Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-02-19-25
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 212085
DEA: 07296604
EFIS: 0713000057 |
|---|
| DIST-CO-RTE-PM | 07-LA-10-14.0/19.0 |
|---|
| Award Date | 06/04/2018 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | PAINT AND REHABILITATE BRIDGE - (STRAIN (PAINT AND INSTALL CATWALK) |
|---|
| Location Description | IN THE CITY OF LOS ANGELES, AT SANTA MONICA VIADUCT (BR. NO. 53-1301). PAINT AND REHABILITATE BRIDGE |
|---|
| QA Service Level | 1 (Verified on 07/25/2018) |
|---|
Sample Information
| Sample Taken Date | 02/19/2021 |
Sample Unique Key | 25 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 02/19/2021 |
|---|
| Sample type | Verification |
A brief description of the sample | A325 Fastener Assembly |
|---|
| The quantity of what the sample constitutes | 20 |
From where was the sample collected | Distributor |
|---|
| First name of sampler or witnessed by | Brian |
Last name of sampler or witnessed by | Murray |
|---|
| Title of sampler | QA Inspector |
Telephone number of sampler | 213 435 4055 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Page Industrial |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L140-048-21 |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
|---|
| Heat Number(s) | |
Nut Mfg. Lot Number(s) | 441442A |
|---|
| Washer Mfg. Lot Number(s) | 034103 |
Bolt Specification | ASTM A325TC |
|---|
| Bolt Length(s) | 3 1/4" |
Nut Specification | ASTM A563 |
|---|
| Washer Specification | ASTM F436 |
Finish | Mechanical Galvanized |
|---|
| Diameter/Size | 3/4" |
Bolt Mfg. Lot Number | 446709A |
|---|
| Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-02-19-25-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/11/2021 | spaine | Yes | 03/16/2021 | A325 Wedge Tensile |
|
| 2021-02-19-25-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/12/2021 | fsaylor | Yes | 03/16/2021 | Proof Load |
|
| 2021-02-19-25-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/16/2021 | Steven Paine | Yes | 03/16/2021 | |
|
| 2021-02-19-25-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/16/2021 | Steven Paine | Yes | 03/16/2021 | |
|
| 2021-02-19-25-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/16/2021 | Steven Paine | Yes | 03/16/2021 | |
|
| 2021-02-19-25-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/16/2021 | Steven Paine | Yes | 03/16/2021 | |
|
| 2021-02-19-25-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/16/2021 | Steven Paine | Yes | 03/16/2021 | |
|
| 2021-02-19-25-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/16/2021 | Steven Paine | Yes | 03/16/2021 | |
|
106262106325106649106651106652106653106654106655
