Sample Record

Owner Lab

  • CT D02 - North Region Materials Lab

DIME Sample ID 2019-05-13-11

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212753
DEA: 020H7604
EFIS: 0215000086
DIST-CO-RTE-PM02-LAS,PLU-VAR-VAR
Award Date03/28/2019
Closeout Date09/02/2020
Work DescriptionFULL DEPTH RECLAMATION AND DRAINAGE REHABILITATION
Location DescriptionLASSEN AND PLUMAS COUNTIES AT AND NEAR CHILCOOT FROM 0.9 MILE WEST OF SUMMIT SCHOOL DRIVE TO 0.7 MILE EAST OF ROUTE 395
QA Service Level1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date05/13/2019 Sample Unique Key11
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/14/2019
Sample typeVerification A brief description of the sampleUntreated Virgin 3/4-inch Type A Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byDerrick Last name of sampler or witnessed byCurry
Title of sampler Telephone number of sampler
Laboratory sample identificationD77885F Linked DIME Sample ID
The fabricator/manufacturer/facility nameWard Lake Plant Transportation Laboratory (TL) Number001353
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-18-0008::WARD LAKE PIT
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sample19-1278.106
The plant numberUnknown A detailed description of where the material sample was collectedLab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberJMF 19-10-S1 Lot number0
Sublot number0 JMF Verification ID JMF3513-2019-69

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-05-13-11-1CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Terry McCormickCT D02 - North Region Materials Lab06/24/2019Ward Jenkins
Yes
06/24/2019
2019-05-13-11-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Arthur MillsCT D02 - North Region Materials Lab06/20/2019Ward Jenkins
Yes
06/24/2019
2019-05-13-11-3THIS TEST HAS BEEN SUPERSEDED.
AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Arthur MillsCT D02 - North Region Materials Lab06/21/2019Ward Jenkins
Yes
06/24/2019THIS TEST HAS BEEN SUPERSEDED.
2019-05-13-11-4THIS TEST HAS BEEN SUPERSEDED.
AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Dennis HickeyCT D02 - North Region Materials Lab06/24/2019Ward Jenkins
Yes
06/24/2019THIS TEST HAS BEEN SUPERSEDED.
2019-05-13-11-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Dennis HickeyCT D02 - North Region Materials Lab06/20/2019Ward Jenkins
Yes
06/24/2019
2019-05-13-11-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Colt SweenyCT D02 - North Region Materials Lab06/21/2019Ward Jenkins
Yes
06/24/2019
2019-05-13-11-7AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Arthur MillsCT D02 - North Region Materials Lab06/21/2019Ward Jenkins
Yes
06/24/2019
2019-05-13-11-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Arthur MillsCT D02 - North Region Materials Lab06/24/2019Ward Jenkins
Yes
06/24/2019
2019-05-13-11-9ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Arthur MillsCT D02 - North Region Materials Lab06/20/2019Ward Jenkins
Yes
06/24/2019
2019-05-13-11-10THIS TEST HAS BEEN SUPERSEDED.
AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Arthur MillsCT D02 - North Region Materials Lab06/25/2019Ward Jenkins
Yes
06/26/2019THIS TEST HAS BEEN SUPERSEDED.