Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2020-04-20-12

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212244
DEA: 044G8404
EFIS: 0413000051
DIST-CO-RTE-PM04-NAP-128-20.1/20.4
Award Date02/19/2019
Closeout Date06/27/2023
Work DescriptionREPLACE CAPELL CREEK BRIDGE
Location DescriptionNAPA COUNTY ABOUT 15 MILES EAST OF RUTHERFORD FROM 1.1 MILES EAST OF KNOXVILLE ROAD TO 0.3 MILE WEST OF CAPELL VALLEY CREST
QA Service Level1 (Verified on 05/20/2017)

Sample Information

Sample Taken Date04/20/2020 Sample Unique Key12
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/22/2020
Sample typeQuality Assurance A brief description of the sampleA325 Bolt
The quantity of what the sample constitutes6 From where was the sample collectedJob Site
First name of sampler or witnessed byMatt Last name of sampler or witnessed byAbel
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameNucor Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s) Nut Mfg. Lot Number(s)
Washer Mfg. Lot Number(s) Bolt SpecificationF3125
Bolt Length(s)3.5 Nut SpecificationUnknow
Washer SpecificationUnknow FinishA2329
Diameter/Size1.250 Bolt Mfg. Lot NumberAB584
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-04-20-12-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020bewing
Yes
04/23/2020Nut Proof
2020-04-20-12-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020bewing
Yes
04/23/2020Nut Proof
2020-04-20-12-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020bewing
Yes
04/23/2020Nut Proof
2020-04-20-12-4ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020Fred Saylor
Yes
04/23/2020
2020-04-20-12-5ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020Fred Saylor
Yes
04/23/2020
2020-04-20-12-6ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020Fred Saylor
Yes
04/23/2020
2020-04-20-12-7ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020Fred Saylor
Yes
04/23/2020
2020-04-20-12-8ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020Fred Saylor
Yes
04/23/2020
2020-04-20-12-9ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020Fred Saylor
Yes
04/23/2020
2020-04-20-12-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory04/23/2020Fred Saylor
Yes
04/23/2020

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-04-20-12-1 ASTM F606-14a (Verified)
DIME Test ID: 2020-04-20-12-2 ASTM F606-14a (Verified)
DIME Test ID: 2020-04-20-12-3 ASTM F606-14a (Verified)
DIME Test ID: 2020-04-20-12-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-04-20-12-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-04-20-12-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-04-20-12-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-04-20-12-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-04-20-12-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-04-20-12-10 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-11 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-12 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-13 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-14 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-15 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-16 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-17 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-18 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-19 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-20 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-21 ASTM B499-14 (Verified)
DIME Test ID: 2020-04-20-12-22 ASTM E18-15 (Verified)
DIME Test ID: 2020-04-20-12-23 ASTM E18-15 (Verified)
DIME Test ID: 2020-04-20-12-24 ASTM E18-15 (Verified)
DIME Test ID: 2020-04-20-12-25 ASTM E18-15 (Verified)