Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2022-04-18-3

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215744
DEA: 033H93U4
EFIS: 0321000091
DIST-CO-RTE-PM03-YUB,BUT-70-25.5/25.8,0.0/3.8
Award Date07/15/2021
Closeout DateNot set
Work DescriptionWIDEN ROADWAY & SHOULDER, ADD TURN LANES & CONSTRUCT BRIDGE.
Location DescriptionYUBA AND BUTTE COUNTIES ABOUT 11 MILES NORTH OF MARYSVILLE FROM 0.8 MILE NORTH OF CHANDLER ROAD TO 0.2 MILE SOUTH OF EAST GRIDLEY ROAD
QA Service Level1 (Verified on 05/20/2021)

Sample Information

Sample Taken Date04/18/2022 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/20/2022
Sample typeQuality Assurance A brief description of the sample5/8" X 3-1/2" A325 MG BOLT
The quantity of what the sample constitutes85 From where was the sample collectedManufacturer
First name of sampler or witnessed bydong Last name of sampler or witnessed byShin
Title of samplerQA Inspector Telephone number of sampler205-999-5798
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameSt Louis Screw and Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB314-016-22 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)TT0152329
Heat Number(s)10493503, 116539, 6215168904, 10589380 10589380 Nut Mfg. Lot Number(s)UNYTITE Inc 33334-6215168904
Washer Mfg. Lot Number(s) 0721-892 Bolt SpecificationA 325
Bolt Length(s)3-1/2" Nut SpecificationA563-DH
Washer SpecificationF436 FinishMG, MG, MG WAX/DYE
Diameter/Size5/8" Bolt Mfg. Lot NumberSLSB M5189
Rocap Test Requirement(s)No Lubricant Requirements(s)No

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-04-18-3-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022spaine
Yes
04/29/2022A325 Wedge Tensile
2022-04-18-3-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022spaine
Yes
04/29/2022Nut Proof Load
2022-04-18-3-3ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022
2022-04-18-3-4ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022
2022-04-18-3-5ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022
2022-04-18-3-6ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022
2022-04-18-3-7ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022
2022-04-18-3-8ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022
2022-04-18-3-9ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022
2022-04-18-3-10ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/29/2022

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-04-18-3-1 ASTM F606-21 (Verified)
DIME Test ID: 2022-04-18-3-2 ASTM F606-21 (Verified)
DIME Test ID: 2022-04-18-3-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-04-18-3-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-04-18-3-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-04-18-3-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-04-18-3-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-04-18-3-8 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-04-18-3-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-16 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-17 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-04-18-3-18 ASTM E18-20 (Verified)
DIME Test ID: 2022-04-18-3-19 ASTM E18-20 (Verified)