Sample Record

Owner Lab

  • CT D03 - North Region Materials Lab

DIME Sample ID 2021-04-01-33

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215062
DEA: 030F2904
EFIS: 0314000101
DIST-CO-RTE-PM03-BUT-99-14.9/15.7
Award Date09/24/2021
Closeout DateNot set
Work DescriptionCONSTRUCT BRIDGE AND ROADWAY; & REMOVE BRIDGE.
Location DescriptionBUTTE COUNTY ABOUT 10 MILES NORTH OF GRIDLEY FROM 0.3 MILE SOUTH TO 0.5 MILE NORTH OF NELSON AVENUE
QA Service Level1 (Verified on 07/20/2020)

Sample Information

Sample Taken Date04/01/2021 Sample Unique Key33
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/01/2021
Sample typeVerification A brief description of the sample3/4" HMA - A w/RAP
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byTeichert Personnel (SAMPLER) Last name of sampler or witnessed by Brad McKeehan (WITNESS)
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample IDJMF21-020B
The fabricator/manufacturer/facility nameTeichert - Hallwood Plant Transportation Laboratory (TL) NumberC706327
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number JMF Verification ID JMF3513-2021-55

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-04-01-33-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)Benjamin Dreher CT D03 - North Region Materials Lab05/11/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-33-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Benjamin Dreher CT D03 - North Region Materials Lab05/11/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-33-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Benjamin Dreher CT D03 - North Region Materials Lab05/12/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-33-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Jeff HerbertCT D03 - North Region Materials Lab05/12/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B. Jeff Herbert
2021-04-01-33-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Jeff HerbertCT D03 - North Region Materials Lab05/13/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-33-6THIS TEST HAS BEEN SUPERSEDED.
AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Jeff HerbertCT D03 - North Region Materials Lab05/13/2021Kavon Rastegar
Yes
06/03/2021THIS TEST HAS BEEN SUPERSEDED.
JMF21-020B.
2021-04-01-33-7AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Jeff HerbertCT D03 - North Region Materials Lab05/13/2021Kavon Rastegar
Yes
06/30/2021JMF21-020B.