Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-11-16-10

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214921
DEA: 09367404
EFIS: 0916000025
DIST-CO-RTE-PM09-KER-14-R4.7/R12.6
Award DateNot set
Closeout Date01/23/2023
Work DescriptionCONSTRUCT CRCP OVER EXISTING PAVEMENT AND PLACE HMA.
Location DescriptionKERN COUNTY AT AND NEAR ROSAMOND AND MOJAVE FROM 1.4 MILES SOUTH OF DAWN ROAD OVERCROSSING TO 0.5 MILE NORTH OF SILVER QUEEN ROAD OVERCROSSING
QA Service Level1 (Verified on 11/06/2020)

Sample Information

Sample Taken Date11/16/2020 Sample Unique Key10
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/17/2020
Sample typeVerification A brief description of the samplePSUE 3/4" HMA-A-SP R25 0.8% Dry Lime
The quantity of what the sample constitutes3 Bags Of Coldfeed Agg., 1 Bag Of Combined L.T. Agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byWilliam Last name of sampler or witnessed byLucas
Title of sampler Telephone number of sampler
Laboratory sample identification0669A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Construction Company Little Rock Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-19-0046, 91-19-0008
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R25 The fabricator/manufacturer designation for the sample
The plant number13554 A detailed description of where the material sample was collectedBelt Cut at Granite Little Rock Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-11-16-10-1THIS TEST HAS BEEN SUPERSEDED.
AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Satish Jain/Dominic Montemayor, CT D08 - Fontana Southern Regional Laboratory11/18/2020Satish Jain
Yes
11/25/2020THIS TEST HAS BEEN SUPERSEDED.
Combined Virgin Aggregate Gradation
2020-11-16-10-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory11/20/2020Satish Jain
Yes
11/25/2020
2020-11-16-10-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory11/19/2020Satish Jain
Yes
11/25/2020
2020-11-16-10-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory11/19/2020Satish Jain
Yes
11/25/2020
2020-11-16-10-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory11/20/2020Satish Jain
Yes
11/25/2020
2020-11-16-10-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory11/20/2020Satish Jain
Yes
11/25/2020
2020-11-16-10-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory11/20/2020Satish Jain
Yes
11/25/2020
2020-11-16-10-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory11/20/2020Satish Jain
Yes
11/25/2020
2020-11-16-10-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain, CT D08 - Fontana Southern Regional Laboratory11/20/2020Satish Jain
Yes
11/25/2020Rap Gradation After Ignition
2020-11-16-10-10THIS TEST HAS BEEN SUPERSEDED.
CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Satish Jain/Dominic Montemayor, CT D08 - Fontana Southern Regional Laboratory11/20/2020Satish Jain
Yes
11/25/2020THIS TEST HAS BEEN SUPERSEDED.
Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-11-16-10-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-11-16-10-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-11-16-10-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-11-16-10-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-11-16-10-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-11-16-10-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-11-16-10-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-11-16-10-8 AASHTO T304-11 (Verified)
DIME Test ID: 2020-11-16-10-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-11-16-10-10 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-11-16-10-11 AASHTO T27-14 (Verified)
DIME Test ID: 2020-11-16-10-12 CTM 202-November 2011 (Verified)