DIME - Sample Record for DIME Sample ID 2019-04-29-20

DIME » All Projects » Project - DEA: 024H2004 » Sample 2019-04-29-20 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2019-04-29-20

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213720 DEA: 024H2004 EFIS: 0218000094
DIST-CO-RTE-PM	02-SHA-89-26.3/29.2
Award Date	12/19/2018
Closeout Date	08/06/2019
Work Description	PAVEMENT OVERLAY
Location Description	SHASTA COUNTY ABOUT 10 MILES NORTH OF BURNEY FROM 0.3 MILE NORTH OF CLARK CREEK ROAD TO LAKE BRITTON BRIDGE
QA Service Level	1 (Verified on 01/04/2019)

Sample Information

Sample Taken Date	04/29/2019	Sample Unique Key	20
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/30/2019
Sample type	Verification	A brief description of the sample	Untreated Virgin 1/2-inch Type A Aggregate
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Source
First name of sampler or witnessed by	Cindy	Last name of sampler or witnessed by	Bryant
Title of sampler	TET	Telephone number of sampler
Laboratory sample identification	D77860F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Shaw Pit	Transportation Laboratory (TL) Number	827788
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-25-0008::SHAW PIT
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	19-1278.105B
The plant number	Unknown	A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	JMF 19-05-S2	Lot number	0
Sublot number	0	Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2019-65	Date Created	05/31/2019
JMF Submittal ID	JMF3511-22-2019-96	JMF Status	Submittal Authorized For Use
Producer Mix ID	19-1278.105B	Authorized Date	06/07/2019

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2019-04-29-20-1	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	06/06/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	06/03/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	06/04/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	06/06/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	06/04/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-7	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	06/05/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-8	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	Dennis Hickey and D. Valasek, CT D02 - Redding Northern Regional Laboratory	06/05/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-9	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	06/06/2019	Ward Jenkins	Yes	06/06/2019
2019-04-29-20-10	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	06/05/2019	Ward Jenkins	Yes	06/06/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-04-29-20-1 CTM 204-June 2010 (Verified)
DIME Test ID: 2019-04-29-20-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2019-04-29-20-3 AASHTO T85-13 (Verified)
DIME Test ID: 2019-04-29-20-4 AASHTO T84-14 (Verified)
DIME Test ID: 2019-04-29-20-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2019-04-29-20-7 AASHTO T176-08 (Verified)
DIME Test ID: 2019-04-29-20-8 AASHTO T210-15 (Verified)
DIME Test ID: 2019-04-29-20-9 AASHTO T304-11 (Verified)
DIME Test ID: 2019-04-29-20-10 ASTM D4791-10 (Verified)