DIME - Sample Record for DIME Sample ID 2023-05-09-7

DIME » All Projects » Project - DEA: 043G4884 » Sample 2023-05-09-7 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2023-05-09-7

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215649 DEA: 043G4884 EFIS: 0412000088
DIST-CO-RTE-PM	04-SM-92-R14.4/R18.8
Award Date	09/01/2022
Closeout Date	Not set
Work Description	CLEAN AND PAINT STEEL BRIDGE TOWERS, REPLACE HIGH STRENGTH BOLTS.
Location Description	SAN MATEO COUNTY IN FOSTER CITY FROM SAN MATEO-HAYWARD BRIDGE TO ALAMEDA COUNTY LINE
QA Service Level	1 (Verified on 03/29/2021)

Sample Information

Sample Taken Date	05/09/2023	Sample Unique Key	7
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/18/2023
Sample type	Quality Assurance	A brief description of the sample	1"x3-3/4" F3125 TC Bolts
The quantity of what the sample constitutes	885 bolts	From where was the sample collected	Job Site
First name of sampler or witnessed by	Dylan	Last name of sampler or witnessed by	LaRose
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Unytite, Inc.	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	10621220, 6215079303, 191425	Nut Mfg. Lot Number(s)	31482-6215079303
Washer Mfg. Lot Number(s)	D8443	Bolt Specification	F3125 Grade F1852 A325TC
Bolt Length(s)	3-3/4"	Nut Specification	A563 DH
Washer Specification	F436	Finish	Mech Galv
Diameter/Size	1"	Bolt Mfg. Lot Number	31428-10621220
Rocap Test Requirement(s)	none	Lubricant Requirements(s)	none

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2023-05-09-7-1	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	05/22/2023	<None>	Yes	06/13/2023	Nut Proof
2023-05-09-7-2	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	05/22/2023	<None>	Yes	06/13/2023	Nut Proof
2023-05-09-7-3	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	rmacias, CT HQ - Sacramento Structural Materials Testing Laboratory	05/22/2023	rmacias	Yes	06/13/2023	Wedge Tensile
2023-05-09-7-4	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	rmacias, CT HQ - Sacramento Structural Materials Testing Laboratory	05/22/2023	rmacias	Yes	06/13/2023	Wedge Tensile
2023-05-09-7-5	ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/23/2023	Andrew Auvinen	Yes	06/13/2023
2023-05-09-7-6	ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/23/2023	Andrew Auvinen	Yes	06/13/2023
2023-05-09-7-7	ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/23/2023	Andrew Auvinen	Yes	06/13/2023
2023-05-09-7-8	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/23/2023	Andrew Auvinen	Yes	06/13/2023
2023-05-09-7-9	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/23/2023	Andrew Auvinen	Yes	06/13/2023
2023-05-09-7-10	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/23/2023	Andrew Auvinen	Yes	06/13/2023

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-05-09-7-1 ASTM F606-21 (Verified)
DIME Test ID: 2023-05-09-7-2 ASTM F606-21 (Verified)
DIME Test ID: 2023-05-09-7-3 ASTM F606-21 (Verified)
DIME Test ID: 2023-05-09-7-4 ASTM F606-21 (Verified)
DIME Test ID: 2023-05-09-7-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-05-09-7-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-05-09-7-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-05-09-7-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-16 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-09-7-17 ASTM E18-20 (Verified)
DIME Test ID: 2023-05-09-7-18 ASTM E18-20 (Verified)
DIME Test ID: 2023-05-09-7-19 ASTM E18-20 (Verified)