DIME - Sample Record for DIME Sample ID 2023-02-15-13

DIME » All Projects » Project - DEA: 01436404 » Sample 2023-02-15-13 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Sacramento Field Office

DIME Sample ID 2023-02-15-13

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215620 DEA: 01436404 EFIS: 0100000193
DIST-CO-RTE-PM	01-DN-101-35.8/36.5
Award Date	07/11/2022
Closeout Date	Not set
Work Description	Dr. Fine Bridge Replacement
Location Description	DR. FINE BRIDGE REPLACEMENT FROM LAKE EARL DR TO S FRED D. HAIGHT DR ON HWY 101 ACROSS SMITH RIVER.
QA Service Level	1 (Verified on 03/26/2021)

Sample Information

Sample Taken Date	02/15/2023	Sample Unique Key	13
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/15/2023
Sample type	Acceptance	A brief description of the sample	F1554 Anchor Rods Nuts Washers
The quantity of what the sample constitutes	59 sets	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Jamie	Last name of sampler or witnessed by	Doe
Title of sampler	Associate Steel Inspector	Telephone number of sampler	9168384405
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	C&K Johnson Industries	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	S50-003-23	Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	C203900	Nut Mfg. Lot Number(s)	W000010328
Washer Mfg. Lot Number(s)	169941	Bolt Specification	ASTM F1554
Bolt Length(s)	18"	Nut Specification	ASTM A563
Washer Specification	ASTM F436	Finish	ASTM F2329 Hot Dip
Diameter/Size	1-1/4" x 18"	Bolt Mfg. Lot Number	C203900
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2023-02-15-13-1	ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	03/02/2023	spaine	Yes	03/06/2023
2023-02-15-13-2	ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	03/02/2023	spaine	Yes	03/06/2023
2023-02-15-13-3	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	03/02/2023	<None>	Yes	03/06/2023	A563 Nut Proof
2023-02-15-13-4	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	03/02/2023	<None>	Yes	03/06/2023	A563 Nut Proof
2023-02-15-13-5	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/03/2023	Andrew Auvinen	Yes	03/06/2023
2023-02-15-13-6	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/03/2023	Andrew Auvinen	Yes	03/06/2023
2023-02-15-13-7	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/03/2023	Andrew Auvinen	Yes	03/06/2023
2023-02-15-13-8	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/03/2023	Andrew Auvinen	Yes	03/06/2023
2023-02-15-13-9	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/03/2023	Andrew Auvinen	Yes	03/06/2023
2023-02-15-13-10	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/03/2023	Andrew Auvinen	Yes	03/06/2023

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-02-15-13-1 ASTM A370-20 (Verified)
DIME Test ID: 2023-02-15-13-2 ASTM A370-20 (Verified)
DIME Test ID: 2023-02-15-13-3 ASTM F606-21 (Verified)
DIME Test ID: 2023-02-15-13-4 ASTM F606-21 (Verified)
DIME Test ID: 2023-02-15-13-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-02-15-13-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-02-15-13-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-02-15-13-8 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-02-15-13-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-02-15-13-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-02-15-13-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-02-15-13-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-02-15-13-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-02-15-13-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-02-15-13-15 ASTM E18-20 (Verified)
DIME Test ID: 2023-02-15-13-16 ASTM E18-20 (Verified)