Sample Record

Owner Lab

  • CT D03 - North Region Materials Lab

DIME Sample ID 2020-09-02-38

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214875
DEA: 033H72U4
EFIS: 0320000087
DIST-CO-RTE-PM03-BUT-70-5.6/9.1
Award Date06/16/2020
Closeout DateNot set
Work DescriptionROADWAY EXCAVATION, PLACE HMA & RHMA, & CONSTRUCT DRAINAGE SYSTEMS.
Location DescriptionBUTTE COUNTY NEAR OROVILLE FROM 0.2 MILE NORTH OF COX LANE TO 0.1 MILE NORTH OF PALERMO ROAD
QA Service Level1 (Verified on 04/15/2020)

Sample Information

Sample Taken Date09/02/2020 Sample Unique Key38
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/28/2020
Sample typeVerification A brief description of the sample3/4" HMA - A w/RAP
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byBrad Last name of sampler or witnessed byMckeehan (WITNESS)
Title of samplerKRC Personnel Telephone number of sampler
Laboratory sample identificationJMF20-038 Linked DIME Sample ID
The fabricator/manufacturer/facility nameKnife River Construction - Hallwood Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-58-0002
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID JMF3513-2021-10

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-09-02-38-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Thomas StinnettCT D03 - North Region Materials Lab09/07/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Thomas Stinnett CT D03 - North Region Materials Lab09/07/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-3AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Thomas Stinnett CT D03 - North Region Materials Lab08/31/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Thomas Stinnett CT D03 - North Region Materials Lab09/04/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) Thomas Stinnett CT D03 - North Region Materials Lab09/03/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-6CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Jeff HerbertCT D03 - North Region Materials Lab09/02/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Thomas Stinnett CT D03 - North Region Materials Lab09/01/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Thomas Stinnett CT D03 - North Region Materials Lab09/01/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.
2020-09-02-38-9AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Thomas Stinnett CT D03 - North Region Materials Lab08/31/2020Kavon Rastegar
Yes
02/01/2021JMF20-038. Test date estimated.