Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-09-17-4
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213568
DEA: 034H6904
EFIS: 03190000026 |
|---|
| DIST-CO-RTE-PM | 03-SAC,SAC/SOL-12-0-0.4/
26.3-26.4, 0.0-0.4/26.3-26.4 |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Major Damage Restoration (Emergency Opening) |
|---|
| Location Description | Not set |
|---|
| QA Service Level | 1 (Verified on 08/24/2018) |
|---|
Sample Information
| Sample Taken Date | 09/17/2021 |
Sample Unique Key | 4 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/21/2021 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | 7/8 x 3" A325 HDG Bolts with Nuts and washers |
|---|
| The quantity of what the sample constitutes | 46 ea |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
|---|
| Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | 2021-09-17-01 |
|---|
| The fabricator/manufacturer/facility name | CK Johnson Industries |
Transportation Laboratory (TL) Number | c658228 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-061-21 |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 447026AR |
|---|
| Heat Number(s) | Bolt- 100205634
Nut-8000008882
Washer- 12021060 |
Nut Mfg. Lot Number(s) | Nucor -453592A |
|---|
| Washer Mfg. Lot Number(s) | Technical Stamping- D9779 |
Bolt Specification | AF3125 A325-1 |
|---|
| Bolt Length(s) | 3" |
Nut Specification | A563 |
|---|
| Washer Specification | F436 |
Finish | HDG |
|---|
| Diameter/Size | 7/8"-9x 3" |
Bolt Mfg. Lot Number | Fontana Fastener- 447026A |
|---|
| Rocap Test Requirement(s) | yes |
Lubricant Requirements(s) | yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-09-17-4-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/23/2021 | spaine | Yes | 09/28/2021 | A325 Wedge Tensile |
|
| 2021-09-17-4-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/23/2021 | spaine | Yes | 09/28/2021 | Nut Proof Load |
|
| 2021-09-17-4-3 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/28/2021 | |
|
| 2021-09-17-4-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/28/2021 | |
|
| 2021-09-17-4-5 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/28/2021 | |
|
| 2021-09-17-4-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/28/2021 | |
|
| 2021-09-17-4-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/28/2021 | |
|
| 2021-09-17-4-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/28/2021 | |
|
| 2021-09-17-4-9 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/27/2021 | Steven Paine | Yes | 09/28/2021 | |
|
130319130349130811130812130813130814130815130816130817
