Owner Lab
- CT HQ - Sacramento Asphalt Binder Laboratory
DIME Sample ID 2021-06-25-19
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 215624
DEA: 020J4004
EFIS: 0219000115 |
|---|
| DIST-CO-RTE-PM | 02-SIS-161-17.5/18.5 |
|---|
| Award Date | 05/11/2021 |
|---|
| Closeout Date | 09/27/2021 |
|---|
| Work Description | FULL DEPTH RECLAMATION - CEMENT AND PLACE HMA. |
|---|
| Location Description | SISKIYOU COUNTY NEAR TULELAKE FROM 0.3 MILE EAST OF MALONE ROAD TO 1.2 MILES EAST OF HILL ROAD |
|---|
| QA Service Level | 1 (Verified on 04/19/2021) |
|---|
Sample Information
| Sample Taken Date | 06/25/2021 |
Sample Unique Key | 19 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 07/13/2021 |
|---|
| Sample type | Acceptance |
A brief description of the sample | PG58-34M |
|---|
| The quantity of what the sample constitutes | 1 OF 2 CANS |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | RANDY |
Last name of sampler or witnessed by | BIBBINS |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Albina - Klamath Falls, OR |
Transportation Laboratory (TL) Number | 990940 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Asphalt Binder |
Performance Grade | PG 58-34 M |
|---|
| Modified | Yes |
Lot number | |
|---|
| Sublot number | |
Tank number | |
|---|
| Time of sample | |
HMA Supplier | |
|---|
| Asphalt Binder Supplier | Albina Asphalt - Klamath Falls Plant - Klamath Falls OR |
Multigrade | No |
|---|
| Multigrade Type | |
HMA Design ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-06-25-19-1 | AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) | Harish Thakur | CT HQ - Sacramento Asphalt Binder Laboratory | 07/16/2021 | Harish Thakur | Yes | 07/23/2021 | as per 2018 standard specs |
|
| 2021-06-25-19-2 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 07/16/2021 | Eva Torres | Yes | 07/23/2021 | ORIG |
|
| 2021-06-25-19-3 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 07/16/2021 | Eva Torres | Yes | 07/23/2021 | RTFO |
|
| 2021-06-25-19-4 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Erika Gonzalez | CT HQ - Sacramento Asphalt Binder Laboratory | 07/20/2021 | Erika Gonzalez | Yes | 07/23/2021 | per standard specifications |
|
| 2021-06-25-19-5 | AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | Ruben Macias | CT HQ - Sacramento Asphalt Binder Laboratory | 07/21/2021 | Ruben Macias | Yes | 07/23/2021 | |
|
| 2021-06-25-19-6 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 07/16/2021 | Eva Torres | Yes | 07/23/2021 | Delta (max, degree) is 73 at 2.2 kPa < 80 max per spec. |
|
119255119260119369119860119960119373
