Owner Lab
- CT QASI - Sacramento Field Laboratory
DIME Sample ID 2021-02-10-2
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213406
DEA: 030F2504
EFIS: 0300000075 |
|---|
| DIST-CO-RTE-PM | 03-YOL,SAC-80-R11.1/R11.7,M0.0/M0.5 |
|---|
| Award Date | 08/21/2020 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | SAC RIVER BOH (BRYTE BEND) |
|---|
| Location Description | SACRAMENTO AND YOLO COUNTIES IN WEST SACRAMENTO AND SACRAMENTO FROM 0.1 MILE WEST OF REED AVENUE UNDERCROSSING TO 0.1 MILE EAST OF SACRAMENTO RIVER BRIDGE AND OVERHEAD |
|---|
| QA Service Level | 1 (Verified on 06/07/2018) |
|---|
Sample Information
| Sample Taken Date | 02/10/2021 |
Sample Unique Key | 2 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 02/12/2021 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | ASTM A325 Bolts 5/8"x1-3/4" |
|---|
| The quantity of what the sample constitutes | 5,563 bolts |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Mahlon |
Last name of sampler or witnessed by | Lindenmuth |
|---|
| Title of sampler | QA Inspector |
Telephone number of sampler | 646-740-3704 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | CK Johnson |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | S46-150-21 |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 448446A |
|---|
| Heat Number(s) | 100104708 |
Nut Mfg. Lot Number(s) | N/A |
|---|
| Washer Mfg. Lot Number(s) | N/A |
Bolt Specification | ASTM A325 |
|---|
| Bolt Length(s) | 1-3/4' |
Nut Specification | N/A |
|---|
| Washer Specification | N/A |
Finish | ASTM F2329 HDG |
|---|
| Diameter/Size | 5/8" |
Bolt Mfg. Lot Number | N/A |
|---|
| Rocap Test Requirement(s) | YES |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-02-10-2-1 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-7 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
| 2021-02-10-2-10 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/26/2021 | Brian Ewing | Yes | 03/02/2021 | |
|
105401105402105403105404105405105406105407105408105409105410
