DIME » All Projects » Project - DEA: 031E0604 » Sample 2020-04-17-19 » Sample Details

Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-04-17-19

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212914
DEA: 031E0604
EFIS: 0312000068
DIST-CO-RTE-PM03-YUB-70-15.5/16.5
Award Date07/31/2019
Closeout Date08/30/2023
Work DescriptionSIMMERLY SLOUGH BRIDGE REPLACEMENT BR 16-0019 WITH BR 16-0055.
Location DescriptionNEAR MARYSVILLE, FROM 0.1 MILE NORTH OF BINNEY JUNCTION UNDERPASS TO 0.3 MILE NORTH OF LAURELLEN ROAD, AT SIMMERLY SLOUGH BRIDGE BR 16-0019.
QA Service Level1 (Verified on 08/22/2019)

Sample Information

Sample Taken Date04/17/2020 Sample Unique Key19
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/20/2020
Sample typeVerification A brief description of the sample3/4 inch RHMA-G
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byKenny witness not sampler Last name of sampler or witnessed byMcHugh witness not sampler
Title of samplerTeichert Personnel Telephone number of sampler
Laboratory sample identificationJMF20-018 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTeichert Hallwood Transportation Laboratory (TL) NumberC741852
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-58-0006::HALLWOOD PLANT
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2020-221 Date Created11/20/2020
JMF Submittal IDJMF3511-23-2020-309 JMF StatusSubmittal Accepted for Verification
Producer Mix IDHD201913 Authorized DateN/A

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-04-17-19-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018
2020-04-17-19-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018. Test date estimated
2020-04-17-19-3AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018. Test date estimated
2020-04-17-19-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018. Test date estimated
2020-04-17-19-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018. Test date estimated
2020-04-17-19-6CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018. Test date estimated
2020-04-17-19-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018, Test date estimated
2020-04-17-19-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018. Test date estimated.
2020-04-17-19-9AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory04/21/2020Kavon Rastegar
Yes
11/23/2020JMF20-018. Test date estimated.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-04-17-19-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-04-17-19-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-04-17-19-3 AASHTO T176-08 (Verified)
DIME Test ID: 2020-04-17-19-4 AASHTO T304-11 (Verified)
DIME Test ID: 2020-04-17-19-5 ASTM D4791-10 (Verified)
DIME Test ID: 2020-04-17-19-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-04-17-19-7 AASHTO T85-13 (Verified)
DIME Test ID: 2020-04-17-19-8 AASHTO T84-14 (Verified)
DIME Test ID: 2020-04-17-19-9 AASHTO T27-14 (Verified)