Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2019-09-20-7
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214032 DEA: 09378604 EFIS: 0918000080 |
DIST-CO-RTE-PM | 09-KER-58-R128.9/R135.1 |
Award Date | 05/13/2019 |
Closeout Date | 12/02/2019 |
Work Description | COLD PLANE AC PAVEMENT AND PLACE HMA. |
Location Description | KERN COUNTY NEAR BORON FROM 1.3 MILES EAST OF CALIFORNIA CITY BOULEVARD TO 1.3 MILES WEST OF TWENTY MULE TEAM OVERCROSSING |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 09/20/2019 |
Sample Unique Key | 7 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/24/2019 |
Sample type | Verification |
A brief description of the sample | 3/4 HMA-A-SP R25 |
The quantity of what the sample constitutes | 10k Milestone 15 bags |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Tim |
Last name of sampler or witnessed by | Reyes |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | 0560A-19 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Granite Little Rock |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-19-0008::LITTLEROCK |
The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R25 |
The fabricator/manufacturer designation for the sample | 1468 |
The plant number | Unknown |
A detailed description of where the material sample was collected | Belt Cut at Granite Little Rock Plant |
Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown |
Lot number | Unknown |
Sublot number | Unknown |
JMF Verification ID | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-09-20-7-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Larry Diaz, Satish Jain | CT - Southern Regional Laboratory | 09/25/2019 | Michael Magana | Yes | 10/07/2019 | Lime Treated Aggregate | |
2019-09-20-7-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 09/26/2019 | Michael Magana | Yes | 10/07/2019 | | |
2019-09-20-7-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz | CT - Southern Regional Laboratory | 09/27/2019 | Michael Magana | Yes | 10/07/2019 | | |
2019-09-20-7-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Danilo Ferrer | CT - Southern Regional Laboratory | 09/26/2019 | Michael Magana | Yes | 10/07/2019 | | |
2019-09-20-7-5 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Husni Ankir | CT - Southern Regional Laboratory | 09/27/2019 | Michael Magana | Yes | 10/07/2019 | | |
2019-09-20-7-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Danilo Ferrer | CT - Southern Regional Laboratory | 09/25/2019 | Michael Magana | Yes | 10/07/2019 | | |
2019-09-20-7-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 09/26/2019 | Michael Magana | Yes | 10/07/2019 | | |
2019-09-20-7-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 09/26/2019 | Michael Magana | Yes | 10/07/2019 | | |
2019-09-20-7-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain | CT - Southern Regional Laboratory | 09/26/2019 | Michael Magana | Yes | 10/07/2019 | RAP Gradation After Ignition Oven | |
2019-09-20-7-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz, Satish Jain | CT - Southern Regional Laboratory | 09/25/2019 | Michael Magana | Yes | 10/07/2019 | Combined Lime Treated Aggregate/RAP Gradation w/Correlation Factors Applied | |
68961689626896368964689656896668967689686896968970