Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2022-05-04-37
Project Information
Project Identifiers | Project ID: 993310 DEA: 020J3804 EFIS: 0219000111 |
---|---|
DIST-CO-RTE-PM | 02-LAS-36-R20.5/22.8 |
Award Date | 02/04/2022 |
Closeout Date | 08/11/2023 |
Work Description | EXPAND EXISTING BRAKE CHECK AREA AND HMA PAVING. |
Location Description | LASSEN COUNTY NEAR SUSANVILLE AT 1.3 MILES EAST OF ROUTE 44 AND FROM 0.1 MILE EAST OF EAGLE LAKE ROAD TO 1.3 MILES WEST OF HARRIS DRIVE |
QA Service Level | 1 (Verified on 10/18/2021) |
Sample Information
Sample Taken Date | 05/04/2022 | Sample Unique Key | 37 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/05/2022 |
Sample type | Acceptance | A brief description of the sample | 3/4-Inch Combined Untreated Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | CGI | Last name of sampler or witnessed by | . |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | D79025 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction, Ward Lake Plant, Litchfield, CA | Transportation Laboratory (TL) Number | 898178 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2022-05-04-37-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Darrell Valasek, CT D02 - Redding Northern Regional Laboratory | 05/12/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Karen Dorado, CT D02 - Redding Northern Regional Laboratory | 05/13/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Khue Yang, CT D02 - Redding Northern Regional Laboratory | 05/12/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-4 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Arthur Mills, CT D02 - Redding Northern Regional Laboratory | 05/13/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-5 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Karen Dorado, CT D02 - Redding Northern Regional Laboratory | 05/13/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-6 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Khue Yang, CT D02 - Redding Northern Regional Laboratory | 05/11/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Karen Dorado, CT D02 - Redding Northern Regional Laboratory | 05/11/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-8 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Khue Yang, CT D02 - Redding Northern Regional Laboratory | 05/12/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-9 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Karen Dorado, CT D02 - Redding Northern Regional Laboratory | 05/11/2022 | Darrell Valasek | No | Info | ||
2022-05-04-37-10 | AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index) | Khue Yang, CT D02 - Redding Northern Regional Laboratory | 05/12/2022 | Darrell Valasek | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2022-05-04-37-1 AASHTO T27-14
DIME Test ID: 2022-05-04-37-2 AASHTO T84-14
DIME Test ID: 2022-05-04-37-3 AASHTO T304-11
DIME Test ID: 2022-05-04-37-4 AASHTO T85-13
DIME Test ID: 2022-05-04-37-5 CTM 204-June 2010
DIME Test ID: 2022-05-04-37-6 AASHTO T335-09r13
DIME Test ID: 2022-05-04-37-7 ASTM D4791-10
DIME Test ID: 2022-05-04-37-8 AASHTO T176-08
DIME Test ID: 2022-05-04-37-9 AASHTO T96-02r10
DIME Test ID: 2022-05-04-37-10 AASHTO T210-15