Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-04-23-23

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215251
DEA: 021J4604
EFIS: 0220000081
DIST-CO-RTE-PM02-SIS-96-34.5/38.8,88.0/92.0
Award Date02/02/2021
Closeout Date09/27/2021
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE.
Location DescriptionSISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE
QA Service Level1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date04/23/2021 Sample Unique Key23
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/23/2021
Sample typeVerification A brief description of the sample1/2-inch Type A Untreated Virgin Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byDevin Last name of sampler or witnessed byOwens
Title of samplerPEI Telephone number of sampler
Laboratory sample identificationD78785F Linked DIME Sample ID
The fabricator/manufacturer/facility nameShasta Ranch Aggregates - Anderson, CA Transportation Laboratory (TL) Number897292
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0057
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedLaboratory Batched
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberJMF 21-05-S01 Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-61 Date Created06/18/2021
JMF Submittal IDJMF3511-22-2021-78 JMF StatusSubmittal Authorized For Use
Producer Mix IDL210154 Authorized Date07/06/2021

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-04-23-23-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Ward Jenkins, CT D02 - Redding Northern Regional Laboratory06/22/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-2CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Terry McCormick, CT D02 - Redding Northern Regional Laboratory06/28/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-3AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)W. Jenkins and T. McCormick, CT D02 - Redding Northern Regional Laboratory06/28/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-4AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)D. Hickey and K. Rios Dorado, CT D02 - Redding Northern Regional Laboratory06/26/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory06/28/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory06/28/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-8AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory06/26/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-9AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory06/26/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-11ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory06/28/2021Ward Jenkins
Yes
06/28/2021
2021-04-23-23-12AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Terry McCormick, CT D02 - Redding Northern Regional Laboratory06/28/2021Ward Jenkins
Yes
06/28/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-04-23-23-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-04-23-23-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-04-23-23-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-04-23-23-4 AASHTO T85-13 (Verified)
DIME Test ID: 2021-04-23-23-5 AASHTO T84-14 (Verified)
DIME Test ID: 2021-04-23-23-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-04-23-23-8 AASHTO T176-08 (Verified)
DIME Test ID: 2021-04-23-23-9 AASHTO T210-15 (Verified)
DIME Test ID: 2021-04-23-23-11 ASTM D4791-10 (Verified)
DIME Test ID: 2021-04-23-23-12 AASHTO T304-11 (Verified)