Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-07-01-44

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214685
DEA: 024E46U4
EFIS: 0216000122
DIST-CO-RTE-PM02-LAS-36-6.0/14.6
Award Date05/08/2020
Closeout Date08/14/2023
Work DescriptionREPLACE BRIDGE, ROADWAY EXCAVATION, HMA, CLASS 2 AB AND DRAINAGE WORK.
Location DescriptionLASSEN COUNTY NEAR WESTWOOD FROM 1.3 MILES WEST OF GOODRICH CREEK BRIDGE TO 1.0 MILE WEST OF WILLARD CREEK ROAD
QA Service Level1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date07/01/2020 Sample Unique Key44
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/02/2020
Sample typeVerification A brief description of the sampleLime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 23.0 RAP
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byJoe Last name of sampler or witnessed byDelgado
Title of sampler Telephone number of sampler
Laboratory sample identificationD78501 Linked DIME Sample ID
The fabricator/manufacturer/facility nameWard Lake Plant Transportation Laboratory (TL) Number896801
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix NumberNot set

JMF Information

Verification IDJMF3513-2020-212 Date Created10/30/2020
JMF Submittal IDJMF3511-22-2020-301 JMF StatusSubmittal Rejected For Use
Producer Mix ID20-1278.120-0.75inch_HMA Rejected Date11/17/2020

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-07-01-44-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Ward Jenkins, CT D02 - Redding Northern Regional Laboratory09/10/2020Ward Jenkins
Yes
11/16/2020
2020-07-01-44-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory07/02/2020Ward Jenkins
Yes
11/16/2020
2020-07-01-44-3AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory07/03/2020Ward Jenkins
Yes
11/16/2020
2020-07-01-44-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory07/03/2020Ward Jenkins
Yes
11/16/2020
2020-07-01-44-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory07/03/2020Ward Jenkins
Yes
11/16/2020
2020-07-01-44-7AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/06/2020Ward Jenkins
Yes
11/16/2020

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-07-01-44-1 AASHTO T308-10 (Verified)
DIME Test ID: 2020-07-01-44-2 AASHTO T209-12 (Verified)
DIME Test ID: 2020-07-01-44-3 AASHTO T312-14 (Verified)
DIME Test ID: 2020-07-01-44-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2020-07-01-44-5 AASHTO T269-14 (Verified)
DIME Test ID: 2020-07-01-44-7 AASHTO T324-14 (Verified)