Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2019-03-25-18
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213691
DEA: 074W2904
EFIS: 0718000114 |
|---|
| DIST-CO-RTE-PM | 07-VEN-118-0.4/11.0 |
|---|
| Award Date | 12/04/2018 |
|---|
| Closeout Date | 02/20/2020 |
|---|
| Work Description | REPLACE ASPHALT CONCRETE SURFACING AND APPLY SLURRY SEAL COAT. |
|---|
| Location Description | VENTURA COUNTY IN VENTURA FROM 0.2 MILE WEST OF ROUTE 118/126 SEPARATION TO ROUTE 34 |
|---|
| QA Service Level | 1 (Verified on 02/20/2020) |
|---|
Sample Information
| Sample Taken Date | 03/25/2019 |
Sample Unique Key | 18 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 03/27/2019 |
|---|
| Sample type | Verification |
A brief description of the sample | 3/4 HMA-A-SP |
|---|
| The quantity of what the sample constitutes | PSE 4 bags |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | Vulcan Materials |
Last name of sampler or witnessed by | Vulcan Materials |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | 0203A-19 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Sheldon Boulevard Big Rock Creek |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-19-0017::SHELDON |
|---|
| The fabricator's/manufacturer's product name for the sample | 220831 |
The fabricator/manufacturer designation for the sample | Unknown |
|---|
| The plant number | Unknown |
A detailed description of where the material sample was collected | Manufaturer |
|---|
| Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
|---|
| The concrete mix design number | Unknown |
Lot number | Unknown |
|---|
| Sublot number | Unknown |
JMF Verification ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-03-25-18-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Sebastian Ferrer | CT - Southern Regional Laboratory | 03/28/2019 | Michael Magana | Yes | 05/15/2019 | |
|
| 2019-03-25-18-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain | CT - Southern Regional Laboratory | 04/02/2019 | Michael Magana | Yes | 04/30/2019 | Rap Gradation after Ignition Oven |
|
| 2019-03-25-18-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz | CT - Southern Regional Laboratory | 03/29/2019 | Michael Magana | Yes | 05/07/2019 | |
|
| 2019-03-25-18-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Sebastian Ferrer | CT - Southern Regional Laboratory | 03/29/2019 | Michael Magana | Yes | 05/07/2019 | |
|
| 2019-03-25-18-5 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 04/02/2019 | Michael Magana | Yes | 04/30/2019 | |
|
| 2019-03-25-18-6 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Larry Diaz | CT - Southern Regional Laboratory | 04/04/2019 | Michael Magana | Yes | 04/30/2019 | |
|
| 2019-03-25-18-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 04/02/2019 | Michael Magana | Yes | 04/30/2019 | |
|
| 2019-03-25-18-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 04/02/2019 | Michael Magana | Yes | 04/30/2019 | |
|
| 2019-03-25-18-9 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Husni Ankir | CT - Southern Regional Laboratory | 03/29/2019 | Michael Magana | Yes | 05/07/2019 | |
|
| 2019-03-25-18-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain | CT - Southern Regional Laboratory | 04/02/2019 | Michael Magana | Yes | 04/30/2019 | Combined Gradation of Blended Virgin/Rap w/Correlation Applied |
|
58184581935818558186581875818858190581915819258195
