Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2022-07-14-83
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 993345 DEA: 022J4004 EFIS: 0221000074 |
---|---|
DIST-CO-RTE-PM | 02-LAS-395-56.5/R61.1 |
Award Date | 02/02/2022 |
Closeout Date | 11/23/2022 |
Work Description | COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HMA. |
Location Description | LASSEN COUNTY NEAR JANESVILLE FROM 0.1 MILE NORTH OF SUNNYSIDE ROAD TO 0.1 MILE NORTH OF ROUTE 36 |
QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
Sample Taken Date | 07/14/2022 | Sample Unique Key | 83 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/01/2022 |
Sample type | Acceptance | A brief description of the sample | 5 boxes of Lime Treated 1/2-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and virgin PG 58-34 M from Albina – Madras |
The quantity of what the sample constitutes | 750 tons | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | CGI | Last name of sampler or witnessed by | . |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | D79115 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction and Materials – Ward Lake Plant (Litchfield, CA) | Transportation Laboratory (TL) Number | 897862 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2022-07-14-83-1 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Colt Sweeny, CT D02 - Redding Northern Regional Laboratory | 08/02/2022 | Darrell Valasek | Yes | 08/04/2022 | ||
2022-07-14-83-2 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Darrell Valasek, CT D02 - Redding Northern Regional Laboratory | 08/03/2022 | Darrell Valasek | Yes | 08/04/2022 | ||
2022-07-14-83-3 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Darrell Valasek, CT D02 - Redding Northern Regional Laboratory | 08/03/2022 | Darrell Valasek | Yes | 08/04/2022 | ||
2022-07-14-83-4 | AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction) | Darrell Valasek, CT D02 - Redding Northern Regional Laboratory | 08/02/2022 | Darrell Valasek | No | Percent Binder Content given is the target, actual binder content not determined on this sample. | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2022-07-14-83-1 AASHTO T209-12 (Verified)
DIME Test ID: 2022-07-14-83-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-07-14-83-3 AASHTO T269-14 (Verified)
DIME Test ID: 2022-07-14-83-4 AASHTO T312-14