DIME - Sample Record for DIME Sample ID 2020-01-24-17

DIME » All Projects » Project - DEA: 080F6314 » Sample 2020-01-24-17 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-01-24-17

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 210489 DEA: 080F6314 EFIS: 0813000220
DIST-CO-RTE-PM	08-SBD-395-11.2/16.6
Award Date	Not set
Closeout Date	08/19/2021
Work Description	The scope of project is widening approximately 5 miles of US 395 from two lanes to four lanes, repave existing lanes, modify five signals, upgrade ADA access, add turn lanes, add sound walls, and extend bridge
Location Description	Project Limits are PM 11.2 from 16.6 and US 395.
QA Service Level	2 (Verified on 01/03/2019)

Sample Information

Sample Taken Date	01/24/2020	Sample Unique Key	17
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	01/29/2020
Sample type	Verification	A brief description of the sample	1 HMA-A-SP R15
The quantity of what the sample constitutes	JMF 16 Bags	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Blue Diamond Victorville	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0119A-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Blue Diamond-Victorville	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA or name of Pit)	91-36-0106::WHITE MOUNTAIN QUARRY
The fabricator's/manufacturer's product name for the sample	1 HMA-A-SP R15	The fabricator/manufacturer designation for the sample	300222-WM
The plant number	Unknown	A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name	Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-01-24-17-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Husni Ankir , Michael Magana	CT D08 - Fontana Southern Regional Laboratory	02/05/2020	Michael Magana	Yes	03/17/2020	Lime Treated Aggregate Gradation
2020-01-24-17-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020
2020-01-24-17-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020
2020-01-24-17-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Danilo Ferrer	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020
2020-01-24-17-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Larry Diaz	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020
2020-01-24-17-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Satish Jain	CT D08 - Fontana Southern Regional Laboratory	02/03/2020	Michael Magana	Yes	03/17/2020
2020-01-24-17-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020
2020-01-24-17-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020
2020-01-24-17-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020	RAP Gradation After Ignition Oven
2020-01-24-17-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Husni Ankir, Satsh Jain	CT D08 - Fontana Southern Regional Laboratory	02/04/2020	Michael Magana	Yes	03/17/2020	Combine Lime Treated Aggregate/RAP Gradation w/Correlation Factors

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-01-24-17-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-01-24-17-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-01-24-17-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-01-24-17-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-01-24-17-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-01-24-17-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-01-24-17-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-01-24-17-8 AASHTO T304-11 (Verified)
DIME Test ID: 2020-01-24-17-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-01-24-17-10 CTM 202-November 2011 (Verified)