Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-01-08-1
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 212185
DEA: 024G5204
EFIS: 0214000022 |
|---|
| DIST-CO-RTE-PM | 02-SHA-5-R28.0 - R29.2 |
|---|
| Award Date | 05/21/2018 |
|---|
| Closeout Date | 09/02/2020 |
|---|
| Work Description | PIT RIVER BRIDGE DECK & CATWALK REHABILITATION |
|---|
| Location Description | SHASTA COUNTY ABOUT 6 MILES NORTH OF SHASTA LAKE FROM 0.2 MILE SOUTH TO 0.9 MILE NORTH OF PIT RIVER BRIDGE OVERHEAD |
|---|
| QA Service Level | 1 (Verified on 06/05/2017) |
|---|
Sample Information
| Sample Taken Date | 01/08/2019 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 01/09/2019 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | A325 Fastener Assembly |
|---|
| The quantity of what the sample constitutes | 20 |
From where was the sample collected | Job Site |
|---|
| First name of sampler or witnessed by | Jordan |
Last name of sampler or witnessed by | Webb |
|---|
| Title of sampler | Unknown |
Telephone number of sampler | Unknown |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | Nucor |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
|---|
| Heat Number(s) | 100791937, NF09100475, NF13104445, NF15101674, 100889865, 176414 |
Nut Mfg. Lot Number(s) | 407093A |
|---|
| Washer Mfg. Lot Number(s) | 310706 |
Bolt Specification | A325 MG |
|---|
| Bolt Length(s) | 2.25", 2.5" |
Nut Specification | DH MG |
|---|
| Washer Specification | F436 MG |
Finish | MG |
|---|
| Diameter/Size | 5/8 |
Bolt Mfg. Lot Number | 411418A, 260531A, 338564A, 365183A |
|---|
| Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2019-01-08-1-12 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-13 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-14 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-15 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-16 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-17 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-18 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-19 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-20 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
| 2019-01-08-1-21 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2019 | Steven Paine | Yes | 01/17/2019 | |
|
54523545245452554526545275452854529545305453154532
