Sample Record
Owner Lab
- CT HQ - Sacramento Asphalt Binder Laboratory
DIME Sample ID 2021-07-01-25
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 215367 DEA: 021J4904 EFIS: 0220000084 |
---|---|
DIST-CO-RTE-PM | 02-TEH-32-14.0/20.0 |
Award Date | 02/02/2021 |
Closeout Date | 04/11/2024 |
Work Description | PLACE HOT MIX ASPHALT (TYPE A). |
Location Description | TEHAMA COUNTY ABOUT 28 MILES EAST OF FOREST RANCH FROM 1.1 MILES EAST OF DEER CREEK BRIDGE NO. 08-0068 TO 0.4 MILE WEST OF SLATE CREEK BRIDGE NO. 08-0154 |
QA Service Level | 1 (Verified on 12/24/2020) |
Sample Information
Sample Taken Date | 07/01/2021 | Sample Unique Key | 25 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/13/2021 |
Sample type | Acceptance | A brief description of the sample | PG 64-16 |
The quantity of what the sample constitutes | 1 OF 2 CANS | From where was the sample collected | Source |
First name of sampler or witnessed by | R | Last name of sampler or witnessed by | STURGES |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Albina Asphalt - Klamath FAlls, OR | Transportation Laboratory (TL) Number | 996933 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-16 |
---|---|---|---|
Modified | No | Lot number | |
Sublot number | Tank number | ||
Time of sample | HMA Supplier | ||
Certified Asphalt Supplier | Albina Asphalt - Klamath Falls Plant - Klamath Falls OR | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2021-07-01-25-1 | AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) | Harish Thakur, CT HQ - Sacramento Asphalt Binder Laboratory | 07/16/2021 | Harish Thakur | Yes | 07/22/2021 | as per 2018 standard specs | |
2021-07-01-25-2 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory | 07/16/2021 | Eva Torres | Yes | 07/22/2021 | ORIG | |
2021-07-01-25-3 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory | 07/16/2021 | Eva Torres | Yes | 07/22/2021 | RTFO | |
2021-07-01-25-4 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Erika Gonzalez, CT HQ - Sacramento Asphalt Binder Laboratory | 07/20/2021 | Erika Gonzalez | Yes | 07/22/2021 | per standard specifications | |
2021-07-01-25-5 | AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | Ruben Macias, CT HQ - Sacramento Asphalt Binder Laboratory | 07/21/2021 | Ruben Macias | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2021-07-01-25-1 AASHTO T240-17 (Verified)
DIME Test ID: 2021-07-01-25-2 AASHTO T315-16 (Verified)
DIME Test ID: 2021-07-01-25-3 AASHTO T315-16 (Verified)
DIME Test ID: 2021-07-01-25-4 AASHTO T315-16 (Verified)
DIME Test ID: 2021-07-01-25-5 AASHTO T313-19