Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-09-22-5
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 215443
DEA: 042J8024
EFIS: 0419000294 |
|---|
| DIST-CO-RTE-PM | 04-SF-80-3.8/5.0 |
|---|
| Award Date | 04/20/2021 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | PAINT STEEL STRUCTURE. |
|---|
| Location Description | THE CITY AND COUNTY OF SAN FRANCISCO FROM 16TH STREET TO 4TH STREET. |
|---|
| QA Service Level | 1 (Verified on 02/23/2021) |
|---|
Sample Information
| Sample Taken Date | 09/22/2021 |
Sample Unique Key | 5 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/23/2021 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | A 325 7/8 hdg bolts nuts and washers |
|---|
| The quantity of what the sample constitutes | 32 sets A325 |
From where was the sample collected | Supplier |
|---|
| First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
|---|
| Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | 2021-09-21-2 |
|---|
| The fabricator/manufacturer/facility name | Bay Bolt |
Transportation Laboratory (TL) Number | C658231 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-065-21 |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 5274-01 |
|---|
| Heat Number(s) | bolt- 100894779
nut- 100202010
washer- 199076 |
Nut Mfg. Lot Number(s) | 434578A |
|---|
| Washer Mfg. Lot Number(s) | T27318934 |
Bolt Specification | A3125 a325 type 1 |
|---|
| Bolt Length(s) | 4 1/4" |
Nut Specification | A563 gr DH |
|---|
| Washer Specification | F436 |
Finish | HDG |
|---|
| Diameter/Size | 7/8 |
Bolt Mfg. Lot Number | 422725A |
|---|
| Rocap Test Requirement(s) | yes |
Lubricant Requirements(s) | yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-09-22-5-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/24/2021 | spaine | Yes | 09/27/2021 | A325 Wedge Tensile |
|
| 2021-09-22-5-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/24/2021 | spaine | Yes | 09/27/2021 | Nut Proof Load |
|
| 2021-09-22-5-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/27/2021 | |
|
| 2021-09-22-5-4 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/27/2021 | |
|
| 2021-09-22-5-5 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/27/2021 | |
|
| 2021-09-22-5-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/27/2021 | |
|
| 2021-09-22-5-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/27/2021 | |
|
| 2021-09-22-5-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/27/2021 | |
|
| 2021-09-22-5-9 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/27/2021 | |
|
130549130551130777130778130779130780130781130782130783
