Owner Lab
- CT QASI - Bay Area Field Laboratory
DIME Sample ID 2021-09-23-24
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214402
DEA: 010E7704
EFIS: 0115000009 |
|---|
| DIST-CO-RTE-PM | 01-HUM-101-R17.9/87.8 |
|---|
| Award Date | 01/21/2020 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | STRENGTHEN 2 BRIDGES. |
|---|
| Location Description | HUMBOLDT COUNTY AT SOUTH FORK EEL RIVER AND SEPARATION AND AT ARCATA OVERHEAD |
|---|
| QA Service Level | 1 (Verified on 09/16/2019) |
|---|
Sample Information
| Sample Taken Date | 09/23/2021 |
Sample Unique Key | 24 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/27/2021 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | 3/4"x 3 3/4" A325 HDG Fastener with nut and washer |
|---|
| The quantity of what the sample constitutes | 29 assemblies |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
|---|
| Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 cell |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | 2021-9-23-23 |
|---|
| The fabricator/manufacturer/facility name | CK Johnson Industries |
Transportation Laboratory (TL) Number | C658233 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-068-21 |
Structure unique identifier | |
|---|
| Structure name | unknown |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 443905AR |
|---|
| Heat Number(s) | Bolt- 100205304
Nut- 100108514
washer- B60790 |
Nut Mfg. Lot Number(s) | Nucor- 455273A
|
|---|
| Washer Mfg. Lot Number(s) | Prestige Stamping- E1386 |
Bolt Specification | A3125 -A325 typ 1 |
|---|
| Bolt Length(s) | 3 3/4" |
Nut Specification | A563 Gr DH |
|---|
| Washer Specification | F436 |
Finish | HDG |
|---|
| Diameter/Size | 3/4" |
Bolt Mfg. Lot Number | Nucor- 443905A |
|---|
| Rocap Test Requirement(s) | yes |
Lubricant Requirements(s) | yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-09-23-24-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | fsaylor | Yes | 10/01/2021 | A325 |
|
| 2021-09-23-24-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | fsaylor | Yes | 10/01/2021 | A325 |
|
| 2021-09-23-24-3 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | fsaylor | Yes | 10/01/2021 | A563 |
|
| 2021-09-23-24-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | |
|
| 2021-09-23-24-5 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | |
|
| 2021-09-23-24-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | |
|
| 2021-09-23-24-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | |
|
| 2021-09-23-24-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | |
|
| 2021-09-23-24-9 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | |
|
131578131609131615131654131655131656131657131658131659
