Owner Lab
- CT HQ - QASI Los Angeles Field Office
DIME Sample ID 2018-06-19-3
Sample is locked from editing. info
Project Information
Project Identifiers | DEA: No Project |
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | 11/01/2022 |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 06/19/2018 |
Sample Unique Key | 3 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 06/26/2018 |
Sample type | Acceptance |
A brief description of the sample | 3/4 x 18 anchor bolts |
The quantity of what the sample constitutes | 49 |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Ken |
Last name of sampler or witnessed by | Varela |
Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 5624407716 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | AandM Nut and Bolt |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | N/A |
Heat Number(s) | 58033665-05 |
Nut Mfg. Lot Number(s) | 17-42-067 |
Washer Mfg. Lot Number(s) | 307808 |
Bolt Specification | ASTM F1554 Gr. 55 |
Bolt Length(s) | 18 inch |
Nut Specification | ASTM A563 DH |
Washer Specification | ASTM F436 |
Finish | HDG |
Diameter/Size | 0.75 inch |
Bolt Mfg. Lot Number | 42587-PPO |
Rocap Test Requirement(s) | None |
Lubricant Requirements(s) | None |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2018-06-19-3-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Fred | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/28/2018 | Fred | Yes | 07/10/2018 | Nut Proof Load | |
2018-06-19-3-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-3 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
2018-06-19-3-10 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/29/2018 | Fred Saylor | Yes | 07/10/2018 | | |
46160462314623246233462344623546236462374623846239
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
No results found. |
Test File Attachments
DIME Test ID: 2018-06-19-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-06-19-3-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-06-19-3-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-06-19-3-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-06-19-3-5 ASTM B499-14 (Verified)
DIME Test ID: 2018-06-19-3-6 ASTM B499-14 (Verified)
DIME Test ID: 2018-06-19-3-7 ASTM B499-14 (Verified)
DIME Test ID: 2018-06-19-3-8 ASTM B499-14 (Verified)
DIME Test ID: 2018-06-19-3-9 ASTM B499-14 (Verified)
DIME Test ID: 2018-06-19-3-10 ASTM E18-15 (Verified)
DIME Test ID: 2018-06-19-3-11 ASTM E18-15 (Verified)
DIME Test ID: 2018-06-19-3-12 ASTM A370-15 (Verified)
DIME Test ID: 2018-06-19-3-13 ASTM A370-15 (Verified)