Sample Record

Owner Lab

  • CT HQ - QASI Bay Area Field Office

DIME Sample ID 2021-08-26-3

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211848
DEA: 112T2174
EFIS: 1116000131
DIST-CO-RTE-PM11-SD-5-R37.4 - R46.5
Award Date12/22/2016
Closeout DateNot set
Work Description(Alternative Delivery) CMGC, San Elijo Highway Bridge Replacement. Replace the San Elijo lagoon highway bridge, construct HOV lanes, construct bike and pedestrian trails and bridge, build multi-use facility at Manchester Ave.
Location DescriptionIN SAN DIEGO COUNTY IN SOLANA BEACH AND ENCINITAS FROM 0.1 MILE NORTH OF LOMAS SANTA FE DRIVE OVERCROSSING TO 0.2 MILE SOUTH OF BIRMINGHAM DRIVE OVERCROSSING
QA Service Level1 (Verified on 01/31/2017)

Sample Information

Sample Taken Date08/26/2021 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/01/2021
Sample typeQuality Assurance A brief description of the sampleU-bolt with HHN and Acorn Nuts
The quantity of what the sample constitutes1 lot of 450 From where was the sample collectedFabricator
First name of sampler or witnessed byStacey Last name of sampler or witnessed byDavis
Title of samplerQAI Telephone number of sampler5624806984
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility namePortland Bolt - Oregon Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB362-035-21 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)Not applicable
Heat Number(s)10712390 Bolt, 6215287403 HHN, 194689 Acorn Nut Nut Mfg. Lot Number(s)33753
Washer Mfg. Lot Number(s)not applicable Bolt SpecificationASTM A193B7
Bolt Length(s)9-1/2" Nut SpecificationASTM A194 Grade 2H
Washer SpecificationASTM A29 FinishHDG
Diameter/Size5/8" x 9-1/2" x 3-3/8" x 4" Bolt Mfg. Lot Numbernot applicable
Rocap Test Requirement(s)Not applicable Lubricant Requirements(s)Yes

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-08-26-3-21ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/02/2021Fred Saylor
Yes
09/02/2021
2021-08-26-3-22ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/02/2021Fred Saylor
Yes
09/02/2021
2021-08-26-3-23ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/02/2021Fred Saylor
Yes
09/02/2021
2021-08-26-3-24ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/02/2021Fred Saylor
Yes
09/02/2021
2021-08-26-3-25ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/02/2021Fred Saylor
Yes
09/02/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-08-26-3-1 ASTM F606-14 (Verified)
DIME Test ID: 2021-08-26-3-2 ASTM F606-14 (Verified)
DIME Test ID: 2021-08-26-3-3 ASTM F606-14a (Verified)
DIME Test ID: 2021-08-26-3-4 ASTM F606-14a (Verified)
DIME Test ID: 2021-08-26-3-5 ASTM F606-14a (Verified)
DIME Test ID: 2021-08-26-3-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-08-26-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-18 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-19 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-22 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-23 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-24 ASTM B499-14 (Verified)
DIME Test ID: 2021-08-26-3-25 ASTM B499-14 (Verified)