Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-09-02-39

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214875
DEA: 033H72U4
EFIS: 0320000087
DIST-CO-RTE-PM03-BUT-70-5.6/9.1
Award Date06/16/2020
Closeout Date08/10/2023
Work DescriptionROADWAY EXCAVATION, PLACE HMA & RHMA, & CONSTRUCT DRAINAGE SYSTEMS.
Location DescriptionBUTTE COUNTY NEAR OROVILLE FROM 0.2 MILE NORTH OF COX LANE TO 0.1 MILE NORTH OF PALERMO ROAD
QA Service Level1 (Verified on 04/15/2020)

Sample Information

Sample Taken Date09/02/2020 Sample Unique Key39
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/03/2020
Sample typeVerification A brief description of the sample3/4" HMA - A w/RAP
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byBrad Last name of sampler or witnessed byMckeehan (WITNESS)
Title of samplerKRC Personnel Telephone number of sampler
Laboratory sample identificationJMF20-038 Linked DIME Sample ID
The fabricator/manufacturer/facility nameKnife River Construction - Hallwood Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-10 Date Created01/27/2021
JMF Submittal IDJMF3511-23-2021-12 JMF StatusSubmittal Accepted for Verification
Producer Mix IDHR-22771000 Authorized DateN/A

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-09-02-39-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terrance White, CT D03 - Olivehurst Northern Regional Laboratory09/08/2020Kavon Rastegar
Yes
02/01/2021JMF20-038.
2020-09-02-39-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory09/09/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-39-3AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Benjamin Dreher, CT D03 - Olivehurst Northern Regional Laboratory09/08/2020Kavon Rastegar
Yes
02/01/2021JMF20-038.
2020-09-02-39-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory09/10/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-39-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory09/11/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-39-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory09/14/2020Kavon Rastegar
Yes
02/01/2021JMF20-038

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-09-02-39-1 AASHTO T308-10 (Verified)
DIME Test ID: 2020-09-02-39-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2020-09-02-39-3 AASHTO T209-12 (Verified)
DIME Test ID: 2020-09-02-39-4 AASHTO T269-14 (Verified)
DIME Test ID: 2020-09-02-39-5 AASHTO T283-14 (Verified)
DIME Test ID: 2020-09-02-39-6 AASHTO T324-14 (Verified)