Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2020-12-23-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214888
DEA: 120P5204
EFIS: 1215000137
DIST-CO-RTE-PM12-ORA-22,57-R9.4/L9.8,10.9/11.4
Award Date05/22/2020
Closeout DateNot set
Work DescriptionREPLACE CONC BARRIER & SIGN PANEL; & MODIFY LIGHTING SYSTEM.
Location DescriptionORANGE COUNTY IN ORANGE ON ROUTE 22 FROM LEWIS STREET OVERCROSSING TO 0.1 MILE WEST OF THE CITY DRIVE UNDERCROSSING AND ON ROUTE 57 FROM 0.3 MILE SOUTH OF CHAPMAN AVENUE UNDERCROSSING TO 0.4 MILE SOUTH OF ORANGEWOOD AVENUE UNDERCROSSING
QA Service Level1 (Verified on 07/21/2020)

Sample Information

Sample Taken Date12/23/2020 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/04/2021
Sample typeVerification A brief description of the sampleAnchor Bolt Assembly
The quantity of what the sample constitutes48 ea. From where was the sample collectedOther
First name of sampler or witnessed byChris Last name of sampler or witnessed byDsouza
Title of sampler Telephone number of sampler6469423585
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameEDSCO Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)3101507 Nut Mfg. Lot Number(s)XYY2 HDG Nut XSF2 Plain Nut
Washer Mfg. Lot Number(s)6186 Bolt SpecificationF1554 Gr55
Bolt Length(s)4'-4" Nut SpecificationA194 Grade 2H
Washer SpecificationF436 Finish
Diameter/Size3" Bolt Mfg. Lot Number
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-12-23-1-1ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/04/2021Fred Saylor
Yes
01/06/2021
2020-12-23-1-2ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/04/2021Fred Saylor
Yes
01/06/2021
2020-12-23-1-3ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/04/2021Fred Saylor
Yes
01/06/2021
2020-12-23-1-4ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/04/2021Fred Saylor
Yes
01/06/2021
2020-12-23-1-5ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/04/2021Fred Saylor
Yes
01/06/2021
2020-12-23-1-6ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/04/2021Fred Saylor
Yes
01/06/2021
2020-12-23-1-7ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/04/2021Fred Saylor
Yes
01/06/2021
2020-12-23-1-8ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)fsaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/05/2021fsaylor
Yes
01/06/2021
2020-12-23-1-9ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)fsaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/05/2021fsaylor
Yes
01/06/2021
2020-12-23-1-10ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory01/05/2021Fred Saylor
Yes
01/06/2021