Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2021-06-08-17
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 210735 DEA: 071193U4 EFIS: 0713000007 |
DIST-CO-RTE-PM | 07-LA-10-37.2/42.4 |
Award Date | 11/16/2015 |
Closeout Date | Not set |
Work Description | CONSTRUCT HOV LANES, WIDEN BRIDGES, AND REALIGN RAMPS. |
Location Description | IN LA COUNTY FROM CITRUS STREET IN WEST COVINA TO ROUTE 57 IN POMONA |
QA Service Level | 1 (Verified on 03/07/2016) |
Sample Information
Sample Taken Date | 06/08/2021 |
Sample Unique Key | 17 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 06/11/2021 |
Sample type | Verification |
A brief description of the sample | PSUE 3/4" RHMA-G-SP 0.5% LAS |
The quantity of what the sample constitutes | 4 Bags Of Combined Agg. |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | All American Asphalt |
Last name of sampler or witnessed by | QC |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | 0356G-21 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | All American Asphalt-Irwindale |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-33-0005 |
The fabricator's/manufacturer's product name for the sample | 3/4 RHMA-G-SP |
The fabricator/manufacturer designation for the sample | |
The plant number | 106835 |
A detailed description of where the material sample was collected | Belt Cut at All American Irwindale Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | |
Lot number | |
Sublot number | |
JMF Verification ID | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-06-08-17-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/Sebastian Ferrer | CT - Southern Regional Laboratory | 06/14/2021 | Satish Jain | Yes | 06/24/2021 | Combined Virgin Aggregate Gradation | |
2021-06-08-17-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Sebastian Ferrer | CT - Southern Regional Laboratory | 06/15/2021 | Satish Jain | Yes | 06/24/2021 | | |
2021-06-08-17-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Sebastian Ferrer | CT - Southern Regional Laboratory | 06/15/2021 | Satish Jain | Yes | 06/24/2021 | | |
2021-06-08-17-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Friday Ofoegbu | CT - Southern Regional Laboratory | 06/16/2021 | Satish Jain | Yes | 06/24/2021 | | |
2021-06-08-17-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Friday Ofoegbu | CT - Southern Regional Laboratory | 06/17/2021 | Satish Jain | Yes | 06/24/2021 | | |
2021-06-08-17-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 06/17/2021 | Satish Jain | Yes | 06/24/2021 | | |
2021-06-08-17-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 06/17/2021 | Satish Jain | Yes | 06/24/2021 | | |
2021-06-08-17-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 06/17/2021 | Satish Jain | Yes | 06/24/2021 | | |
116150116153116155116157116158116160116161116163