Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Filter on Case Sensitive
Total 283 results.
| Org | Prefix | Number | Version | Name | Part | Material Type | Sample Card |
|---|---|---|---|---|---|---|---|
| ASTM | C | 39 | 10 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | Concrete Concrete Core | View | |
| ASTM | C | 138 | 10b | Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete | Concrete | View | |
| ASTM | C | 143 | 10a | Standard Test Method for Slump of Hydraulic-Cement Concrete | Concrete | View | |
| ASTM | C | 173 | 10b | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method | Concrete | View | |
| ASTM | C | 1064 | 08 | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete | Concrete | View | |
| ASTM | C | 151 | 15 | Standard Test Method for Autoclave Expansion of Hydraulic Cement | Cementitious | View | |
| ASTM | C | 188 | 15 | Standard Test Method for Density of Hydraulic Cement | Cementitious | View | |
| ASTM | C | 231 | 10 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method | Concrete | View | |
| ASTM | C | 430 | 8 | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve | Cementitious | View | |
| ASTM | C | 29 | 09 | Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate | Aggregate | View | |
| ASTM | C | 40 | 11 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete | Aggregate | View | |
| ASTM | C | 88 | 5 | Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate | Aggregate High Friction Surface Treatment | View | |
| ASTM | C | 127 | 12 | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate | Aggregate | View | |
| ASTM | C | 128 | 12 | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate | Aggregate | View | |
| ASTM | C | 131 | 1 | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine | Aggregate | View | |
| AASHTO | T | 96 | 02r10 | Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine | Los Angeles Rattler | Aggregate | View |
| ASTM | C | 136 | 06 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates | Aggregate | View | |
| ASTM | C | 1260 | 14 | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) | Aggregate Cementitious | View | |
| ASTM | C | 1293 | 08b-re15 | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction | Aggregate | View | |
| ASTM | D | 2419 | 09 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate | Aggregate Soil | View | |
| ASTM | D | 3744 | 3 | Standard Test Method for Aggregate Durability Index | Aggregate | View | |
| ASTM | D | 5821 | 1 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate | Aggregate | View | |
| AASHTO | T | 304 | 11 | Standard Method of Test for Uncompacted Void Content of Fine Aggregate | Fine of Crushed Particles | Aggregate | View |
| CTM | 202 | November 2011 | Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Aggregate Soil Reclaimed Asphalt Pavement High Friction Surface Treatment | View | ||
| CTM | 203 | February 2008 | Mechanical Analysis of Soils | Soil | View | ||
| CTM | 205 | December 2010 | Method of Test for Determining Percentage of Crushed Particles | Aggregate | View | ||
| CTM | 206 | October 2011 | Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Aggregate | View | ||
| CTM | 207 | March 2012 | Method of Test for Specific Gravity and Absorption of Fine Aggregate | Aggregate | View | ||
| CTM | 208 | September 2011 | Method of Test for Apparent Specific Gravity of Fine Aggregates | Aggregate Soil Crumb Rubber Modifier | View | ||
| CTM | 211 | May 2010 | Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Aggregate High Friction Surface Treatment | View | ||
| CTM | 213 | December 2012 | Method of Test for Organic Impurities in Concrete Sand | Aggregate | View | ||
| CTM | 214 | August 2010 | Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | Aggregate | View | ||
| CTM | 217 | June 2011 | Method of Test for Sand Equivalent | Aggregate Soil High Friction Surface Treatment | View | ||
| CTM | 229 | June 2011 | Method of Test for Durability Index | Aggregate | View | ||
| CTM | 234 | August 2010 | Method of Test for Uncompacted Void Content of Fine Aggregates | Aggregate | View | ||
| CTM | 301 | March 2000 | Method of Test for Determining the Resistance "R"; Value of Treated and Untreated Bases, Subbases, and Basement Soils by the Stabilometer | Aggregate Soil | View | ||
| CTM | 212 | May 2010 | Method of Test for Unit Weight of Aggregate | Aggregate | View | ||
| ASTM | C | 266 | 15 | Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles | Cementitious | View | |
| ASTM | C | 191 | 13 | Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle | Cementitious | View | |
| AASHTO | T | 84 | 14 | Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate | Fine Specific Gravity | Aggregate | View |
| AASHTO | T | 11 | 5 | Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing | Aggregate | View | |
| AASHTO | T | 85 | 13 | Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Coarse Specific Gravity | Aggregate | View |
| AASHTO | T | 21 | 5 | Standard Method of Test for Organic Impurities in Fine Aggregates for Concrete | Aggregate | View | |
| AASHTO | T | 176 | 08 | Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test | Sand Equivalent | Aggregate | View |
| AASHTO | T | 255 | 0 | Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying | Aggregate | View | |
| AASHTO | T | 210 | 15 | Standard Method of Test for Aggregate Durability Index | Durability Index | Aggregate | View |
| CTM | 504 | June 2010 | Method of Test for Determining Air Content of Freshly Mixed Concrete by the Pressure Method | Concrete | View | ||
| CTM | 521 | June 2012 | Method of Test for Compressive Strength of Molded Concrete Cylinders | Concrete | View | ||
| CTM | 543 | July 2001 | Method of Test for Determining Air Content of Freshly Mixed Concrete by the Volumetric Method | Concrete | View | ||
| CTM | 556 | June 2010 | Method of Test for Slump of Fresh Portland Cement Concrete | Concrete | View | ||
| ASTM | C | 204 | 11 | Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus | Cementitious | View | |
| ASTM | C | 185 | 15a | Standard Test Method for Air Content of Hydraulic Cement Mortar | Cementitious | View | |
| CTM | 527 | February 2014 | Method of Test for Expansion in Water and Contraction in Air of Portland Cement Mortar | Cementitious | View | ||
| CTM | 371 | January 2005 | Method of Test for Resistance of Compacted Bituminous Mixture to Moisture Induced Damage | Moisture Content | Hot Mix Asphalt | View | |
| ASTM | D | 2007 | 11 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method | Clay Gel Absorption | Asphalt Modifier | View |
| ASTM | D | 217 | 16 | Standard Test Methods for Cone Penetration of Lubricating Grease | Cone Penetration | Asphalt Rubber Binder | View |
| AASHTO | T | 315 | 12 | Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Dynamic Shear | Asphalt Binder | View |
| CTM | 235 | August 2010 | Method of Test for Percentage of Flat and Elongated Particles in Coarse Aggregate | Aggregate | View | ||
| CTM | 518 | June 2010 | Method of Test for Unit Weight of Fresh Concrete | Concrete | View | ||
| ASTM | C | 293 | 10 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading) | Concrete | View | |
| ASTM | C | 78 | 10 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) | Concrete | View | |
| CTM | 523 | July 2012 | Method of Test for Flexural Strength of Concrete | Concrete | View | ||
| CTM | 524 | March 2013 | Method of Test for Flexural Strength Of Rapid Strength Concrete | Concrete | View | ||
| CTM | 557 | July 2012 | Method of Test for Temperature of Freshly Mixed Portland Cement Concrete | Concrete | View | ||
| CTM | 541 | November 2010 | Method of Test for Flow of Grout Mixtures (Flow Cone Method) | Concrete | View | ||
| CTM | 533 | June 2010 | Method of Test for Ball Penetration in Fresh Portland Cement Concrete | Concrete | View | ||
| CTM | 522 | March 2000 | Method of Test for Chord Modulus of Elasticity of Concrete (Compressometer Method) | Concrete | View | ||
| CTM | 226 | July 2010 | Method of Test for Determination of Moisture Content of Soils and Aggregates by Oven Drying | Soil Aggregate High Friction Surface Treatment | View | ||
| CTM | 531 | September 1998 | Method of Test for Determining Length of Drilled Concrete Cores | Concrete | View | ||
| AASHTO | T | 148 | 7 | Measuring Length of Drilled Concrete Cores | Concrete | View | |
| ASTM | C | 174 | 13 | Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores | Concrete | View | |
| ASTM | D | 4829 | 11 | Standard Test Method for Expansion Index of Soils | Soil | View | |
| CTM | 204 | June 2010 | Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils | Plasticity Index | Soil Aggregate | View | |
| ASTM | E | 8 | 13a_DO_NOT_USE | Standard Test Methods for Tension Testing of Metallic Materials | View | ||
| ASTM | D | 2240 | 05re10 | Standard Test Method for Rubber Property - Durometer Hardness | SMTL TM1 - Elastomeric Bearing Pad SMTL TM2 - Type B Elastomeric Joint Seal High Friction Surface Treatment | View | |
| ASTM | D | 412 | 06a-re13 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension | SMTL TM1 - Elastomeric Bearing Pad SMTL TM2 - Type B Elastomeric Joint Seal | View | |
| ASTM | D | 624 | 00-re12 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers | SMTL TM1 - Elastomeric Bearing Pad | View | |
| SMTL | 06 | (Neoprene Verification) Bilstein Test | SMTL TM1 - Elastomeric Bearing Pad SMTL TM2 - Type B Elastomeric Joint Seal | View | |||
| CTM | 227 | December 2014 | Method of Test for Evaluating Cleanness of Coarse Aggregate | Cleanness | Aggregate | View | |
| CTM | 556 | March 2016 | Method of Test for Slump of Fresh Portland Cement Concrete | Concrete | View | ||
| CTM | 673 | July 2012 | Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals | SMTL TM2 - Type B Elastomeric Joint Seal | View | ||
| ASTM | D | 471 | 15a | Standard Test Method for Rubber Property - Effect of Liquids | SMTL TM2 - Type B Elastomeric Joint Seal | View | |
| ASTM | A | 416 | 15 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | SMTL TM4 - Prestressing Strand | View | |
| ASTM | A | 882 | 04a-re10 | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand (Withdrawn 2019) | SMTL TM4 - Prestressing Strand | View | |
| CTM | 670 | December 2013 | Method of Tests for Mechanical and Welded Reinforcing Steel Splices | Tensile Slip | SMTL TM5 - Couplers | View | |
| CTM | 670 | December 2013 | Method of Tests for Mechanical and Welded Reinforcing Steel Splices | Necking | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops | View | |
| CTM | 670 | December 2013 | Method of Tests for Mechanical and Welded Reinforcing Steel Splices | Slip | SMTL TM5 - Couplers | View | |
| CTM | 670 | December 2013 | Method of Tests for Mechanical and Welded Reinforcing Steel Splices | Cyclical | SMTL TM5 - Couplers SMTL TM5 - Headed Bars SMTL TM5 - Welded Hoops | View | |
| ASTM | A | 775 | 07b-re14 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar | View | |
| ASTM | A | 775 | 07b-re14 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops SMTL TM5 - Threaded Bar SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar SMTL TM8 - Welded Wire Mesh SMTL TM5 - Headed Bars | View | |
| ASTM | D | 4014 | 03re12 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges | SMTL TM1 - Elastomeric Bearing Pad | View | |
| ASTM | A | 416 | 12a | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | View | ||
| CTM | 670 | December 2013 | Method of Tests for Mechanical and Welded Reinforcing Steel Splices | Tensile | SMTL TM5 - Welded Hoops SMTL TM5 - Couplers | View | |
| ASTM | A | 722 | 15 | Standard Specification for High-Strength Steel Bars for Prestressed Concrete | Tensile | SMTL TM5 - Threaded Bar | View |
| ASTM | A | 416 | 15 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | Strand Diameter Check | SMTL TM4 - Prestressing Strand | View |
| ASTM | A | 970 | 15e1 | Standard Specification for Headed Steel Bars for Concrete Reinforcement | Tensile | SMTL TM5 - Headed Bars | View |
| ASTM | C | 1064 | 12 | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete | Concrete | View | |
| ASTM | C | 231 | 17a | Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method | Concrete | View | |
| ASTM | C | 143 | 15a | Standard Test Method for Slump of Hydraulic-Cement Concrete | Concrete | View | |
| ASTM | C | 173 | 16 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method | Concrete | View | |
| ASTM | C | 138 | 17a | Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete | Concrete | View | |
| ASTM | C | 117 | 13 | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing | Aggregate | View | |
| ASTM | C | 566 | 13 | Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying | Aggregate | View | |
| ASTM | C | 39 | 17a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | Concrete Concrete Core | View | |
| ASTM | A | 370 | 15 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | Tensile - Round Sample | SMTL TM6 - Ductile Iron Cast Samples SMTL TM6 - Steel Check Sample Plate SMTL TM3 - Fastener Assembly | View |
| SMTL | 16 | Steel Chemistry Analysis | SMTL TM6 - Steel Check Sample Plate | View | |||
| ASTM | E | 23 | 12c | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | Charpy Impact | SMTL TM6 - Steel Check Sample Plate | View |
| ASTM | E | 18 | 15 | Standard Test Methods for Rockwell Hardness of Metallic Materials | Hardness | SMTL TM6 - Steel Check Sample Plate SMTL TM3 - Fastener Assembly | View |
| ASTM | A | 370 | 15 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | Tensile - Flat Sample | SMTL TM6 - Ductile Iron Cast Samples SMTL TM6 - Steel Check Sample Plate | View |
| AASHTO | T | 209 | 12 | Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures | Maximum Specific Gravity | Aggregate Reclaimed Asphalt Pavement Hot Mix Asphalt | View |
| AASHTO | T | 27 | 14 | Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Sieve Analysis | Aggregate Antistrip Additive | View |
| ASTM | B | 499 | 14 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals | Coating | SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 14a | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Proof Load with Wedge | SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 14a | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Proof Load | SMTL TM3 - Fastener Assembly | View |
| SMTL | 15 | Dimensional Verification | SMTL TM3 - Fastener Assembly | View | |||
| ASTM | A | 370 | 15 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | Reduced Tensile | SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 14a | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Tensile, Yield and Elongation | SMTL TM3 - Fastener Assembly | View |
| SMTL | 16 | SMTL Test Environment | SMTL TM1 - Elastomeric Bearing Pad | View | |||
| ASME | B | 1.2 | 83r01 | (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Ring Gage | SMTL TM3 - Fastener Assembly | View |
| ASTM | A | 934 | 13 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | Epoxy-Coating | SMTL TM4 - Prestressing Strand SMTL TM5 - Threaded Bar SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar SMTL TM8 - Welded Wire Mesh SMTL TM5 - Couplers SMTL TM5 - Headed Bars SMTL TM5 - Welded Hoops | View |
| ASTM | A | 884 | 14 | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement | Epoxy Coating Thickness | SMTL TM8 - Welded Wire Mesh SMTL TM5 - Couplers SMTL TM5 - Headed Bars SMTL TM5 - Threaded Bar SMTL TM5 - Welded Hoops SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar | View |
| ASTM | A | 1064 | 15 | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete | Weld Shear | SMTL TM8 - Welded Wire Mesh | View |
| ASTM | A | 931 | 0810 | Standard Test Method for Tension Testing of Wire Ropes and Strand | Diameter Verification | SMTL TM10 - Wire Rope Choker | View |
| ASTM | A | 931 | 0810 | Standard Test Method for Tension Testing of Wire Ropes and Strand | Breaking Force | SMTL TM10 - Wire Rope Choker | View |
| ASTM | A | 123 | 15 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products | Coating Thickness | SMTL TM8 - Welded Wire Mesh | View |
| CTM | 417 | June 2014 | Method of Testing Soils and Waters for Sulfate Content | Concrete Soil | View | ||
| CTM | 216 | June 2011 | Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates | Soil | View | ||
| CTM | 422 | June 2014 | Method of Testing Soils and Waters for Chloride Content | Concrete | View | ||
| CTM | 550 | December 2013 | Method for Determining the Surface Abrasion Resistance of Concrete Specimens | Concrete | View | ||
| ASTM | D | 1475 | Nov13 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products | Polyester Methacrylate Paint | View | |
| ASTM | D | 2196 | Feb15 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer | Polyester High Friction Surface Treatment | View | |
| ASTM | D | 2369 | Jul10 | Standard Test Method for Volatile Content of Coatings | Polyester Methacrylate Paint High Friction Surface Treatment | View | |
| ASTM | A | 882 | 04a-re10 | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand (Withdrawn 2019) | Coating Adhesion | SMTL TM4 - Prestressing Strand | View |
| ASTM | D | 638 | Dec14 | Standard Test Method for Tensile Properties of Plastics | Polyester High Friction Surface Treatment | View | |
| ASTM | D | 3278 | Jan96 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus | Methacrylate | View | |
| ASTM | D | 323 | Jun15 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | Methacrylate | View | |
| SCAQMD | 309-91 | Feb93 | Determination of Static Volatile Emissions | Polyester | View | ||
| AASHTO | T | 336 | 15 | Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete | Concrete | View | |
| ASTM | E | 340 | 15 | Standard Practice for Macroetching Metals and Alloys | SMTL TM5 - Welded Hoops | View | |
| ASTM | D | 1557 | May12 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³)) | Soil | View | |
| CTM | 670 | December 2013 | Method of Tests for Mechanical and Welded Reinforcing Steel Splices | Cyclical/Fatique Tensile with Slip | SMTL TM5 - Couplers | View | |
| ASTM | A | 615 | 15 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | Tensile | SMTL TM5 - Threaded Bar | View |
| ASTM | C | 140 | 15a | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units | Concrete Concrete Masonry Unit | View | |
| ASTM | C | 42 | 13 | Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete | Concrete Concrete Core | View | |
| ASTM | D | 3828 | 12a | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester | Methacrylate | View | |
| ASTM | C | 311 | 13 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete | Strength Activity Index | View | |
| ASTM | F | 606 | 14 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Hex Cap Screws | SMTL TM3 - Fastener Assembly | View |
| CTM | TEMP | 1 | 16 | Test Method for Monitoring Precast Concrete Curing Temperature | Curing temperature | Concrete | View |
| ASTM | A | 934 | 13 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | Holiday Bend | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar | View |
| ASME | B | 1.2 | 83r01 | (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Pitch Diameter | SMTL TM3 - Fastener Assembly | View |
| ASTM | A | 884 | 13 | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement | Holiday | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar SMTL TM5 - Threaded Bar | View |
| ASME | B | 1.2 | 83r01 | (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Plug Gage | SMTL TM3 - Fastener Assembly | View |
| ASTM | C | 1038 | 14b | Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water | Cement Mortar Bars | Cementitious | View |
| CALTRANS | StdSpec | 10 | Section 75-1.03E(2)(b) Cable Yield Indicator | Cable Yield Indicator | Cable Yield Indicator | View | |
| AASHTO | T | 201 | 15 | Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) | Residue from RTFO | Asphalt Binder | View |
| AASHTO | T | 201 | 15 | Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) | Original | Asphalt Binder | View |
| AASHTO | T | 201 | 15 | Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) | Extender Oil | Asphalt Binder | View |
| ASTM | C | 187 | 16 | Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste | Water Normal Consistency | Cementitious | View |
| AASHTO | T | 269 | 14 | Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures | Air Void | Hot Mix Asphalt | View |
| AASHTO | T | 275 | 07r12 | Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens | Bulk Specific Gravity | Hot Mix Asphalt | View |
| ASTM | C | 451 | 13 | Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method) | Cementitious | View | |
| AASHTO | T | 329 | 13 | Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method | Moisture Content | Hot Mix Asphalt | View |
| AASHTO | T | 312 | 14 | Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor | Method of Compaction | Hot Mix Asphalt | View |
| AASHTO | T | 324 | 14 | Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures | Hamburg Wheel Track | Hot Mix Asphalt | View |
| CTM | 553 | 1 | Method for Testing Thermal Stability of Mortar Made with Hydraulic Cement | Cementitious | View | ||
| AASHTO | T | 283 | 14 | Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage | Moisture Content | Hot Mix Asphalt | View |
| AASHTO | T | 228 | 09r13 | Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials | Specific Gravity | Asphalt Binder | View |
| ASTM | D | 36 | 14ε1 | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) | Softening Point | Asphalt Rubber Binder Thermoplastic | View |
| ASTM | D | 92 | 12b | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester | Flash Point | Asphalt Modifier | View |
| ASTM | D | 7741 | 11ε1 | Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer | Viscosity | Asphalt Rubber Binder | View |
| ASTM | D | 2074 | 07r13 | Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method | Amine | Antistrip Additive | View |
| ASTM | D | 445 | 14 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) | Kinematic Viscosity | Asphalt Modifier Asphalt Binder | View |
| AASHTO | T | 308 | 10 | Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method | Asphalt Binder Content | Reclaimed Asphalt Pavement Hot Mix Asphalt | View |
| CTM | 342 | August 2012 | Method of Test for Surface Skid Resistance with the California Portable Skid Tester | Skid | Asphalt Binder Skid Test | View | |
| AASHTO | T | 335 | 09r13 | Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate | Percent of Crushed Particles | Aggregate | View |
| AASHTO | T | 104 | 99r16 | Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate | Soundness | Aggregate | View |
| ASTM | D | 4791 | 10 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) | Flat and Elongated Particles | Aggregate | View |
| CTM | 386 | 14 | Method of Test for Determining Foaming Characteristics of Hot Bitumen | WMA | Warm Mix Asphalt Technology | View | |
| ASTM | D | 297 | 15 | Standard Test Methods for Rubber Products - Chemical Analysis | Chemical Analysis | Crumb Rubber Modifier | View |
| ASTM | D | 5329 | 16 | Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements | Asphalt Pavement | Asphalt Rubber Binder | View |
| ASTM | D | 476 | 15 | Standard Classification for Dry Pigmentary Titanium Dioxide Products | Titanium Dioxide Content | Thermoplastic | View |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Tensile Bond Strength | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Yellow Color | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Color Stability | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | White Color | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Glass Bead Content | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Binder Content | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Specific Gravity | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Daylight Luminous | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Impact Resistance | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Viscosity | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Inert Filler | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Abrasion | Thermoplastic | View | |
| CTM | 423 | December 2013 | Method for Testing Thermoplastic Traffic Line Material | Hardness | Thermoplastic | View | |
| ASTM | D | 3718 | 85a-r15 | Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy | Chromium content | Thermoplastic Paint | View |
| AASHTO | T | 164 | 14 | Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) | Asphalt Binder Content | Reclaimed Asphalt Pavement | View |
| AASHTO | T | 100 | 15 | Standard Method of Test for Specific Gravity of Soils | Specific Gravity | Soil Aggregate | View |
| CTM | 556 | January 2018 | Method of Test for Slump of Fresh Portland Cement Concrete | Concrete | View | ||
| ASTM | D | 93 | 16 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester | Flash Point | Paint | View |
| ASTM | D | 711 | 15 | Method of Test for Daylight 45 Degree, 0 Degree Luminus Directional Reflectance of Paint Finishes (Withdrawn 1954) | Dry Time | Paint | View |
| ASTM | C | 469 | 14 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression | Static Modulus of Elasticity | Concrete Concrete Core | View |
| ASTM | C | 496 | 17 | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens | Split Tensile Strength | Concrete | View |
| ASTM | D | 7585 | 15 | Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments | Paint | View | |
| ASTM | D | 2486 | 17 | Standard Test Methods for Scrub Resistance of Wall Paints | Paint | View | |
| ASTM | D | 3335 | 14 | Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy | Lead content | Paint Thermoplastic | View |
| ASTM | D | 6628 | 16 | Standard Specification for Color of Pavement Marking Materials | Chromaticity | Paint | View |
| ASTM | D | 3723 | 11 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing | Pigment Content | Paint | View |
| CTM | 551 | August 2012 | Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures | Polyester | View | ||
| AASHTO | T | 240 | 17 | Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) | Asphalt Binder Asphaltic Emulsion | View | |
| AASHTO | T | 51 | 13 | Standard Method of Test for Ductility of Asphalt Materials | Asphalt Binder | Asphalt Binder | View |
| AASHTO | T | 316 | 17 | Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer | Asphalt Binder | View | |
| ASTM | A | 615 | 15 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | Galvanize | SMTL TM5 - Threaded Bar | View |
| ASTM | A | 772 | 15 | Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current | Galvanize | SMTL TM5 - Threaded Bar | View |
| ASTM | D | 522 | 17 | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings | Method B | Paint | View |
| ASTM | D | 869 | 15 | Standard Test Method for Evaluating Degree of Settling of Paint | Paint | View | |
| ASTM | D | 1210 | 14 | Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage | Paint | View | |
| ASTM | D | 562 | 14 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer | Method B | Paint | View |
| ASTM | E | 70 | 15 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode | Paint | View | |
| ASTM | D | 3168 | 16 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints | Paint | View | |
| ASTM | C | 1252 | 17 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) | Aggregate | View | |
| ASTM | D | 2216 | 10 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass | Aggregate | View | |
| ASTM | D | 2487 | 17 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) | Soil | View | |
| ASTM | D | 2995 | 14 | Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors | Asphalt Binder | View | |
| AASHTO | T | 305 | 14 | Standard Method of Test for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures | Hot Mix Asphalt | View | |
| ASTM | E | 415 | 17 | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry | SMTL TM6 - Steel Check Sample Plate | View | |
| CTM | 368 | November 2010 | Method of Test for Optimum Bitumen Content (OBC) for Open Graded Asphalt Concrete | Hot Mix Asphalt | View | ||
| ASTM | C | 109 | 16a | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Cementitious | View | |
| CTM | 330 | September 2017 | Method of Test for Residue by Evaporation of Emulsified Asphalt | Asphaltic Emulsion | View | ||
| CTM | 331 | September 2017 | Method of Test for Residue by Evaporation of Latex Modified Asphalt Emulsion | Asphalt Binder Asphaltic Emulsion | View | ||
| AASHTO | T | 59 | 16 | Standard Method of Test for Emulsified Asphalts | Residue and Oil Distillate (Sec. 6) | Asphaltic Emulsion | View |
| AASHTO | T | 59 | 16 | Standard Method of Test for Emulsified Asphalts | Particle Charge Cationic Emulsified (Sec. 8) | Asphaltic Emulsion | View |
| AASHTO | T | 59 | 16 | Standard Method of Test for Emulsified Asphalts | Viscosity (Saybolt Furol) (Sec. 9) | Asphaltic Emulsion | View |
| AASHTO | T | 59 | 16 | Standard Method of Test for Emulsified Asphalts | Demulsibility (Sec. 10) | Asphaltic Emulsion | View |
| AASHTO | T | 59 | 18 | Standard Method of Test for Emulsified Asphalts | Sieve Test (Sec. 13) | Asphaltic Emulsion | View |
| AASHTO | T | 49 | 15 | Standard Method of Test for Penetration of Bituminous Materials | Asphaltic Emulsion | View | |
| AASHTO | T | 301 | 13 | Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer | Asphalt Binder Asphaltic Emulsion | View | |
| CTM | 302 | April 2014 | Method of Test for Stripping | Hot Mix Asphalt | View | ||
| ASTM | D | 244 | 17 | Standard Test Methods and Practices for Emulsified Asphalts | Asphaltic Emulsion | View | |
| AASHTO | T | 53 | 18 | Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus) | Asphalt Binder Asphaltic Emulsion | View | |
| CTM | 332 | November 2017 | Method of Test for Recovery from Deformation of Latex Modified Asphaltic Emulsion Residue | Asphaltic Emulsion | View | ||
| ASTM | D | 5 | 13 | Standard Test Method for Penetration of Bituminous Materials | Asphalt Binder | View | |
| CTM | 308 | August 2010 | Method of Test for Determining Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt | Method B | Hot Mix Asphalt | View | |
| CTM | 389 | 19 | Method of Test for Sampling and Reheating Asphalt Rubber Binder Field Samples Prior to Viscosity Testing in Accordance to ASTM D 7741 | Hot Mix Asphalt | View | ||
| CTM | 375 | February 2012 | Determining the In-Place Density and Relative Compaction of Hot Mix Asphalt Pavement Using Nuclear Gages | Hot Mix Asphalt | View | ||
| AASHTO | T | 30 | 19 | Standard Method of Test for Mechanical Analysis of Extracted Aggregate | Mechanical Analysis | Reclaimed Asphalt Pavement Aggregate Hot Mix Asphalt | View |
| AASHTO | T | 327 | 12 | Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus | Aggregate | View | |
| AASHTO | T | 166 | Jan 16 | Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens | Method A | Hot Mix Asphalt | View |
| CTM | 231 | March 2013 | Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages | Soil Aggregate | View | ||
| AASHTO | T | 44 | 18 | Standard Method of Test for Solubility of Bituminous Materials | Asphaltic Emulsion Asphalt Binder | View | |
| AASHTO | T | 313 | 19 | Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | Asphalt Binder Asphaltic Emulsion | View | |
| AASHTO | T | 48 | 18 | Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup | Asphalt Binder Asphaltic Emulsion | View | |
| ASTM | D | 2628 | 91-re16 | Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements | SMTL TM2 - Type B Elastomeric Joint Seal | View | |
| AASHTO | T | 51 | 13 | Standard Method of Test for Ductility of Asphalt Materials | Asphaltic Emulsion | Asphaltic Emulsion | View |
| ASTM | D | 2007 | 19 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method | Clay Gel Absorption | Asphaltic Emulsion | View |
| ASTM | D | 3549 | 18 | Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens | Hot Mix Asphalt | View | |
| ASTM | E | 70 | 19 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode | Asphaltic Emulsion | View | |
| AASHTO | T | 59 | 16 | Standard Method of Test for Emulsified Asphalts | Cement Mixing (Sec. 12) | Asphaltic Emulsion | View |
| AASHTO | T | 59 | 16 | Standard Method of Test for Emulsified Asphalts | Emulsified Asphalt Residue Evap. (Sec. 7) | Asphaltic Emulsion | View |
| AASHTO | T | 59 | 16 | Standard Method of Test for Emulsified Asphalts | Storage Stability of Emulsified (Sec. 18) | Asphaltic Emulsion | View |
| AASHTO | R | 28 | 16 | Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel | PAV | Asphalt Binder | View |
| ASTM | D | 5546 | 9 | Standard Test for Solubility of Asphalt Binders in Toluene by Centrifuge | Toluene | Asphalt Binder | View |
| ASTM | D | 7553 | 15 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide | Solubility | Asphalt Binder | View |
| AASHTO | T | 201 | 19 | Kinematic Viscosity of Asphalt Binder | Viscosity | Asphaltic Emulsion | View |
| AASHTO | T | 202 | 19 | Viscosity of Asphalt by Vacuum Capillary Viscometer | Viscosity | Asphaltic Emulsion | View |
| CTM | 382 | October 2014 | Method Of Test For Determination Of Binder Content Of Hot Mix Asphalt By The Ignition Method | Ignition Method | Hot Mix Asphalt | View | |
| AASHTO | T | 315 | 16 | Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Dynamic Shear | Asphalt Binder | View |
| CTM | 643 | April 2020 | Method for Test for Laboratory Resistivity and pH for Soil and Water | Soil Aggregate Water | View | ||
| CTM | 223 | 12 | Method of Test for Surface Moisture in Concrete Aggregates by the Displacement Method | Field Method | Aggregate | View | |
| CTM | 224 | 12 | Method of Test for Bulk Specific Gravity (S.S.D.) of Coarse Aggregate by the Displacement Method | Field Method | Aggregate | View | |
| CTM | 225 | 12 | Method of Test for Bulk Specific Gravity (S.S.D.) of Fine Aggregate by the Displacement Method | Field Method | Aggregate | View | |
| AASHTO | T | 350 | 19 | Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Multiple Stress Creep Recovery | Asphalt Binder | View |
| ASTM | C | 1064 | 17 | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete | Concrete | View | |
| ASTM | C | 78 | 18 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) | Concrete | View | |
| ASTM | C | 39 | 18 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | Concrete Concrete Core | View | |
| CTM | 557 | June 2020 | Method of Test for Temperature of Freshly Mixed Hydraulic Cement Concrete | Concrete | View | ||
| CTM | 521 | June 2020 | Method of Test for Compressive Strength of Molded Concrete Cylinders | Concrete Concrete Core | View | ||
| CTM | 523 | May 2020 | Method of Test for Flexural Strength of Concrete | Concrete | View | ||
| CTM | 385 | November 2016 | Method of Test for Crumb Rubber Modifier | CRM | Crumb Rubber Modifier | View | |
| ASTM | C | 579 | 18 | Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes | High Friction Surface Treatment | View | |
| ASTM | C | 25 | 19 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime | Cementitious | View | |
| ASTM | D | 3042 | 17 | Standard Test Method for Insoluble Residue in Carbonate Aggregates | Aggregate | View | |
| ASTM | D | 570 | 18 | Standard Test Method for Water Absorption of Plastics | High Friction Surface Treatment | View | |
| ASTM | C | 1567 | 13 | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) | Cementitious | View |