Owner Lab
- CT D02 - North Region Materials Lab
DIME Sample ID 2020-05-22-25
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 212866 DEA: 021H9704 EFIS: 0216000051 |
DIST-CO-RTE-PM | 02-TEH-36-12.6/13.1 |
Award Date | 11/25/2019 |
Closeout Date | 10/06/2020 |
Work Description | CURVE REALIGNMENT AND HMA PAVING. |
Location Description | TEHAMA COUNTY ABOUT 16 MILES EAST OF PLATINA FROM 2.3 MILES EAST TO 2.8 MILES EAST OF DRY CREEK BRIDGE |
QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
Sample Taken Date | 05/22/2020 |
Sample Unique Key | 25 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/22/2020 |
Sample type | Verification |
A brief description of the sample | Combined Untreated 1/2-inch Type G Aggregate |
The quantity of what the sample constitutes | JMF Verification |
From where was the sample collected | Source |
First name of sampler or witnessed by | Karen |
Last name of sampler or witnessed by | Spliethof |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | D78446F |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Shasta Ranch Aggregates - Anderson, CA |
Transportation Laboratory (TL) Number | 897709 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-45-0057 |
The fabricator's/manufacturer's product name for the sample | |
The fabricator/manufacturer designation for the sample | |
The plant number | |
A detailed description of where the material sample was collected | Lab-Batched from Sized Untreated Aggregate Stockpiles |
Where the material sample would have been placed if not sampled | |
Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | JMF 20-10-S1 |
Lot number | |
Sublot number | |
JMF Verification ID | JMF3513-2020-163 |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2020-05-22-25-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Ward Jenkins | CT D02 - North Region Materials Lab | 07/21/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-2 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Terry McCormick | CT D02 - North Region Materials Lab | 07/22/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-3 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Terry McCormick | CT D02 - North Region Materials Lab | 07/23/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-4 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Terry McCormick | CT D02 - North Region Materials Lab | 07/22/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-5 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Dennis Hickey | CT D02 - North Region Materials Lab | 07/23/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-6 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Ward Jenkins | CT D02 - North Region Materials Lab | 07/22/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-8 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Terry McCormick | CT D02 - North Region Materials Lab | 07/22/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-9 | AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index) | Terry McCormick | CT D02 - North Region Materials Lab | 07/22/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-10 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Terry McCormick | CT D02 - North Region Materials Lab | 07/22/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
2020-05-22-25-11 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Ward Jenkins | CT D02 - North Region Materials Lab | 07/22/2020 | Ward Jenkins | Yes | 07/23/2020 | | |
87310875628756387566875728757587577875898759287597