsample_laboratory_idOptionalstringpattern:[\w\s,+-]{1,100}NoN/A
Linked DIME Sample IDlinked_sampleOptionalstring NoN/A
Transportation Laboratory (TL) Numbersample_tl_numberOptionalstringpattern:[\w\s+-]{1,100}NoN/A
Inspector Lot Number from the Transportation Laboratory (TL) Formlot_number_on_tlOptionalstringpattern:[\w\s,/-]{1,255}NoN/A
Structure unique identifierstructure_unique_idOptionalstringpattern:\d{2}\-.*NoN/A
Structure namestructure_nameOptionalstringpattern:[\w\s-,/]{1,100}NoN/A
material_identification
Total of 9 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
The concrete mix design numbermaterial_concrete_mix_numRequiredstringpattern:[\w\s+-]{1,20}NoN/A
The truck number from where the sample was collectedmaterial_truck_numberOptionalstringpattern:[\w\s]{0,100}NoN/A
The batch plant ticket number from where the sample was collectedmaterial_batch_plant_ticket_numRequiredstringpattern:[\w\s-]{1,20}NoN/A
Concrete batch plantmaterial_batch_plant_numberOptionalstringpattern:[\w\s]{0,100}NoN/A
The fabricator/manufacturer designation for the samplematerial_designationOptionalstringpattern:[\w\s-./]{0,100}NoN/A
A detailed description of where the material sample was collectedmaterial_location_descriptionRequiredstringpattern:[\w\s\-,.@]{1,100}NoN/A
Where the material sample would have been placed if not sampledmaterial_placementOptionalstringpattern:[\w\s]{0,100}NoN/A
From Lot No.concrete_material_from_lot_noOptionalstringpattern:[\w\s]{0,45}NoN/A
Bag Lot No.concrete_material_bag_lot_noOptionalstringpattern:[\w\s]{0,45}NoN/A
test_meta_data
Total of 6 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Test identification numbersample_id_numberOptionalstringpattern:\d{1,8}NoN/A
Tester's full namename_testerRequiredstringpattern:[\w\s\\/,.-]{1,100}NoN/A
Date of testdate_testedRequireddate NoN/A
General comments (publicly viewable) (Max 250 characters)test_commentsOptionalstringpattern:[=!@#&amp;$%*()-,.\w\s\d\-:;\\/]{0,250}NoN/A
Test result complianceresult_compliance_statusOptionalstringenumeration: ,complies,does not comply,not applicableNoN/A
Project test result compliance comments (Max 250 characters)result_compliance_status_commentsOptionalstringpattern:[=!@#&amp;$%*()-,.\w\s\d\-:]{0,250}NoN/A
Test Method Variation Tables

Variation(combo tag): data__6179__SI_Units__6180__1__6545__With_no_density_determined

data__6179__SI_Units__6180__1__6545__With_no_density_determined
Total of 9 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength of cylinder (to nearest 0.1MPa)comp_strength_ASTMC39_11Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements
Total of 4 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing
Total of 5 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Density of cylinderdensity_cylinder_ASTMC39_1OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__2__6545__With_no_density_determined

data__6179__SI_Units__6180__2__6545__With_no_density_determined
Total of 16 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_6Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_6OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_16OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__3__6545__With_no_density_determined

data__6179__SI_Units__6180__3__6545__With_no_density_determined
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_7Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_7OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_17OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__4__6545__With_no_density_determined

data__6179__SI_Units__6180__4__6545__With_no_density_determined
Total of 28 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_8Requireddecimalpattern:\d*\.\d{1}YesMPa
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 4comp_strength_1_ASTMC39_10RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 4max_load_4_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_8OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 4cylinder_length_4_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 4density_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_18OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 4density_cylinder_4_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 4vol_submerged_ASTMC39_8Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__5__6545__With_no_density_determined

data__6179__SI_Units__6180__5__6545__With_no_density_determined
Total of 34 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_9Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 4comp_strength_1_ASTMC39_10RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 5comp_strength_1_ASTMC39_12RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 4max_load_4_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 5max_load_5_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_9OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 4cylinder_length_4_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 4density_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 5cylinder_length_5_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 5density_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_19OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 4density_cylinder_4_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 5density_cylinder_5_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 4vol_submerged_ASTMC39_8Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 5vol_submerged_ASTMC39_10Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__6__6545__With_no_density_determined

data__6179__SI_Units__6180__6__6545__With_no_density_determined
Total of 40 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 6cylinder_cs_area_6_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_10Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 4comp_strength_1_ASTMC39_10RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 5comp_strength_1_ASTMC39_12RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 6cylinder_avg_dia_6_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 6comp_strength_6_ASTMC39RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 4max_load_4_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 5max_load_5_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 6max_load_6_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 6fracture_type_6_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 6correction_factor_ASTMC39_6Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_10OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 6mass_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 4cylinder_length_4_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 4density_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 5cylinder_length_5_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 5density_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 6cylinder_length_6_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 6density_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 6cylinder_avg_dia_6_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_20OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 6mass_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 6mass_submerged_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 4density_cylinder_4_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 5density_cylinder_5_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 6density_cylinder_6_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 4vol_submerged_ASTMC39_8Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 5vol_submerged_ASTMC39_10Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 6vol_submerged_ASTMC39_12Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__1__6545__With_no_density_determined

data__6179__US_Units__6180__1__6545__With_no_density_determined
Total of 9 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength of cylinder (to nearest 10 psi)comp_strength_ASTMC39_12RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements
Total of 5 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Density of cylinderdensity_cylinder_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing
Total of 5 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Density of cylinderdensity_cylinder_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__2__6545__With_no_density_determined

data__6179__US_Units__6180__2__6545__With_no_density_determined
Total of 16 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_1RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_11OptionalnonNegativeIntegerpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__3__6545__With_no_density_determined

data__6179__US_Units__6180__3__6545__With_no_density_determined
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_2RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_2OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_12OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__4__6545__With_no_density_determined

data__6179__US_Units__6180__4__6545__With_no_density_determined
Total of 28 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_3RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 4comp_strength_1_ASTMC39_9RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 4max_load_4_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_3OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 4cylinder_length_4_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 4density_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_13OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 4density_cylinder_4_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 4vol_submerged_ASTMC39_7Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__5__6545__With_no_density_determined

data__6179__US_Units__6180__5__6545__With_no_density_determined
Total of 34 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_4RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 4comp_strength_1_ASTMC39_9RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 5comp_strength_1_ASTMC39_11RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 4max_load_4_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 5max_load_5_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_4OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 4cylinder_length_4_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 4density_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 5cylinder_length_5_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 5density_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_14OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 4density_cylinder_4_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 5density_cylinder_5_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 4vol_submerged_ASTMC39_7Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 5vol_submerged_ASTMC39_9Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__6__6545__With_no_density_determined

data__6179__US_Units__6180__6__6545__With_no_density_determined
Total of 40 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 6cylinder_cs_area_6_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_5RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 4comp_strength_1_ASTMC39_9RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 5comp_strength_1_ASTMC39_11RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 6cylinder_avg_dia_6_t6107_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 6comp_strength_6_t6256_ASTMC39RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 4max_load_4_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 5max_load_5_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 6max_load_6_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 6fracture_type_6_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 6correction_factor_ASTMC39_6Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_5OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 6mass_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 4cylinder_length_4_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 4density_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 5cylinder_length_5_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 5density_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 6cylinder_length_6_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 6density_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 6cylinder_avg_dia_6_t6107_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_15OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 6mass_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 6mass_submerged_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 4density_cylinder_4_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 5density_cylinder_5_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 6density_cylinder_6_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 4vol_submerged_ASTMC39_7Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 5vol_submerged_ASTMC39_9Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 6vol_submerged_ASTMC39_11Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Element by Element

Jump to Treeview | Jump to Tag Definitions
Root Element: <Concrete_dimexml>

The root element for an existing sample in Concrete DIMEXML format is Concrete_dimexml, and it requires two child elements, existing_sample and tests.

<Concrete_dimexml>
  <existing_sample></existing_sample>*<!-- complex element. See Child Element: <existing_sample> below. -->
  <tests></tests>*<!-- complex element.  See Child Element: <tests> below. -->
</Concrete_dimexml>*
Child Element: <existing_sample> Jump to Tag Definitions

existing_sample requires three fields, sample_project_id, sample_taken_date, sample_unique_key

<existing_sample>
  <sample_project_id></sample_project_id>*<!-- DIME Project ID, look it up using the DIME Project ID Lookup page at https://dime.dot.ca.gov/index.php?r=project/projectIDLookup. -->
  <sample_taken_date></sample_taken_date>*<!-- sample taken date, must be in date format: yyyy-mm-dd -->
  <sample_unique_key></sample_unique_key>*<!-- sample unique key, must be a minimum of 8 numerical characters, ie. 0-9 -->
</existing_sample>*
Child Element: <tests>

tests element may contain any number of test results from any combinations of test methods made for this sample. However, in this page, only the ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens test result element is described, and <astm_c_39_v_10> is the tag elment for indicating that the test result is for ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.

<tests>
  <astm_c_39_v_10>
    <test_meta_data></test_meta_data>*<!-- complex element, see blow-->
    <test_results></test_results>*<!-- complex element, see below -->
  <astm_c_39_v_10>
</tests>
Child Element: <test_meta_data> Jump to Tag Definitions

<test_meta_data> requires name_tester and date_tested, and allows for the following optional fields, result_compliance_status, result_compliance_status_comments, test_comments.

<test_meta_data>
  <name_tester></name_tester>*<!-- Tester's full name -->
  <date_tested></date_tested>*<!-- Date of test -->
  <test_comments></test_comments><!-- General comments (publicly viewable) (Max 250 characters) -->
  <result_compliance_status></result_compliance_status><!-- Test result compliance -->
  <result_compliance_status_comments></result_compliance_status_comments><!-- Project test result compliance comments (Max 250 characters) -->
</test_meta_data>
Child Element: <test_results>

This test method requires users to answer the following question(s) before the required/optional field(s) are determined.

  • (Tag ID: 6179) - Unit system used?. Possible answers: I Units,US Units
  • (Tag ID: 6180) - Number of specimens. Possible answers: ,2,3,4,5,6
  • (Tag ID: 6545) - Test performed. Possible answers: ith no density determined,With density determined by dimension measurements,With density determined from submerged weighing
Combining each answer from the questions above, this test method allows for the following variations. However, the DIMEXML schema requires the DIMEXML files to have one and only one of the variations for test results.

<test_results>
  <data__6179__SI_Units__6180__1__6545__With_no_density_determined></data__6179__SI_Units__6180__1__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__2__6545__With_no_density_determined></data__6179__SI_Units__6180__2__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__3__6545__With_no_density_determined></data__6179__SI_Units__6180__3__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__4__6545__With_no_density_determined></data__6179__SI_Units__6180__4__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__5__6545__With_no_density_determined></data__6179__SI_Units__6180__5__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__6__6545__With_no_density_determined></data__6179__SI_Units__6180__6__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements></data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing></data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__1__6545__With_no_density_determined></data__6179__US_Units__6180__1__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__2__6545__With_no_density_determined></data__6179__US_Units__6180__2__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__3__6545__With_no_density_determined></data__6179__US_Units__6180__3__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__4__6545__With_no_density_determined></data__6179__US_Units__6180__4__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__5__6545__With_no_density_determined></data__6179__US_Units__6180__5__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__6__6545__With_no_density_determined></data__6179__US_Units__6180__6__6545__With_no_density_determined>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements></data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>*<!-- complex test method variation element, see below -->
  <data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing></data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>*<!-- complex test method variation element, see below -->
</test_results>
Child Element: <data__6179__SI_Units__6180__1__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 1
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__1__6545__With_no_density_determined>
  <cylinder_cs_area_ASTMC39_1></cylinder_cs_area_ASTMC39_1>*<!-- Cross sectional area of cylinder 1 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_11></comp_strength_ASTMC39_11>*<!-- Compressive strength of cylinder (to nearest 0.1MPa) -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__1__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
  <density_cylinder_ASTMC39_1></density_cylinder_ASTMC39_1><!-- Density of cylinder -->
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__2__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 2
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__2__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_6></comp_strength_ASTMC39_6>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__2__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_6></cylinder_avg_density_ASTMC39_6><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
  <cylinder_avg_density_ASTMC39_16></cylinder_avg_density_ASTMC39_16><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__3__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 3
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__3__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_7></comp_strength_ASTMC39_7>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__3__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_7></cylinder_avg_density_ASTMC39_7><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_17></cylinder_avg_density_ASTMC39_17><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__4__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 4
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__4__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_2></cylinder_cs_area_4_ASTMC39_2>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_ASTMC39_8></comp_strength_ASTMC39_8>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_10></comp_strength_1_ASTMC39_10>*<!-- Compressive strength of cylinder 4 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_2></max_load_4_ASTMC39_2>*<!-- Maximum load on cylinder 4 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__4__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_8></cylinder_avg_density_ASTMC39_8><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_2></cylinder_length_4_ASTMC39_2><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_2></density_cylinder_4_ASTMC39_2><!-- Density of cylinder 4 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_18></cylinder_avg_density_ASTMC39_18><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_2></mass_submerged_cylinder_4_ASTMC39_2><!-- Apparent mass of submerged cylinder 4 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_4></density_cylinder_4_ASTMC39_4><!-- Density of cylinder 4 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <vol_submerged_ASTMC39_8></vol_submerged_ASTMC39_8><!-- Volume determined from submerged weighing, specimen 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__5__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 5
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__5__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_2></cylinder_cs_area_4_ASTMC39_2>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_2></cylinder_cs_area_5_ASTMC39_2>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <comp_strength_ASTMC39_9></comp_strength_ASTMC39_9>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_10></comp_strength_1_ASTMC39_10>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_12></comp_strength_1_ASTMC39_12>*<!-- Compressive strength of cylinder 5 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_2></max_load_4_ASTMC39_2>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_2></max_load_5_ASTMC39_2>*<!-- Maximum load on cylinder 5 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__5__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_9></cylinder_avg_density_ASTMC39_9><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_2></cylinder_length_4_ASTMC39_2><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_2></density_cylinder_4_ASTMC39_2><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_2></cylinder_length_5_ASTMC39_2><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_2></density_cylinder_5_ASTMC39_2><!-- Density of cylinder 5 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_19></cylinder_avg_density_ASTMC39_19><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_2></mass_submerged_cylinder_4_ASTMC39_2><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_2></mass_submerged_cylinder_5_ASTMC39_2><!-- Apparent mass of submerged cylinder 5 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_4></density_cylinder_4_ASTMC39_4><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_4></density_cylinder_5_ASTMC39_4><!-- Density of cylinder 5 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <vol_submerged_ASTMC39_8></vol_submerged_ASTMC39_8><!-- Volume determined from submerged weighing, specimen 4 -->
  <vol_submerged_ASTMC39_10></vol_submerged_ASTMC39_10><!-- Volume determined from submerged weighing, specimen 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__SI_Units__6180__6__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 6
  • Test performed: With_no_density_determined

<data__6179__SI_Units__6180__6__6545__With_no_density_determined>
  <cylinder_cs_area_1_ASTMC39></cylinder_cs_area_1_ASTMC39>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_t6224_ASTMC39></cylinder_cs_area_2_t6224_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_t6225_ASTMC39></cylinder_cs_area_3_t6225_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_2></cylinder_cs_area_4_ASTMC39_2>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_2></cylinder_cs_area_5_ASTMC39_2>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_cs_area_6_ASTMC39_2></cylinder_cs_area_6_ASTMC39_2>*<!-- Cross sectional area of cylinder 6 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_1_ASTMC39_3></comp_strength_1_ASTMC39_3>*<!-- Compressive strength of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_6></comp_strength_1_ASTMC39_6>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_8></comp_strength_1_ASTMC39_8>*<!-- Compressive strength of cylinder 3 -->
  <comp_strength_ASTMC39_10></comp_strength_ASTMC39_10>*<!-- Compressive strength (to nearest 0.1MPa) -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_10></comp_strength_1_ASTMC39_10>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_12></comp_strength_1_ASTMC39_12>*<!-- Compressive strength of cylinder 5 -->
  <cylinder_avg_dia_6_ASTMC39></cylinder_avg_dia_6_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <comp_strength_6_ASTMC39></comp_strength_6_ASTMC39>*<!-- Compressive strength of cylinder 6 -->
  <max_load_1_ASTMC39></max_load_1_ASTMC39>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_2></max_load_2_ASTMC39_2>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_2></max_load_3_ASTMC39_2>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_2></max_load_4_ASTMC39_2>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_2></max_load_5_ASTMC39_2>*<!-- Maximum load on cylinder 5 -->
  <max_load_6_ASTMC39_2></max_load_6_ASTMC39_2>*<!-- Maximum load on cylinder 6 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <fracture_type_6_ASTMC39></fracture_type_6_ASTMC39>*<!-- Type of fracture pattern of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <correction_factor_ASTMC39_6></correction_factor_ASTMC39_6>*<!-- Correction factor for cylinder 6 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__SI_Units__6180__6__6545__With_no_density_determined>
Child Element: <data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <cylinder_avg_density_ASTMC39_10></cylinder_avg_density_ASTMC39_10><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_6_ASTMC39_2></mass_cylinder_6_ASTMC39_2><!-- In air mass of cylinder 6 -->
  <cylinder_length_1_ASTMC39></cylinder_length_1_ASTMC39><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_2></density_cylinder_1_ASTMC39_2><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_2></cylinder_length_2_ASTMC39_2><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_2></density_cylinder_2_ASTMC39_2><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_2></cylinder_length_3_ASTMC39_2><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_2></density_cylinder_3_ASTMC39_2><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_2></cylinder_length_4_ASTMC39_2><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_2></density_cylinder_4_ASTMC39_2><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_2></cylinder_length_5_ASTMC39_2><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_2></density_cylinder_5_ASTMC39_2><!-- Density of cylinder 5 -->
  <cylinder_length_6_ASTMC39_2></cylinder_length_6_ASTMC39_2><!-- Length of cylinder 6 -->
  <density_cylinder_6_ASTMC39_2></density_cylinder_6_ASTMC39_2><!-- Density of cylinder 6 -->
  <cylinder_avg_dia_1_ASTMC39></cylinder_avg_dia_1_ASTMC39>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_2></cylinder_avg_dia_2_ASTMC39_2>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_ASTMC39></cylinder_avg_dia_3_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_ASTMC39></cylinder_avg_dia_4_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_ASTMC39></cylinder_avg_dia_5_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_avg_dia_6_ASTMC39></cylinder_avg_dia_6_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: SI_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_2></mass_cylinder_1_ASTMC39_2><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_2></mass_cylinder_2_ASTMC39_2><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_2></mass_cylinder_3_ASTMC39_2><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_2></mass_cylinder_4_ASTMC39_2><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_20></cylinder_avg_density_ASTMC39_20><!-- Average cylinder density (to nearest 10 kg per cubic meter) -->
  <mass_cylinder_5_ASTMC39_2></mass_cylinder_5_ASTMC39_2><!-- In air mass of cylinder 5 -->
  <mass_cylinder_6_ASTMC39_2></mass_cylinder_6_ASTMC39_2><!-- In air mass of cylinder 6 -->
  <mass_submerged_cylinder_1_ASTMC39_2></mass_submerged_cylinder_1_ASTMC39_2><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_2></mass_submerged_cylinder_2_ASTMC39_2><!-- Apparent mass of submerged cylinder 2 -->
  <mass_submerged_cylinder_3_ASTMC39_2></mass_submerged_cylinder_3_ASTMC39_2><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_2></mass_submerged_cylinder_4_ASTMC39_2><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_2></mass_submerged_cylinder_5_ASTMC39_2><!-- Apparent mass of submerged cylinder 5 -->
  <mass_submerged_cylinder_6_ASTMC39_2></mass_submerged_cylinder_6_ASTMC39_2><!-- Apparent mass of submerged cylinder 6 -->
  <density_cylinder_1_ASTMC39_4></density_cylinder_1_ASTMC39_4><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_4></density_cylinder_2_ASTMC39_4><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_4></density_cylinder_3_ASTMC39_4><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_4></density_cylinder_4_ASTMC39_4><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_4></density_cylinder_5_ASTMC39_4><!-- Density of cylinder 5 -->
  <density_cylinder_6_ASTMC39_4></density_cylinder_6_ASTMC39_4><!-- Density of cylinder 6 -->
  <vol_submerged_ASTMC39_2></vol_submerged_ASTMC39_2><!-- Volume determined from submerged weighing, specimen 1 -->
  <vol_submerged_ASTMC39_4></vol_submerged_ASTMC39_4><!-- Volume determined from submerged weighing, specimen 2 -->
  <vol_submerged_ASTMC39_6></vol_submerged_ASTMC39_6><!-- Volume determined from submerged weighing, specimen 3 -->
  <vol_submerged_ASTMC39_8></vol_submerged_ASTMC39_8><!-- Volume determined from submerged weighing, specimen 4 -->
  <vol_submerged_ASTMC39_10></vol_submerged_ASTMC39_10><!-- Volume determined from submerged weighing, specimen 5 -->
  <vol_submerged_ASTMC39_12></vol_submerged_ASTMC39_12><!-- Volume determined from submerged weighing, specimen 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__1__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 1
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__1__6545__With_no_density_determined>
  <cylinder_cs_area_ASTMC39_2></cylinder_cs_area_ASTMC39_2>*<!-- Cross sectional area of cylinder 1 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_12></comp_strength_ASTMC39_12>*<!-- Compressive strength of cylinder  (to nearest 10 psi) -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__1__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
  <density_cylinder_ASTMC39_2></density_cylinder_ASTMC39_2><!-- Density of cylinder -->
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 1
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
  <density_cylinder_ASTMC39_3></density_cylinder_ASTMC39_3><!-- Density of cylinder -->
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__2__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 2
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__2__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_1></comp_strength_ASTMC39_1>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__2__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_1></cylinder_avg_density_ASTMC39_1><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 2
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
  <cylinder_avg_density_ASTMC39_11></cylinder_avg_density_ASTMC39_11><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__3__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 3
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__3__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <comp_strength_ASTMC39_2></comp_strength_ASTMC39_2>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__3__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_2></cylinder_avg_density_ASTMC39_2><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 3
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <cylinder_avg_density_ASTMC39_12></cylinder_avg_density_ASTMC39_12><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__4__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 4
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__4__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_1></cylinder_cs_area_4_ASTMC39_1>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <comp_strength_ASTMC39_3></comp_strength_ASTMC39_3>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_9></comp_strength_1_ASTMC39_9>*<!-- Compressive strength of cylinder 4 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_1></max_load_4_ASTMC39_1>*<!-- Maximum load on cylinder 4 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__4__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_3></cylinder_avg_density_ASTMC39_3><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_1></cylinder_length_4_ASTMC39_1><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_1></density_cylinder_4_ASTMC39_1><!-- Density of cylinder 4 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 4
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <cylinder_avg_density_ASTMC39_13></cylinder_avg_density_ASTMC39_13><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_1></mass_submerged_cylinder_4_ASTMC39_1><!-- Apparent mass of submerged cylinder 4 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_3></density_cylinder_4_ASTMC39_3><!-- Density of cylinder 4 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <vol_submerged_ASTMC39_7></vol_submerged_ASTMC39_7><!-- Volume determined from submerged weighing, cylinder 4 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__5__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 5
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__5__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_1></cylinder_cs_area_4_ASTMC39_1>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_1></cylinder_cs_area_5_ASTMC39_1>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_ASTMC39_4></comp_strength_ASTMC39_4>*<!-- Compressive strength (to nearest 10 psi) -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_9></comp_strength_1_ASTMC39_9>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_11></comp_strength_1_ASTMC39_11>*<!-- Compressive strength of cylinder 5 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_1></max_load_4_ASTMC39_1>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_1></max_load_5_ASTMC39_1>*<!-- Maximum load on cylinder 5 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__5__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_4></cylinder_avg_density_ASTMC39_4><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_1></cylinder_length_4_ASTMC39_1><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_1></density_cylinder_4_ASTMC39_1><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_1></cylinder_length_5_ASTMC39_1><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_1></density_cylinder_5_ASTMC39_1><!-- Density of cylinder 5 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 5
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <cylinder_avg_density_ASTMC39_14></cylinder_avg_density_ASTMC39_14><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_1></mass_submerged_cylinder_4_ASTMC39_1><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_1></mass_submerged_cylinder_5_ASTMC39_1><!-- Apparent mass of submerged cylinder 5 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_3></density_cylinder_4_ASTMC39_3><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_3></density_cylinder_5_ASTMC39_3><!-- Density of cylinder 5 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <vol_submerged_ASTMC39_7></vol_submerged_ASTMC39_7><!-- Volume determined from submerged weighing, cylinder 4 -->
  <vol_submerged_ASTMC39_9></vol_submerged_ASTMC39_9><!-- Volume determined from submerged weighing, cylinder 5 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing>
Child Element: <data__6179__US_Units__6180__6__6545__With_no_density_determined>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 6
  • Test performed: With_no_density_determined

<data__6179__US_Units__6180__6__6545__With_no_density_determined>
  <cylinder_cs_area_1></cylinder_cs_area_1>*<!-- Cross sectional area of cylinder 1 -->
  <cylinder_cs_area_2_ASTMC39></cylinder_cs_area_2_ASTMC39>*<!-- Cross sectional area of cylinder 2 -->
  <cylinder_cs_area_3_ASTMC39></cylinder_cs_area_3_ASTMC39>*<!-- Cross sectional area of cylinder 3 -->
  <question_capped_accordance_with></question_capped_accordance_with>*<!-- Capped in accordance with? -->
  <cylinder_cs_area_4_ASTMC39_1></cylinder_cs_area_4_ASTMC39_1>*<!-- Cross sectional area of cylinder 4 -->
  <cylinder_cs_area_5_ASTMC39_1></cylinder_cs_area_5_ASTMC39_1>*<!-- Cross sectional area of cylinder 5 -->
  <cylinder_cs_area_6_ASTMC39_1></cylinder_cs_area_6_ASTMC39_1>*<!-- Cross sectional area of cylinder 6 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <comp_strength_1_ASTMC39_2></comp_strength_1_ASTMC39_2>*<!-- Compressive strength of cylinder 1 -->
  <comp_strength_1_ASTMC39_5></comp_strength_1_ASTMC39_5>*<!-- Compressive strength of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <comp_strength_1_ASTMC39_7></comp_strength_1_ASTMC39_7>*<!-- Compressive strength of cylinder 3 -->
  <comp_strength_ASTMC39_5></comp_strength_ASTMC39_5>*<!-- Compressive strength (to nearest 10 psi) -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <comp_strength_1_ASTMC39_9></comp_strength_1_ASTMC39_9>*<!-- Compressive strength of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <comp_strength_1_ASTMC39_11></comp_strength_1_ASTMC39_11>*<!-- Compressive strength of cylinder 5 -->
  <cylinder_avg_dia_6_t6107_ASTMC39></cylinder_avg_dia_6_t6107_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <comp_strength_6_t6256_ASTMC39></comp_strength_6_t6256_ASTMC39>*<!-- Compressive strength of cylinder 6 -->
  <max_load_1></max_load_1>*<!-- Maximum load on cylinder 1 -->
  <max_load_2_ASTMC39_1></max_load_2_ASTMC39_1>*<!-- Maximum load on cylinder 2 -->
  <max_load_3_ASTMC39_1></max_load_3_ASTMC39_1>*<!-- Maximum load on cylinder 3 -->
  <max_load_4_ASTMC39_1></max_load_4_ASTMC39_1>*<!-- Maximum load on cylinder 4 -->
  <max_load_5_ASTMC39_1></max_load_5_ASTMC39_1>*<!-- Maximum load on cylinder 5 -->
  <max_load_6_ASTMC39_1></max_load_6_ASTMC39_1>*<!-- Maximum load on cylinder 6 -->
  <fracture_type_1></fracture_type_1>*<!-- Type of fracture pattern of cylinder 1 -->
  <fracture_type_2_ASTMC39></fracture_type_2_ASTMC39>*<!-- Type of fracture pattern of cylinder 2 -->
  <fracture_type_3_ASTMC39></fracture_type_3_ASTMC39>*<!-- Type of fracture pattern of cylinder 3 -->
  <fracture_type_4_ASTMC39></fracture_type_4_ASTMC39>*<!-- Type of fracture pattern of cylinder 4 -->
  <fracture_type_5_ASTMC39></fracture_type_5_ASTMC39>*<!-- Type of fracture pattern of cylinder 5 -->
  <fracture_type_6_ASTMC39></fracture_type_6_ASTMC39>*<!-- Type of fracture pattern of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
  <correction_factor_ASTMC39></correction_factor_ASTMC39>*<!-- Correction factor for cylinder 1 -->
  <correction_factor_ASTMC39_2></correction_factor_ASTMC39_2>*<!-- Correction factor for cylinder 2 -->
  <correction_factor_ASTMC39_3></correction_factor_ASTMC39_3>*<!-- Correction factor for cylinder 3 -->
  <correction_factor_ASTMC39_4></correction_factor_ASTMC39_4>*<!-- Correction factor for cylinder 4 -->
  <correction_factor_ASTMC39_5></correction_factor_ASTMC39_5>*<!-- Correction factor for cylinder 5 -->
  <correction_factor_ASTMC39_6></correction_factor_ASTMC39_6>*<!-- Correction factor for cylinder 6 -->
  <cylinder_age_ASTMC39></cylinder_age_ASTMC39>*<!-- Age of specimen -->
</data__6179__US_Units__6180__6__6545__With_no_density_determined>
Child Element: <data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_by_dimension_measurements

<data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <cylinder_avg_density_ASTMC39_5></cylinder_avg_density_ASTMC39_5><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_6_ASTMC39_1></mass_cylinder_6_ASTMC39_1><!-- In air mass of cylinder 6 -->
  <cylinder_length_1></cylinder_length_1><!-- Length of cylinder 1 -->
  <density_cylinder_1_ASTMC39_1></density_cylinder_1_ASTMC39_1><!-- Density of cylinder 1 -->
  <cylinder_length_2_ASTMC39_1></cylinder_length_2_ASTMC39_1><!-- Length of cylinder 2 -->
  <density_cylinder_2_ASTMC39_1></density_cylinder_2_ASTMC39_1><!-- Density of cylinder 2 -->
  <cylinder_length_3_ASTMC39_1></cylinder_length_3_ASTMC39_1><!-- Length of cylinder 3 -->
  <density_cylinder_3_ASTMC39_1></density_cylinder_3_ASTMC39_1><!-- Density of cylinder 3 -->
  <cylinder_length_4_ASTMC39_1></cylinder_length_4_ASTMC39_1><!-- Length of cylinder 4 -->
  <density_cylinder_4_ASTMC39_1></density_cylinder_4_ASTMC39_1><!-- Density of cylinder 4 -->
  <cylinder_length_5_ASTMC39_1></cylinder_length_5_ASTMC39_1><!-- Length of cylinder 5 -->
  <density_cylinder_5_ASTMC39_1></density_cylinder_5_ASTMC39_1><!-- Density of cylinder 5 -->
  <cylinder_length_6_ASTMC39_1></cylinder_length_6_ASTMC39_1><!-- Length of cylinder 6 -->
  <density_cylinder_6_ASTMC39_1></density_cylinder_6_ASTMC39_1><!-- Density of cylinder 6 -->
  <cylinder_avg_dia_1></cylinder_avg_dia_1>*<!-- Average diameter of cylinder 1 -->
  <cylinder_avg_dia_2_ASTMC39_1></cylinder_avg_dia_2_ASTMC39_1>*<!-- Average diameter of cylinder 2 -->
  <cylinder_avg_dia_3_t6104_ASTMC39></cylinder_avg_dia_3_t6104_ASTMC39>*<!-- Average diameter of cylinder 3 -->
  <cylinder_avg_dia_4_t6105_ASTMC39></cylinder_avg_dia_4_t6105_ASTMC39>*<!-- Average diameter of cylinder 4 -->
  <cylinder_avg_dia_5_t6106_ASTMC39></cylinder_avg_dia_5_t6106_ASTMC39>*<!-- Average diameter of cylinder 5 -->
  <cylinder_avg_dia_6_t6107_ASTMC39></cylinder_avg_dia_6_t6107_ASTMC39>*<!-- Average diameter of cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements>
Child Element: <data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>

This element is used when the following answer(s) are provided:

  • Unit system used?: US_Units
  • Number of specimens: 6
  • Test performed: With_density_determined_from_submerged_weighing

<data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>
  <mass_cylinder_1_ASTMC39_1></mass_cylinder_1_ASTMC39_1><!-- In air mass of cylinder 1 -->
  <mass_cylinder_2_ASTMC39_1></mass_cylinder_2_ASTMC39_1><!-- In air mass of cylinder 2 -->
  <mass_cylinder_3_ASTMC39_1></mass_cylinder_3_ASTMC39_1><!-- In air mass of cylinder 3 -->
  <mass_cylinder_4_ASTMC39_1></mass_cylinder_4_ASTMC39_1><!-- In air mass of cylinder 4 -->
  <cylinder_avg_density_ASTMC39_15></cylinder_avg_density_ASTMC39_15><!-- Average cylinder density (to nearest 1 pcf) -->
  <mass_cylinder_5_ASTMC39_1></mass_cylinder_5_ASTMC39_1><!-- In air mass of cylinder 5 -->
  <mass_cylinder_6_ASTMC39_1></mass_cylinder_6_ASTMC39_1><!-- In air mass of cylinder 6 -->
  <mass_submerged_cylinder_1_ASTMC39_1></mass_submerged_cylinder_1_ASTMC39_1><!-- Apparent mass of submerged cylinder 1 -->
  <mass_submerged_cylinder_2_ASTMC39_1></mass_submerged_cylinder_2_ASTMC39_1><!-- Apparent mass of submerged cylinder 2 -->
  <density_cylinder_1_ASTMC39_3></density_cylinder_1_ASTMC39_3><!-- Density of cylinder 1 -->
  <mass_submerged_cylinder_3_ASTMC39_1></mass_submerged_cylinder_3_ASTMC39_1><!-- Apparent mass of submerged cylinder 3 -->
  <mass_submerged_cylinder_4_ASTMC39_1></mass_submerged_cylinder_4_ASTMC39_1><!-- Apparent mass of submerged cylinder 4 -->
  <mass_submerged_cylinder_5_ASTMC39_1></mass_submerged_cylinder_5_ASTMC39_1><!-- Apparent mass of submerged cylinder 5 -->
  <mass_submerged_cylinder_6_ASTMC39_1></mass_submerged_cylinder_6_ASTMC39_1><!-- Apparent mass of submerged cylinder 6 -->
  <density_cylinder_2_ASTMC39_3></density_cylinder_2_ASTMC39_3><!-- Density of cylinder 2 -->
  <density_cylinder_3_ASTMC39_3></density_cylinder_3_ASTMC39_3><!-- Density of cylinder 3 -->
  <density_cylinder_4_ASTMC39_3></density_cylinder_4_ASTMC39_3><!-- Density of cylinder 4 -->
  <density_cylinder_5_ASTMC39_3></density_cylinder_5_ASTMC39_3><!-- Density of cylinder 5 -->
  <density_cylinder_6_ASTMC39_3></density_cylinder_6_ASTMC39_3><!-- Density of cylinder 6 -->
  <vol_submerged_ASTMC39_1></vol_submerged_ASTMC39_1><!-- Volume determined from submerged weighing, cylinder 1 -->
  <vol_submerged_ASTMC39_3></vol_submerged_ASTMC39_3><!-- Volume determined from submerged weighing, cylinder 2 -->
  <vol_submerged_ASTMC39_5></vol_submerged_ASTMC39_5><!-- Volume determined from submerged weighing, cylinder 3 -->
  <vol_submerged_ASTMC39_7></vol_submerged_ASTMC39_7><!-- Volume determined from submerged weighing, cylinder 4 -->
  <vol_submerged_ASTMC39_9></vol_submerged_ASTMC39_9><!-- Volume determined from submerged weighing, cylinder 5 -->
  <vol_submerged_ASTMC39_11></vol_submerged_ASTMC39_11><!-- Volume determined from submerged weighing, cylinder 6 -->
  <cylinder_defect></cylinder_defect><!-- Comment on any defect in either specimen or caps (Max 250 Characters) -->
</data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing>

DIMEXML Structure Treeviews

Jump to Element by Element | Jump to Tag Definitions
- Click the icons to collapse the DIMEXML sample structure tree.
- * indicates required fields
- indiciates tags can be referred to the corresponding tables for detailed requirements.
  • Concrete_dimexml
    • existing_sample*Jump to Tag Definitions
      • sample_project_id*
      • sample_taken_date*
      • sample_unique_key*
    • tests*
      • astm_c_39_v_10*
        • test_meta_data*Jump to Tag Definitions
          • name_tester*
          • date_tested*
          • result_compliance_status
          • result_compliance_status_comments
          • test_comments
        • test_results * (Requires Tags from One of Test Method Variations Below) Jump to Tag Definitions
          • data__6179__SI_Units__6180__1__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__2__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__3__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__4__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__5__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__6__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__1__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__2__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__3__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__4__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__5__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__6__6545__With_no_density_determined (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements (DIMEXML template for this variation available soon)
          • data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing (DIMEXML template for this variation available soon)

Tag Definitions

Jump to Element by Element | Jump to Treeview
existing_sample
Total of 3 tags
LabelTagRequired?Base TypeValue RestrictionUnit Required?Unit Restriction
DIME Project IDsample_project_idRequiredstringpattern:\d{1,25}NoN/A
Date the sample is takensample_taken_dateRequireddate NoN/A
Sample unique sequential digitssample_unique_keyRequiredstringpattern:\d{8,16}NoN/A
test_meta_data
Total of 6 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Test identification numbersample_id_numberOptionalstringpattern:\d{1,8}NoN/A
Tester's full namename_testerRequiredstringpattern:[\w\s\\/,.-]{1,100}NoN/A
Date of testdate_testedRequireddate NoN/A
General comments (publicly viewable) (Max 250 characters)test_commentsOptionalstringpattern:[=!@#&amp;$%*()-,.\w\s\d\-:;\\/]{0,250}NoN/A
Test result complianceresult_compliance_statusOptionalstringenumeration: ,complies,does not comply,not applicableNoN/A
Project test result compliance comments (Max 250 characters)result_compliance_status_commentsOptionalstringpattern:[=!@#&amp;$%*()-,.\w\s\d\-:]{0,250}NoN/A
Test Method Variation Tables

Variation(combo tag): data__6179__SI_Units__6180__1__6545__With_no_density_determined

data__6179__SI_Units__6180__1__6545__With_no_density_determined
Total of 9 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength of cylinder (to nearest 0.1MPa)comp_strength_ASTMC39_11Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__1__6545__With_density_determined_by_dimension_measurements
Total of 4 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__1__6545__With_density_determined_from_submerged_weighing
Total of 5 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Density of cylinderdensity_cylinder_ASTMC39_1OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__2__6545__With_no_density_determined

data__6179__SI_Units__6180__2__6545__With_no_density_determined
Total of 16 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_6Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__2__6545__With_density_determined_by_dimension_measurements
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_6OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__2__6545__With_density_determined_from_submerged_weighing
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_16OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__3__6545__With_no_density_determined

data__6179__SI_Units__6180__3__6545__With_no_density_determined
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_7Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__3__6545__With_density_determined_by_dimension_measurements
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_7OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__3__6545__With_density_determined_from_submerged_weighing
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_17OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__4__6545__With_no_density_determined

data__6179__SI_Units__6180__4__6545__With_no_density_determined
Total of 28 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_8Requireddecimalpattern:\d*\.\d{1}YesMPa
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 4comp_strength_1_ASTMC39_10RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 4max_load_4_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__4__6545__With_density_determined_by_dimension_measurements
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_8OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 4cylinder_length_4_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 4density_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__4__6545__With_density_determined_from_submerged_weighing
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_18OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 4density_cylinder_4_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 4vol_submerged_ASTMC39_8Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__5__6545__With_no_density_determined

data__6179__SI_Units__6180__5__6545__With_no_density_determined
Total of 34 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_9Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 4comp_strength_1_ASTMC39_10RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 5comp_strength_1_ASTMC39_12RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 4max_load_4_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 5max_load_5_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__5__6545__With_density_determined_by_dimension_measurements
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_9OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 4cylinder_length_4_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 4density_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 5cylinder_length_5_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 5density_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__5__6545__With_density_determined_from_submerged_weighing
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_19OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 4density_cylinder_4_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 5density_cylinder_5_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 4vol_submerged_ASTMC39_8Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 5vol_submerged_ASTMC39_10Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__6__6545__With_no_density_determined

data__6179__SI_Units__6180__6__6545__With_no_density_determined
Total of 40 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 2cylinder_cs_area_2_t6224_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 3cylinder_cs_area_3_t6225_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Cross sectional area of cylinder 6cylinder_cs_area_6_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesmm^2
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 1comp_strength_1_ASTMC39_3RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 2comp_strength_1_ASTMC39_6RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 3comp_strength_1_ASTMC39_8RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Compressive strength (to nearest 0.1MPa)comp_strength_ASTMC39_10Requireddecimalpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 4comp_strength_1_ASTMC39_10RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 5comp_strength_1_ASTMC39_12RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Average diameter of cylinder 6cylinder_avg_dia_6_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Compressive strength of cylinder 6comp_strength_6_ASTMC39RequirednonNegativeIntegerpattern:\d*\.\d{1}YesMPa
Maximum load on cylinder 1max_load_1_ASTMC39RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 2max_load_2_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 3max_load_3_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 4max_load_4_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 5max_load_5_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Maximum load on cylinder 6max_load_6_ASTMC39_2RequirednonNegativeIntegerpattern:\d+YesN
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 6fracture_type_6_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 6correction_factor_ASTMC39_6Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements

data__6179__SI_Units__6180__6__6545__With_density_determined_by_dimension_measurements
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_10OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 6mass_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Length of cylinder 1cylinder_length_1_ASTMC39Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 1density_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 2cylinder_length_2_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 2density_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 3cylinder_length_3_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 3density_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 4cylinder_length_4_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 4density_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 5cylinder_length_5_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 5density_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Length of cylinder 6cylinder_length_6_ASTMC39_2Optionaldecimalpattern:(\d*\.\d{2})?Yesmm
Density of cylinder 6density_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Average diameter of cylinder 1cylinder_avg_dia_1_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_2Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 3cylinder_avg_dia_3_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 4cylinder_avg_dia_4_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 5cylinder_avg_dia_5_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Average diameter of cylinder 6cylinder_avg_dia_6_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesmm
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing

data__6179__SI_Units__6180__6__6545__With_density_determined_from_submerged_weighing
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 2mass_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 3mass_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 4mass_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Average cylinder density (to nearest 10 kg per cubic meter)cylinder_avg_density_ASTMC39_20OptionalnonNegativeIntegerpattern:\d+[0]Yeskg/m^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
In air mass of cylinder 6mass_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Apparent mass of submerged cylinder 6mass_submerged_cylinder_6_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg
Density of cylinder 1density_cylinder_1_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 2density_cylinder_2_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 3density_cylinder_3_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 4density_cylinder_4_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 5density_cylinder_5_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Density of cylinder 6density_cylinder_6_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeskg/m^3
Volume determined from submerged weighing, specimen 1vol_submerged_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 2vol_submerged_ASTMC39_4Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 3vol_submerged_ASTMC39_6Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 4vol_submerged_ASTMC39_8Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 5vol_submerged_ASTMC39_10Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Volume determined from submerged weighing, specimen 6vol_submerged_ASTMC39_12Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesm^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__1__6545__With_no_density_determined

data__6179__US_Units__6180__1__6545__With_no_density_determined
Total of 9 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_ASTMC39_2Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength of cylinder (to nearest 10 psi)comp_strength_ASTMC39_12RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__1__6545__With_density_determined_by_dimension_measurements
Total of 5 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Density of cylinderdensity_cylinder_ASTMC39_2Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__1__6545__With_density_determined_from_submerged_weighing
Total of 5 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Density of cylinderdensity_cylinder_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__2__6545__With_no_density_determined

data__6179__US_Units__6180__2__6545__With_no_density_determined
Total of 16 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_1RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__2__6545__With_density_determined_by_dimension_measurements
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__2__6545__With_density_determined_from_submerged_weighing
Total of 10 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_11OptionalnonNegativeIntegerpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__3__6545__With_no_density_determined

data__6179__US_Units__6180__3__6545__With_no_density_determined
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_2RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__3__6545__With_density_determined_by_dimension_measurements
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_2OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__3__6545__With_density_determined_from_submerged_weighing
Total of 14 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_12OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__4__6545__With_no_density_determined

data__6179__US_Units__6180__4__6545__With_no_density_determined
Total of 28 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_3RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 4comp_strength_1_ASTMC39_9RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 4max_load_4_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__4__6545__With_density_determined_by_dimension_measurements
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_3OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 4cylinder_length_4_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 4density_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__4__6545__With_density_determined_from_submerged_weighing
Total of 18 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_13OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 4density_cylinder_4_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 4vol_submerged_ASTMC39_7Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__5__6545__With_no_density_determined

data__6179__US_Units__6180__5__6545__With_no_density_determined
Total of 34 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_4RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 4comp_strength_1_ASTMC39_9RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 5comp_strength_1_ASTMC39_11RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 4max_load_4_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 5max_load_5_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__5__6545__With_density_determined_by_dimension_measurements
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_4OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 4cylinder_length_4_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 4density_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 5cylinder_length_5_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 5density_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__5__6545__With_density_determined_from_submerged_weighing
Total of 22 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_14OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 4density_cylinder_4_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 5density_cylinder_5_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 4vol_submerged_ASTMC39_7Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 5vol_submerged_ASTMC39_9Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__6__6545__With_no_density_determined

data__6179__US_Units__6180__6__6545__With_no_density_determined
Total of 40 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
Cross sectional area of cylinder 1cylinder_cs_area_1RequireddecimalfractionDigits:2Yesin^2
Cross sectional area of cylinder 2cylinder_cs_area_2_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 3cylinder_cs_area_3_ASTMC39Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Capped in accordance with?question_capped_accordance_withRequiredstringenumeration:,ASTM C617/CTM521,ASTM C1231NoN/A
Cross sectional area of cylinder 4cylinder_cs_area_4_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 5cylinder_cs_area_5_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Cross sectional area of cylinder 6cylinder_cs_area_6_ASTMC39_1Requireddecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesin^2
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 1comp_strength_1_ASTMC39_2RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength of cylinder 2comp_strength_1_ASTMC39_5RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 3comp_strength_1_ASTMC39_7RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Compressive strength (to nearest 10 psi)comp_strength_ASTMC39_5RequirednonNegativeIntegerpattern:\d*(0|5)Yespsi
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 4comp_strength_1_ASTMC39_9RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 5comp_strength_1_ASTMC39_11RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Average diameter of cylinder 6cylinder_avg_dia_6_t6107_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Compressive strength of cylinder 6comp_strength_6_t6256_ASTMC39RequirednonNegativeIntegerpattern:\d*\.\d{1}Yespsi
Maximum load on cylinder 1max_load_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 2max_load_2_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 3max_load_3_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 4max_load_4_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 5max_load_5_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Maximum load on cylinder 6max_load_6_ASTMC39_1RequirednonNegativeIntegerpattern:\d+Yeslb
Type of fracture pattern of cylinder 1fracture_type_1Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 2fracture_type_2_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 3fracture_type_3_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 4fracture_type_4_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 5fracture_type_5_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Type of fracture pattern of cylinder 6fracture_type_6_ASTMC39Requiredstringenumeration:,1,2,3,4,5,6NoN/A
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A
Correction factor for cylinder 1correction_factor_ASTMC39Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 2correction_factor_ASTMC39_2Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 3correction_factor_ASTMC39_3Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 4correction_factor_ASTMC39_4Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 5correction_factor_ASTMC39_5Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Correction factor for cylinder 6correction_factor_ASTMC39_6Requireddecimalpattern:(\d*\.\d{2})?NoN/A
Age of specimencylinder_age_ASTMC39RequirednonNegativeIntegerpattern:\d+Yesdays

Variation(combo tag): data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements

data__6179__US_Units__6180__6__6545__With_density_determined_by_dimension_measurements
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_5OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 6mass_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Length of cylinder 1cylinder_length_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 1density_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 2cylinder_length_2_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 2density_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 3cylinder_length_3_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 3density_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 4cylinder_length_4_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 4density_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 5cylinder_length_5_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 5density_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Length of cylinder 6cylinder_length_6_ASTMC39_1Optionaldecimalpattern:(\d*\.\d{2})?Yesin
Density of cylinder 6density_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Average diameter of cylinder 1cylinder_avg_dia_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 2cylinder_avg_dia_2_ASTMC39_1Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 3cylinder_avg_dia_3_t6104_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 4cylinder_avg_dia_4_t6105_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 5cylinder_avg_dia_5_t6106_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Average diameter of cylinder 6cylinder_avg_dia_6_t6107_ASTMC39Requireddecimalpattern:\d*\.\d{2}Yesin
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A

Variation(combo tag): data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing

data__6179__US_Units__6180__6__6545__With_density_determined_from_submerged_weighing
Total of 26 tags
LabelTagRequired?Base TypeValue RestrictionAttribute "units" Required?Allowed Units
In air mass of cylinder 1mass_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 2mass_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 3mass_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 4mass_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Average cylinder density (to nearest 1 pcf)cylinder_avg_density_ASTMC39_15OptionalnonNegativeIntegerpattern:(\d+)?Yeslb/ft^3
In air mass of cylinder 5mass_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
In air mass of cylinder 6mass_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 1mass_submerged_cylinder_1_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 2mass_submerged_cylinder_2_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 1density_cylinder_1_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Apparent mass of submerged cylinder 3mass_submerged_cylinder_3_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 4mass_submerged_cylinder_4_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 5mass_submerged_cylinder_5_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Apparent mass of submerged cylinder 6mass_submerged_cylinder_6_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb
Density of cylinder 2density_cylinder_2_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 3density_cylinder_3_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 4density_cylinder_4_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 5density_cylinder_5_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Density of cylinder 6density_cylinder_6_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)?Yeslb/ft^3
Volume determined from submerged weighing, cylinder 1vol_submerged_ASTMC39_1Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 2vol_submerged_ASTMC39_3Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 3vol_submerged_ASTMC39_5Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 4vol_submerged_ASTMC39_7Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 5vol_submerged_ASTMC39_9Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Volume determined from submerged weighing, cylinder 6vol_submerged_ASTMC39_11Optionaldecimalpattern:(\d+|\d+\.|\d*\.\d+)Yesft^3
Comment on any defect in either specimen or caps (Max 250 Characters)cylinder_defectOptionalstring NoN/A