Sample Record

Owner Lab

  • CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-06-30-14

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215251
DEA: 021J4604
EFIS: 0220000081
DIST-CO-RTE-PM02-SIS-96-34.5/38.8,88.0/92.0
Award Date02/02/2021
Closeout Date09/27/2021
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE.
Location DescriptionSISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE
QA Service Level1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date06/30/2021 Sample Unique Key14
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/06/2021
Sample typeAcceptance A brief description of the samplePG58-34M
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedManufacturer
First name of sampler or witnessed byD Last name of sampler or witnessed byOwnes
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameValero - Benicia, CA Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Asphalt Binder SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type HMA Design ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-06-30-14-1AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Harish ThakurCT HQ - Sacramento Asphalt Binder Laboratory07/14/2021Harish Thakur
Yes
07/15/2021Per 2018 Standard Specifications
2021-06-30-14-2AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory07/14/2021Eva Torres
Yes
07/15/2021Per 2018 Standard Specifications ORG
2021-06-30-14-3AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory07/14/2021Eva Torres
Yes
07/15/2021Per 2018 Standard Specifications RTFO
2021-06-30-14-4AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Delta at 2.2 kpa)Juan GomezCT HQ - Sacramento Asphalt Binder Laboratory07/15/2021Juan Gomez
Yes
07/15/2021Per 2018 Standard Specifications
2021-06-30-14-5AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory07/15/2021Eva Torres
Yes
07/15/2021Per 2018 Standard Specifications PAV
2021-06-30-14-6AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Ruben MaciasCT HQ - Sacramento Asphalt Binder Laboratory07/15/2021Ruben Macias
Yes
07/15/2021Per 2018 Standard Specifications
2021-06-30-14-7AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory07/14/2021Eva Torres
Yes
07/15/2021Per 2018 Standard Specifications rtfo+6