DIME - Sample Record for DIME Sample ID 2019-04-15-8

DIME » All Projects » Project - DEA: 08388524 » Sample 2019-04-15-8 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2019-04-15-8

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213651 DEA: 08388524 EFIS: 0812000124
DIST-CO-RTE-PM	08-SBD-330-32.3/32.6,33.4/33.8
Award Date	11/28/2018
Closeout Date	10/23/2020
Work Description	REPLACE BRIDGE RAILS AND APPROACH RAILS.
Location Description	SAN BERNARDINO COUNTY FROM 0.2 MILE SOUTH TO 0.1 MILE NORTH OF CITY CREEK BRIDGE AND FROM 0.3 MILE SOUTH TO 0.1 MILE NORTH OF EAST CITY CREEK BRIDGE
QA Service Level	1 (Verified on 02/04/2019)

Sample Information

Sample Taken Date	04/15/2019	Sample Unique Key	8
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/18/2019
Sample type	Verification	A brief description of the sample	1/2 HMA-A-SP
The quantity of what the sample constitutes	JMF 6 bags	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Vulcan	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0240A-19	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan - Corona, Pacific Clay Products	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0027::CORONA QUARRY
The fabricator's/manufacturer's product name for the sample	1/2 HMA-A-SP	The fabricator/manufacturer designation for the sample	324108 CORD SJR
The plant number	Unknown	A detailed description of where the material sample was collected	Manufacturer
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-04-15-8-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	04/23/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	04/29/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	04/24/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	04/24/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	04/25/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Husni Ankir, CT D08 - Fontana Southern Regional Laboratory	04/29/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	04/29/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	04/29/2019	Michael Magana	Yes	05/07/2019
2019-04-15-8-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	04/26/2019	Michael Magana	Yes	05/07/2019	RAP Gradation After Ignition Oven
2019-04-15-8-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	04/26/2019	Michael Magana	Yes	05/07/2019	Combined Virgin Aggregate/RAP Gradation w/Correlation Factors Applied

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-04-15-8-1 AASHTO T27-14 (Verified)
DIME Test ID: 2019-04-15-8-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2019-04-15-8-3 AASHTO T85-13 (Verified)
DIME Test ID: 2019-04-15-8-4 AASHTO T84-14 (Verified)
DIME Test ID: 2019-04-15-8-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2019-04-15-8-6 AASHTO T176-08 (Verified)
DIME Test ID: 2019-04-15-8-7 ASTM D4791-10 (Verified)
DIME Test ID: 2019-04-15-8-8 AASHTO T304-11 (Verified)
DIME Test ID: 2019-04-15-8-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2019-04-15-8-10 CTM 202-November 2011 (Verified)