Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-03-27-19

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date03/27/2019 Sample Unique Key19
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/12/2019
Sample typeQuality Assurance A brief description of the sampleF1554 anchor rods
The quantity of what the sample constitutes3 From where was the sample collectedManufacturer
First name of sampler or witnessed byAndrew Last name of sampler or witnessed byBellon
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameASI Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)6213649004 6214399712 6214815409 Nut Mfg. Lot Number(s)409160A DDXO DDXS
Washer Mfg. Lot Number(s)0418826 0917626 1117687 Bolt SpecificationF1554 GR 55
Bolt Length(s)18" 30" 32" Nut SpecificationA194 A563
Washer SpecificationF436 HDG FinishHDG
Diameter/Size1" 1.75" 2" Bolt Mfg. Lot Number
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-03-27-19-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Fred, CT HQ - Sacramento Structural Materials Testing Laboratory04/16/2019Fred
Yes
05/03/2019Nut Proof Load
2019-03-27-19-2ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steve
Yes
05/03/2019
2019-03-27-19-3ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steve
Yes
05/03/2019
2019-03-27-19-4ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steve
Yes
05/03/2019
2019-03-27-19-5ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steve
Yes
05/03/2019
2019-03-27-19-6ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steve
Yes
05/03/2019
2019-03-27-19-7ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steve
Yes
05/03/2019
2019-03-27-19-8ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steven Paine
Yes
05/03/2019
2019-03-27-19-9ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steven Paine
Yes
05/03/2019
2019-03-27-19-10ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/17/2019Steven Paine
Yes
05/03/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-03-27-19-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-03-27-19-2 ASTM A370-15 (Verified)
DIME Test ID: 2019-03-27-19-3 ASTM A370-15 (Verified)
DIME Test ID: 2019-03-27-19-4 ASTM A370-15 (Verified)
DIME Test ID: 2019-03-27-19-5 ASTM A370-15 (Verified)
DIME Test ID: 2019-03-27-19-6 ASTM A370-15 (Verified)
DIME Test ID: 2019-03-27-19-7 ASTM A370-15 (Verified)
DIME Test ID: 2019-03-27-19-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-27-19-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-27-19-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-27-19-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-18 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-19 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-27-19-20 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-27-19-21 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-27-19-22 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-27-19-23 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-27-19-24 ASTM E18-15 (Verified)