Owner Lab
- CT HQ - Sacramento Cement Testing Laboratory
DIME Sample ID 2021-08-19-29
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 8801
DEA: AML-CEM
EFIS: AML-CEM |
|---|
| DIST-CO-RTE-PM | 59--- |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Special project for Cementitious Materials for use in Concrete Authorized Material List (AML) |
|---|
| Location Description | Not set |
|---|
| QA Service Level | NOT VERIFIED |
|---|
Sample Information
| Sample Taken Date | 08/19/2021 |
Sample Unique Key | 29 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 08/19/2021 |
|---|
| Sample type | Annual Source Testing |
A brief description of the sample | Type II/IV Portland Cement |
|---|
| The quantity of what the sample constitutes | 1 Bucket |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | na |
Last name of sampler or witnessed by | na |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | CM215149 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | CEMEX |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Cementitious |
Brand | Cemex |
|---|
| Mill | Vissai |
Type of Cementitious Material | Type II/V Cement |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-08-19-29-2 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Anthony Valdez | CT HQ - Sacramento Cement Testing Laboratory | 09/23/2021 | Benjamin Lenz | Yes | 10/27/2021 | 3 day test -- Specimen 1 was eliminated from the average for being outside allowable limits per Section 14 of ASTM C109 |
|
| 2021-08-19-29-3 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Anthony Valdez | CT HQ - Sacramento Cement Testing Laboratory | 09/27/2021 | Benjamin Lenz | Yes | 10/27/2021 | 7 day test |
|
| 2021-08-19-29-4 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Anthony Valdez | CT HQ - Sacramento Cement Testing Laboratory | 10/18/2021 | Benjamin Lenz | Yes | 10/27/2021 | 28 day test |
|
| 2021-08-19-29-5 | ASTM C185-15a: Standard Test Method for Air Content of Hydraulic Cement Mortar | Anthony Valdez | CT HQ - Sacramento Cement Testing Laboratory | 09/22/2021 | Benjamin Lenz | Yes | 10/27/2021 | |
|
| 2021-08-19-29-6 | ASTM C191-13: Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle | Anthony Valdez | CT HQ - Sacramento Cement Testing Laboratory | 10/25/2021 | Benjamin Lenz | Yes | 10/27/2021 | |
|
| 2021-08-19-29-7 | ASTM C204-11: Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus | Anthony Valdez | CT HQ - Sacramento Cement Testing Laboratory | 09/02/2021 | Benjamin Lenz | Yes | 10/27/2021 | |
|
136678136679136683136684136685136686
