Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2022-05-04-38

Project Information

Project IdentifiersProject ID: 993310
DEA: 020J3804
EFIS: 0219000111
DIST-CO-RTE-PM02-LAS-36-R20.5/22.8
Award Date02/04/2022
Closeout Date08/11/2023
Work DescriptionEXPAND EXISTING BRAKE CHECK AREA AND HMA PAVING.
Location DescriptionLASSEN COUNTY NEAR SUSANVILLE AT 1.3 MILES EAST OF ROUTE 44 AND FROM 0.1 MILE EAST OF EAGLE LAKE ROAD TO 1.3 MILES WEST OF HARRIS DRIVE
QA Service Level1 (Verified on 10/18/2021)

Sample Information

Sample Taken Date05/04/2022 Sample Unique Key38
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/05/2022
Sample typeAcceptance A brief description of the sampleLime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 23.0% RAP and virgin PG 58-34 M binder from Albina - Madras
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byCGI Last name of sampler or witnessed by.
Title of samplerConsultant Telephone number of sampler
Laboratory sample identificationD79023 Linked DIME Sample ID
The fabricator/manufacturer/facility nameHat Creek Construction, Ward Lake Plant, Litchfield, CA Transportation Laboratory (TL) Number898176
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-05-04-38-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/09/2022Darrell Valasek
No
Info
2022-05-04-38-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/09/2022Darrell Valasek
No
Info
2022-05-04-38-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/09/2022Darrell Valasek
No
Info
2022-05-04-38-4AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/19/2022Darrell Valasek
No
Info
2022-05-04-38-5AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Karen Dorado, CT D02 - Redding Northern Regional Laboratory05/20/2022Darrell Valasek
No
Info
2022-05-04-38-6AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Khue Yang, CT D02 - Redding Northern Regional Laboratory05/23/2022Darrell Valasek
No
Info
2022-05-04-38-7AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/09/2022Darrell Valasek
No
Info

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-05-04-38-1 AASHTO T209-12
DIME Test ID: 2022-05-04-38-2 AASHTO T275-07r12
DIME Test ID: 2022-05-04-38-3 AASHTO T269-14
DIME Test ID: 2022-05-04-38-4 AASHTO T283-14
DIME Test ID: 2022-05-04-38-5 AASHTO T308-10
DIME Test ID: 2022-05-04-38-6 AASHTO T30-19
DIME Test ID: 2022-05-04-38-7 AASHTO T312-14