DIME - Sample Record for DIME Sample ID 2019-03-07-2

DIME » All Projects » Project - DEA: 042Q9804 » Sample 2019-03-07-2 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2019-03-07-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213664 DEA: 042Q9804 EFIS: 0419000118
DIST-CO-RTE-PM	04-CC,CC,SOL-680-25.1/25.5, 0.0/0.9
Award Date	10/16/2018
Closeout Date	12/17/2019
Work Description	Repair expansion joint assembly
Location Description	Not set
QA Service Level	1 (Verified on 10/24/2018)

Sample Information

Sample Taken Date	03/07/2019	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/08/2019
Sample type	Quality Assurance	A brief description of the sample	A352 Bolt/Nut/washer Assy
The quantity of what the sample constitutes	2 lots	From where was the sample collected	Distributor
First name of sampler or witnessed by	Stacey	Last name of sampler or witnessed by	Davis
Title of sampler	QAI	Telephone number of sampler	9252121984
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Bay Bolt, Nucor, TSI, Loc-Mor	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	B362-011-19	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	6504-01 3 6504-02 3 and one quarter
Heat Number(s)	3 inch 100785759 3 and one quarter NF14202676	Nut Mfg. Lot Number(s)	3402012
Washer Mfg. Lot Number(s)	0218-761	Bolt Specification	A325
Bolt Length(s)	3" and 3.25"	Nut Specification	A563
Washer Specification	F436	Finish	HDG
Diameter/Size	1/2"	Bolt Mfg. Lot Number	3 inch 384118A 3 and one quarter 34712A
Rocap Test Requirement(s)	Long bolt test	Lubricant Requirements(s)	yes

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-03-07-2-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian	Yes	03/20/2019	A325
2019-03-07-2-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian	Yes	03/20/2019	A325
2019-03-07-2-3	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019
2019-03-07-2-4	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019
2019-03-07-2-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019
2019-03-07-2-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019
2019-03-07-2-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019
2019-03-07-2-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019
2019-03-07-2-9	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019
2019-03-07-2-10	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	03/12/2019	Brian Ewing	Yes	03/20/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-03-07-2-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-03-07-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-03-07-2-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-03-07-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-18 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-19 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-20 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-21 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-22 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-23 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-24 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-25 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-26 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-27 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-28 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-29 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-30 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-31 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-32 ASTM B499-14 (Verified)
DIME Test ID: 2019-03-07-2-33 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-07-2-34 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-07-2-35 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-07-2-36 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-07-2-37 ASTM E18-15 (Verified)
DIME Test ID: 2019-03-07-2-38 ASTM E18-15 (Verified)