Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2019-06-29-2
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213603
DEA: 07301504
EFIS: 0714000020 |
|---|
| DIST-CO-RTE-PM | 07-LA-1,10-R34.6/35.2,R2.1/18.4 |
|---|
| Award Date | 11/19/2018 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | REPLACING CONCRETE AND AC PAVEMENT |
|---|
| Location Description | LOS ANGELES COUNTY IN SANTA MONICA AND LOS ANGELES ON ROUTE 1 FROM 0.1 MILE WEST OF MAIN STREET OVERCROSSING TO ROUTE 1/10 SEPARATION AND ON ROUTE 10 FROM ROUTE 1/10 SEPARATION TO ROUTE 5/10 SEPARATION AND AT ROUTE 10/110 SEPARATION |
|---|
| QA Service Level | 1 (Verified on 07/26/2019) |
|---|
Sample Information
| Sample Taken Date | 06/29/2019 |
Sample Unique Key | 2 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 07/03/2019 |
|---|
| Sample type | Verification |
A brief description of the sample | 1/2 HMA-A-SP R15 |
|---|
| The quantity of what the sample constitutes | JMF 6 bags |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | Vulcan Irwindale |
Last name of sampler or witnessed by | QC |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | 0401A-19 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Fish Canyon - Irwindale |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-19-0035::FISH CANYON QUARRY |
|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 HMA-A-SP R15 |
The fabricator/manufacturer designation for the sample | 320819A IRW LTR |
|---|
| The plant number | Unknown |
A detailed description of where the material sample was collected | Belt Cut at Plant |
|---|
| Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 1/2 inch |
|---|
| The concrete mix design number | Unknown |
Lot number | Unknown |
|---|
| Sublot number | Unknown |
JMF Verification ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-06-29-2-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Danilo Ferrer | CT - Southern Regional Laboratory | 07/05/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 07/11/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz | CT - Southern Regional Laboratory | 07/07/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Danilo Ferrer | CT - Southern Regional Laboratory | 07/10/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-5 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Danilo Ferrer | CT - Southern Regional Laboratory | 07/05/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Satish Jain | CT - Southern Regional Laboratory | 07/08/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 07/11/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 07/19/2019 | Michael Magana | Yes | 08/22/2019 | |
|
| 2019-06-29-2-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 07/18/2019 | Michael Magana | Yes | 08/22/2019 | RAP Gradation After Ignition Oven |
|
| 2019-06-29-2-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 07/18/2019 | Michael Magana | Yes | 08/22/2019 | Combined Virgin Aggregate/RAP Gradation w/Correlation Factors Applied |
|
64102641036410464105641066410764108641096411064111
