Sample Record

Owner Lab

  • CT HQ - QASI Sacramento Field Office

DIME Sample ID 2019-08-08-21

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213261
DEA: 071XH004
EFIS: 0718000239
DIST-CO-RTE-PM07-LA-47-.86, 0.86, 0.86
Award Date03/20/2018
Closeout Date06/03/2020
Work DescriptionRemove and replace the two (2) long finger joint assemblies at Bents 11 and 12 and repair the elevators in both towers
Location DescriptionNot set
QA Service Level1 (Verified on 06/08/2018)

Sample Information

Sample Taken Date08/08/2019 Sample Unique Key21
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/09/2019
Sample typeAcceptance A brief description of the sample7/8 - 9 x 7 A325
The quantity of what the sample constitutes110 From where was the sample collectedFabricator
First name of sampler or witnessed byJamie Last name of sampler or witnessed byDoe
Title of samplerQA Inspector Telephone number of sampler916-838-4505
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameCK Johnson Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormS50-018-19 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)812525R
Heat Number(s)10550960, 21807850, DL18101099 Nut Mfg. Lot Number(s)406805A
Washer Mfg. Lot Number(s)D5899 Bolt SpecificationA325
Bolt Length(s)7" Nut SpecificationA563
Washer SpecificationF436 FinishHDG
Diameter/Size7/8 - 9 Bolt Mfg. Lot Number812525
Rocap Test Requirement(s)Yes Lubricant Requirements(s)Yes

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-08-08-21-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory08/20/2019spaine
Yes
08/22/2019
2019-08-08-21-2ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-3ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-5ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-6ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-7ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-8ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-9ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019
2019-08-08-21-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory08/21/2019Steven Paine
Yes
08/22/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-08-08-21-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-08-21-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-08-21-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-08-21-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-08-21-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-08-21-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-08-21-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-08-21-8 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-08-21-17 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-08-21-18 ASTM E18-15 (Verified)