Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2019-04-30-6
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 213306 DEA: 07303404 EFIS: 0714000006 |
DIST-CO-RTE-PM | 07-VEN-33-0.0/6.3 |
Award Date | 06/18/2018 |
Closeout Date | 05/10/2021 |
Work Description | COLD PLANE AC PVMT, PLACE RUBBERIZED AC (TYPE G), AND REPLACE PCC PVMT |
Location Description | VENTURA COUNTY IN AND NEAR VENTURA FROM ROUTE 33/101 SEPARATION TO 0.1 MILE SOUTH OF PARK VIEW DRIVE |
QA Service Level | 1 (Verified on 12/09/2020) |
Sample Information
Sample Taken Date | 04/30/2019 |
Sample Unique Key | 6 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/03/2019 |
Sample type | Verification |
A brief description of the sample | 3/4 HMA-A-SP |
The quantity of what the sample constitutes | PSE 4 bags |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Vulcan Materials |
Last name of sampler or witnessed by | QC |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | 0260A-19 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Sheldon, Big Rock Creek, Palmdale |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-19-0017, 91-19-0019, 09-91-0021 |
The fabricator's/manufacturer's product name for the sample | Unknown |
The fabricator/manufacturer designation for the sample | 220831 SAT VLO |
The plant number | Unknown |
A detailed description of where the material sample was collected | Manufacturer |
Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown |
Lot number | Unknown |
Sublot number | Unknown |
JMF Verification ID | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-04-30-6-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Larry Diaz | CT - Southern Regional Laboratory | 05/04/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 05/08/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz | CT - Southern Regional Laboratory | 05/04/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Larry Diaz | CT - Southern Regional Laboratory | 05/11/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-5 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Larry Diaz | CT - Southern Regional Laboratory | 05/08/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Husni Ankir | CT - Southern Regional Laboratory | 05/04/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 05/08/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 05/08/2019 | Michael Magana | Yes | 06/06/2019 | | |
2019-04-30-6-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain | CT - Southern Regional Laboratory | 05/06/2019 | Michael Magana | Yes | 06/06/2019 | RAP Gradation After Ignition Oven | |
2019-04-30-6-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain | CT - Southern Regional Laboratory | 05/08/2019 | Michael Magana | Yes | 06/06/2019 | Combined Virgin Aggregate/RAP w/Correlation Factors Applied | |
59834598365983859839598425984359845598465984859849