DIME - Sample Record for DIME Sample ID 2019-05-13-15

DIME » All Projects » Project - DEA: 020H7604 » Sample 2019-05-13-15 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2019-05-13-15

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212753 DEA: 020H7604 EFIS: 0215000086
DIST-CO-RTE-PM	02-LAS,PLU-VAR-VAR
Award Date	03/28/2019
Closeout Date	09/02/2020
Work Description	FULL DEPTH RECLAMATION AND DRAINAGE REHABILITATION
Location Description	LASSEN AND PLUMAS COUNTIES AT AND NEAR CHILCOOT FROM 0.9 MILE WEST OF SUMMIT SCHOOL DRIVE TO 0.7 MILE EAST OF ROUTE 395
QA Service Level	1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date	05/13/2019	Sample Unique Key	15
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/14/2019
Sample type	Verification	A brief description of the sample	3/4-inch Type A HMA (eq. PG 64-28 M)
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Derrick	Last name of sampler or witnessed by	Curry
Title of sampler		Telephone number of sampler
Laboratory sample identification	D77883	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Ward Lake Plant	Transportation Laboratory (TL) Number	001352
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	3/4 inch	Lot number	0
Sublot number	0	HMA Mix Number	Not set

JMF Information

Verification ID	JMF3513-2019-69	Date Created	06/19/2019
JMF Submittal ID	JMF3511-227-2019-85	JMF Status	Submittal Authorized For Use
Producer Mix ID	19-1278.106	Authorized Date	07/01/2019

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2019-05-13-15-1	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	06/21/2019	Ward Jenkins	Yes	06/21/2019
2019-05-13-15-2	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	06/06/2019	Ward Jenkins	Yes	06/20/2019
2019-05-13-15-3	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Arthur Mills, CT D02 - Redding Northern Regional Laboratory	05/15/2019	Ward Jenkins	Yes	06/20/2019
2019-05-13-15-4	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Arthur Mills, CT D02 - Redding Northern Regional Laboratory	05/16/2019	Ward Jenkins	Yes	06/20/2019
2019-05-13-15-5	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Terry McCormick and D. Valasek, CT D02 - Redding Northern Regional Laboratory	06/13/2019	Ward Jenkins	Yes	06/20/2019
2019-05-13-15-6	AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)	D. Valasek and T. McCormick, CT D02 - Redding Northern Regional Laboratory	06/09/2019	Ward Jenkins	Yes	06/20/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-05-13-15-1 AASHTO T308-10 (Verified)
DIME Test ID: 2019-05-13-15-2 AASHTO T209-12 (Verified)
DIME Test ID: 2019-05-13-15-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2019-05-13-15-4 AASHTO T269-14 (Verified)
DIME Test ID: 2019-05-13-15-5 AASHTO T283-14 (Verified)
DIME Test ID: 2019-05-13-15-6 AASHTO T324-14 (Verified)