Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2019-04-15-7

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213651
DEA: 08388524
EFIS: 0812000124
DIST-CO-RTE-PM08-SBD-330-32.3/32.6,33.4/33.8
Award Date11/28/2018
Closeout Date10/23/2020
Work DescriptionREPLACE BRIDGE RAILS AND APPROACH RAILS.
Location DescriptionSAN BERNARDINO COUNTY FROM 0.2 MILE SOUTH TO 0.1 MILE NORTH OF CITY CREEK BRIDGE AND FROM 0.3 MILE SOUTH TO 0.1 MILE NORTH OF EAST CITY CREEK BRIDGE
QA Service Level1 (Verified on 02/04/2019)

Sample Information

Sample Taken Date04/15/2019 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/18/2019
Sample typeVerification A brief description of the sample3/8 HMA-A-SP
The quantity of what the sample constitutesJMF 6 bags From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0239A-19 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan Materials - Corona Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0027::CORONA QUARRY
The fabricator's/manufacturer's product name for the sample3/8 HMA-A-SP The fabricator/manufacturer designation for the sample42103
The plant numberUnknown A detailed description of where the material sample was collectedManufacturer
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/8 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-04-15-7-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory04/22/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory04/25/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory04/23/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory04/23/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Michael Magana, CT D08 - Fontana Southern Regional Laboratory04/24/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory04/23/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory04/25/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory04/25/2019Michael Magana
Yes
05/07/2019
2019-04-15-7-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesKiet Phan, CT D08 - Fontana Southern Regional Laboratory04/25/2019Michael Magana
Yes
05/04/2019RAP Gradation After Ignition Oven
2019-04-15-7-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesEdmond Jabbour, CT D08 - Fontana Southern Regional Laboratory04/25/2019Michael Magana
Yes
05/04/2019Combined Virgin/RAP Gradation w/Correlation Factor Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-04-15-7-1 AASHTO T27-14 (Verified)
DIME Test ID: 2019-04-15-7-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2019-04-15-7-3 AASHTO T85-13 (Verified)
DIME Test ID: 2019-04-15-7-4 AASHTO T84-14 (Verified)
DIME Test ID: 2019-04-15-7-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2019-04-15-7-6 AASHTO T176-08 (Verified)
DIME Test ID: 2019-04-15-7-7 ASTM D4791-10 (Verified)
DIME Test ID: 2019-04-15-7-8 AASHTO T304-11 (Verified)
DIME Test ID: 2019-04-15-7-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2019-04-15-7-10 CTM 202-November 2011 (Verified)