Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-10-13-11
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214402
DEA: 010E7704
EFIS: 0115000009 |
|---|
| DIST-CO-RTE-PM | 01-HUM-101-R17.9/87.8 |
|---|
| Award Date | 01/21/2020 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | STRENGTHEN 2 BRIDGES. |
|---|
| Location Description | HUMBOLDT COUNTY AT SOUTH FORK EEL RIVER AND SEPARATION AND AT ARCATA OVERHEAD |
|---|
| QA Service Level | 1 (Verified on 09/16/2019) |
|---|
Sample Information
| Sample Taken Date | 10/13/2021 |
Sample Unique Key | 11 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 10/27/2021 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | 1" x 7 1/2" A325 bolts nuts and washers |
|---|
| The quantity of what the sample constitutes | 34 fastener assemblies |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
|---|
| Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | 2021-10-13-2 |
|---|
| The fabricator/manufacturer/facility name | CK Johnson |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-090-21 |
Structure unique identifier | |
|---|
| Structure name | Unknown |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 439950A |
|---|
| Heat Number(s) | Bolt- 100204282
Nut- 8000007906
washer- 32023170 |
Nut Mfg. Lot Number(s) | Nucor- 455386A |
|---|
| Washer Mfg. Lot Number(s) | Prestige- D9793 |
Bolt Specification | A325 type 1 |
|---|
| Bolt Length(s) | 7 1/2" |
Nut Specification | A563 |
|---|
| Washer Specification | F436 |
Finish | HDG |
|---|
| Diameter/Size | 1"x 7 1/2" |
Bolt Mfg. Lot Number | Nucor- 439950A |
|---|
| Rocap Test Requirement(s) | yes |
Lubricant Requirements(s) | yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-10-13-11-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/29/2021 | fsaylor | Yes | 11/03/2021 | A563 |
|
| 2021-10-13-11-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/29/2021 | fsaylor | Yes | 11/03/2021 | A325 |
|
| 2021-10-13-11-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/02/2021 | Fred Saylor | Yes | 11/03/2021 | |
|
| 2021-10-13-11-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/02/2021 | Fred Saylor | Yes | 11/03/2021 | |
|
| 2021-10-13-11-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/02/2021 | Fred Saylor | Yes | 11/03/2021 | |
|
| 2021-10-13-11-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/02/2021 | Fred Saylor | Yes | 11/03/2021 | |
|
| 2021-10-13-11-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/02/2021 | Fred Saylor | Yes | 11/03/2021 | |
|
| 2021-10-13-11-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/02/2021 | Fred Saylor | Yes | 11/03/2021 | |
|
137074137077137407137408137409137410137411137412
