Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2015-03-02-2
Project Information
Project Identifiers | Project ID: 7428 DEA: 07215944 EFIS: 0700001834 |
---|---|
DIST-CO-RTE-PM | 07-LA-5-4.0/5.9 |
Award Date | 08/23/2012 |
Closeout Date | 07/02/2021 |
Work Description | RECONSTRUCT AND WIDEN FREEWAY AND UNDERCROSSING STRUCTURES. |
Location Description | LOS ANGELES COUNTY IN NORWALK FROM 0.4 MILE SOUTH OF SAN ANTONIO DRIVE UNDERCROSSING TO 0.7 MILE NORTH OF PIONEER BOULEVARD UNDERCROSSING |
QA Service Level | 1 (Verified on 11/07/2012) |
Sample Information
Sample Taken Date | 03/02/2015 | Sample Unique Key | 2 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/05/2015 |
Sample type | Annual Source Testing | A brief description of the sample | Three quarters of an inch as one inch by number four PCC Aggregates |
The quantity of what the sample constitutes | 8 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Jeff | Last name of sampler or witnessed by | Pollard |
Title of sampler | Q C Supervisor | Telephone number of sampler | Unknown |
Laboratory sample identification | 5029B | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Vulcan San Bernardino | Transportation Laboratory (TL) Number | C15 43 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91 36 0012 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles at the Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2015-03-02-2-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Martin Ruiz, CT D08 - Fontana Southern Regional Laboratory | 03/06/2015 | Martin Ruiz | No | Info | ||
2015-03-02-2-2 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 03/10/2015 | Nader Rashidi | No | Info | ||
2015-03-02-2-3 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 03/10/2015 | Nader Rashidi | No | Info | ||
2015-03-02-2-4 | CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | Nemencio Daof, CT D08 - Fontana Southern Regional Laboratory | 03/20/2015 | Nemencio Daof | No | Info | ||
2015-03-02-2-5 | CTM 227-June 2012: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 03/09/2015 | Nader Rashidi | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2015-03-02-2-1 CTM 202-November 2011
DIME Test ID: 2015-03-02-2-2 CTM 206-October 2011
DIME Test ID: 2015-03-02-2-3 CTM 211-May 2010
DIME Test ID: 2015-03-02-2-4 CTM 214-August 2010
DIME Test ID: 2015-03-02-2-5 CTM 227-June 2012