Owner Lab
- CT QASI - Sacramento Field Laboratory
DIME Sample ID 2019-08-08-20
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213261
DEA: 071XH004
EFIS: 0718000239 |
|---|
| DIST-CO-RTE-PM | 07-LA-47-.86 |
|---|
| Award Date | 03/20/2018 |
|---|
| Closeout Date | 06/03/2020 |
|---|
| Work Description | Remove and replace the two (2) long finger joint assemblies at Bents 11 and 12 and repair the elevators in both towers |
|---|
| Location Description | Not set |
|---|
| QA Service Level | 1 (Verified on 06/08/2018) |
|---|
Sample Information
| Sample Taken Date | 08/08/2019 |
Sample Unique Key | 20 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 08/09/2019 |
|---|
| Sample type | Acceptance |
A brief description of the sample | 7/8 - 9 x 5-1/2 A325 |
|---|
| The quantity of what the sample constitutes | 357 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Jamie |
Last name of sampler or witnessed by | Doe |
|---|
| Title of sampler | QA Inspector |
Telephone number of sampler | 916-838-4505 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | CK Johnson |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | S50-017-19 |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 363345AR |
|---|
| Heat Number(s) | NF15101698, 180231, DL18101099 |
Nut Mfg. Lot Number(s) | 406805A |
|---|
| Washer Mfg. Lot Number(s) | 317601 |
Bolt Specification | A325 |
|---|
| Bolt Length(s) | 5-1/2" |
Nut Specification | A563 |
|---|
| Washer Specification | F436 |
Finish | HDG |
|---|
| Diameter/Size | 7/8 - 9 |
Bolt Mfg. Lot Number | 363345A |
|---|
| Rocap Test Requirement(s) | Yes |
Lubricant Requirements(s) | Yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-08-08-20-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/20/2019 | spaine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/20/2019 | spaine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-7 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
| 2019-08-08-20-10 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 08/21/2019 | Steven Paine | Yes | 08/21/2019 | |
|
66325663266644366444664456644666447664496645066451
