Sample Record

Owner Lab

  • CT D02 - North Region Materials Lab

DIME Sample ID 2020-05-21-38

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214725
DEA: 020J1304
EFIS: 0219000064
DIST-CO-RTE-PM02-LAS-139-43.0/53.0
Award Date04/10/2020
Closeout Date10/06/2020
Work DescriptionCOLD IN-PLACE RECYCLING AND PLACE HMA (TYPE A).
Location DescriptionLASSEN COUNTY ABOUT 42 MILES NORTH OF SUSANVILLE FROM 3.8 MILES NORTH OF SLATE CREEK TO 4.7 MILES SOUTH OF WILLOW CREEK RANCH ROAD
QA Service Level1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date05/21/2020 Sample Unique Key38
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/22/2020
Sample typeVerification A brief description of the sample1/2-inch Type A HMA (eq. Pg 64-28M) with 25.0 RAP, 1.1 Lime
The quantity of what the sample constitutesJMF Verification Renewal From where was the sample collectedManufacturer
First name of sampler or witnessed byJimmy Last name of sampler or witnessed byMontana
Title of sampler Telephone number of sampler
Laboratory sample identificationD78439 Linked DIME Sample ID
The fabricator/manufacturer/facility nameShaw Pit Facility Transportation Laboratory (TL) Number733195
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number JMF Verification ID JMF3513-2020-158

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-05-21-38-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)Ward JenkinsCT D02 - North Region Materials Lab05/23/2020Ward Jenkins
Yes
07/16/2020
2020-05-21-38-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Dennis HickeyCT D02 - North Region Materials Lab05/26/2020Ward Jenkins
Yes
07/16/2020
2020-05-21-38-3AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Darrell ValasekCT D02 - North Region Materials Lab05/26/2020Ward Jenkins
Yes
07/16/2020
2020-05-21-38-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Ward JenkinsCT D02 - North Region Materials Lab07/14/2020Ward Jenkins
Yes
07/16/2020
2020-05-21-38-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Darrell ValasekCT D02 - North Region Materials Lab05/27/2020Ward Jenkins
Yes
07/16/2020
2020-05-21-38-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)D. Valasek and T. McCormickCT D02 - North Region Materials Lab05/30/2020Ward Jenkins
Yes
07/16/2020
2020-05-21-38-7AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Dennis HickeyCT D02 - North Region Materials Lab05/27/2020Ward Jenkins
Yes
07/16/2020Nf = 23 867 passes, SIP = 10 912 passes.