Owner Labs
- CT HQ - Sacramento Chemistry Laboratory
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-11-04-3
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 88888 DEA: STOCK EFIS: STOCK |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 11/04/2019 |
Sample Unique Key | 3 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 11/08/2019 |
Sample type | Quality Assurance |
A brief description of the sample | 2.5" joint seal |
The quantity of what the sample constitutes | 500 ft |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Dave |
Last name of sampler or witnessed by | Simon |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | DS Brown |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal |
Mfg. Lot Number(s) | 0619388 |
Manufacturer(s) | DS Brown |
Temperature | 72 |
Humidity | 50 |
Comments | Unknown |
Joint Seal Size | 2.5" |
---|
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-11-04-3-1 | CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/18/2019 | Steven Paine | Yes | 11/19/2019 | | |
2019-11-04-3-2 | ASTM D2628-91-re11-low: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements (Low Temp Recovery) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/13/2019 | Rheanna Andelin | Yes | 11/19/2019 | | |
2019-11-04-3-3 | ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/14/2019 | Steven Paine | Yes | 11/19/2019 | | |
2019-11-04-3-4 | ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/18/2019 | spaine | Yes | 11/19/2019 | | |
2019-11-04-3-5 | ASTM D471-15a: Standard Test Method for Rubber Property - Effect of Liquids | Mariano Pontillas | CT HQ - Sacramento Chemistry Laboratory | 11/18/2019 | Mariano Pontillas | Yes | 11/18/2019 | | |
2019-11-04-3-6 | SMTL BILST-06: (Neoprene Verification) Bilstein Test | Mariano Pontillas | CT HQ - Sacramento Chemistry Laboratory | 11/18/2019 | Mariano Pontillas | Yes | 11/18/2019 | | |
2019-11-04-3-7 | ASTM D2628-91-re11-high: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements (High Temp Recovery) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/15/2019 | Steven Paine | Yes | 11/19/2019 | | |
71960717157183471956720047200571961